ISTAT - Italian National Institute of Statistics

DEPARTMENT FOR STATISTICAL PRODUCTION - DIRECTORATE FOR ECONOMIC STATISTICS - Structural statistics on businesses, governmental and non-profit organizations

Via Tuscolana, 1788 - 00173 Rome

Data about the Intramural R&D expenditure, R&D personnel and Researchers are disseminated. Disseminated data on the expenditures are available broken down by sector of performance (in this edition,  also by special aggregates as defined in Annex II.B to the Commission Implementing Regulation (EU) No 2020/1197 : ICT total, ICT manufacturing, ICT services), by type of cost (current costs, such as labour costs and other costs, and capital expenditure), by type of R&D (basic research, applied research, experimental development), by industry orientation, by size class, by source of funds and by source of funds and size class. Total over all sources of funds are those listed in Annex II.B to the Commission Implementing Regulation (EU) No 2020/1197 .

Data regarding the Intramural R&D expenditure in foreign-controlled enterprises and R&D personnel in foreign-controlled enterprises are also collected.

R&D personnel and Researchers are disseminated both in head count and full-time equivalent units. Data are also broken down by sector of performance (the same as the expenditures’ breakdown), by occupation (researchers and other R&D personnel), by qualification according to ISCED 2011 (level 8), by gender and by occupation and gender, by major field of research and development.

• The distribution of principal economic activity and by product field are based on Statistical classification of economic activities in the European Community (NACE Rev. 2);
• The local unit for the statistics are compiled at regional level according to NUTS 2 – Nomenclature of Territorial Units for Statistics;
• The distribution by socioeconomic objectives (SEO) are based on Nomenclature for the Analysis and Comparisons of Scientific Programmes and Budgets (NABS);
• The fields of research and development are based on Classification and distribution by Fields of Research and Development (FORD).

See below.

According to the Frascati Manual, expenditure on extramural R&D (i.e. R&D performed outside the statistical unit enterprise) is not included in intramural R&D performance totals (FM, §4.12).

See below.

See below.

The ratio of working hours actually spent on R&D during a specific reference period (the calendar year) divided by the total number of hours conventionally worked in the same period by the total personnel.

The statistical unit for BERD is the enterprise as defined by Council Regulation (EEC) No 1993/696 of 15 March 1993, – if there are deviations please explain.

See below.

The objective of the European R&D statistics is to cover all intramural R&D activities. In line with this objective the target population for the national R&D survey of the Business Enterprise Sector should consist of all R&D performing enterprises (including all R&D performers – occasional and continuous, known and unknown - in all branches and size classes) belonging to this sector. In practice however, countries in their R&D surveys might exclude some enterprises for which R&D activities are deemed to be non-existent or negligible, in order to limit the response burden or due to budgetary constraints.

The target population is the population for which inferences are made. The frame (or frames, as sometimes several frames are used) is a device that permits access to population units. The frame population is the set of population units which can be accessed through the frame and the survey data really refer to this population.

1)       i.e. enterprises previously not known or not supposed to perform R&D

Not requested. R&D statistics cover national and regional data.

Not requested. See point 3.4.

Not requested.

The data values refer to the calendar year.

See below.

- Frascati Manual 2015, Guidelines for Collecting and Reporting Data on Research and Experimental Development

- EBS Methodological Manual on R&D Statistics

Not requested.

Confidentiality, being one of the process quality components, concerns the privacy of data providers (households, enterprises, administrations and other respondents), the confidentiality of the information they provide and the extent of its use for statistical purposes.

A property of data indicating the extent to which their unauthorised disclosure could be prejudicial or harmful to the interest of the source or other relevant parties.

a)       Confidentiality protection required by law:

b)       Confidentiality commitments of survey staff:

Aggregation rules on aggregated confidential data and primary confidentiality with regard to single data values.

The release calendar for the R&S data set for business sector in question exists and it is publicly accessible.

Release calendar

Through Istat databases and information systems users can choose the information according to their needs. In some cases it is possible to build customised tables, in other cases, data are structured in prepackaged downloadable tables. Each database is accompanied by methodologies, classifications, definitions related to the topic.

The datasets are collections of data for prompt publication of the results of a statistical survey or analysis disseminated without a regular basis.

Microdata files are collections of elementary data. Referring to Istat’s surveys, these files are released free of charge and in compliance with the principle of statistical secrecy and protection of personal data.

Survey results are made available through press releases; they include forecasting and short-, medium- and long-term economic analysis and the development of microsimulation models of the effects of fiscal policies on households, businesses and institutions. 

Through Paper, electronic and interactive publications and specialist publications (Rivista di statistica ufficiale, Istat Working Papers) Istat promotes and enhances the research activity, sharing the results of studies in the field of official statistics.

The A-Z Statistics section collects all documents published on this website, in alphabetical order according to the tags that have been attributed to each one.

For journalists there is a press room. The Istat Media Relations Office is responsible for all dealings with the media – from national newspapers, magazines, broadcasters and online publications – and provides ongoing information, monitoring and support for publications, articles and television programmes. The press releases are issued by Istat press office from 10 a.m. on the date indicated, after a briefing to illustrate the main data, reserved for certified news agencies. During the briefing, journalists prepare the launch texts with no outside contact until a member of the press office staff approves the data release (lock-up system). Press office staff monitor agencies constantly throughout the briefing to ensure the embargo is respected. Accredited news agencies agree to respect this dissemination procedure. Failure to comply with the lock-up system may lead to temporary – or complete, in the case of repeated infractions – suspension of access to the press room.

Yearly

See below.

1) Y - Yes, N – No

See below.

1) Y – Yes, N - No 

Italian Business R&D statistics are available at I.stat (http://dati.istat.it/), a warehouse of statistics currently produced by Istat. And the historical data from 1963 are available at the following Istat web page: http://seriestoriche.istat.it/

Not requested.

See below.

See below.

Not requested.

1) Y – Yes, N - No 

Methodological note in specific Report

Not requested.

See below.

Quality tools have been developed by Istat in order to improve the quality of statistical processes and products, consistently with Istat’s mission and according to the quality framework of the European Statistical System.

The Quality Guidelines are among these tools which Istat set up initially only for statistics from surveys, and subsequently also for processes using administrative sources.

For transparency purposes, the quality documentation of Istat statistical processes is available through:

• the Information system on quality (SIQual) containing all metadata describing each production process and its features
• Quality at a glance, standard summary reports for each Istat survey
• The National Quality Reports (Schede Standard di Qualità, only available in Italian), more extensive and detailed reports for expert users, including quantitative indicators on process quality, harmonised with European standards.

The survey provides a highly consistent information on the trend of R&D expenditure and personnel of the Italian enterprises since the data concerning the largest enterprises (with at least 100 persons employed) that are also the the greatest R&D performers are carefully monitored.
Since 2016 ISTAT has implemented an imputation method to take into account the non response units. This action has allowed to overcome the previous problem of “under-estimations” of the Italian business R&D expenditures and personnel and to to improve the quality of final results. It’s a partial imputation of 'Non response units' because just the units that in the previous two surveys (undertaken with reference to 2019 and 2020) gave 2021 preliminary R&D data were considered in the imputation process. In particular, in this process - based on a predictive regression imputation, applied to the two key variables (R&D expenditure and R&D personnel in fte) – 1,646 non response enterprises were involved in the 2021 edition of BES R&D survey. 

See below.

1)       Users' class codification

1- Institutions:
• European level: Commission (DGs, Secretariat General), Council, European Parliament, ECB, other European agencies etc.
• in Member States, at the national or regional level: Ministries of Economy or Finance, other ministries (for sectoral comparisons), National Statistical Institutes and other statistical agencies (norms, training, etc.), and
• International organisations: OECD, UN, IMF, ILO, etc.

2- Social actors: Employers’ associations, trade unions, lobbies, among others, at the European, national or regional level.

3- Media: International or regional media – specialized or for the general public – interested both in figures and analyses or comments. The media are the main channels of statistics to the general public.

4- Researchers and students (Researchers and students need statistics, analyses, ad hoc services, access to specific data.)

5- Enterprises or businesses (Either for their own market analysis, their marketing strategy (large enterprises) or because they offer consultancy services)

6- Other (User class defined for national purposes, different from the previous classes. )

To evaluate if users' needs have been satisfied, the best way is to use user satisfaction surveys.

See below.

Not applicable.

Completeness is assessed via comparison of the data delivered against the requirements of Commission Implementing Regulation (EU) No 2020/1197.

Criteria:

A) Obligatory data. Only 'Very Good' = 100%, Poor' >95%; 'Very Poor' <100% apply.

B) Optional data. 'Very Good' = 100%; 'Good' = >75%; 'Satisfactory' 50 to 75%%; 'Poor' 25 to 50%; 'Very Poor' 0 to 25%.

See below.

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) This question is optional. It refers to variables and breakdowns NOT asked by the Commission Implementing Regulation (EU) No 2020/1197 (neither as 'optional'), if R&D data for BES are collected for additional breakdowns or/and at more detailed level than requested.

2) Y-start year

Accuracy in the statistical sense denotes the closeness of computations or estimates to the exact or true values. Statistics are not equal with the true values because of variability (the statistics change from implementation to implementation of the survey due to random effects) and bias (the average of the possible values of the statistics from implementation to implementation is not equal to the true value due to systematic effects).

Several types of statistical errors occur during the survey process. The following typology of errors has been adopted:

1. Sampling errors. These only affect sample surveys. They are due to the fact that only a subset of the population, usually randomly selected, is enumerated.

2. Non-sampling errors. Non-sampling errors affect sample surveys and complete enumerations alike and comprise:

a) Coverage errors,

b) Measurement errors,

c) Non response errors and

d) Processing errors.

Model assumption errors should be treated under the heading of the respective error they are trying to reduce.

1)  Ranking of the type(s) of errors that result in over/under-estimation, from the most important source of error (1) to the least important source of error (5). In the event that errors of a particular type do not exist, is used the sign ‘-‘.

2)  The perceived direction of the ‘overall’ error using the signs “+” for over estimation, “-” for under estimation and “+/-” when assumption of the direction of the error cannot be made for R&D.

1) 'Very Good' = High level of coverage (annual rate of substitution in the target population lower than 5%). High average rates of response (>80%) in census and sample surveys (BES R&D). Full data consistency with reference to totals and relationships between variables in the dataset sent to Eurostat.  

2) 'Good' = In the event that at least one out of the three criteria above described would not be fully met.

3) 'Satisfactory' = In the event that the average rate of response would be lower than 60% even by meeting the two remaining criteria.

4) 'Poor' = In the event that the average rate of response would be lower than 60% and at least one of the two remaining criteria would not be met.

5) 'Very Poor' = If all the three criteria are not met.

That part of the difference between a population value and an estimate thereof, derived from a random sample, which is due to the fact that only a subset of the population is enumerated.

The main indicator used to measure sampling errors is the coefficient of variation (CV).
Definition of coefficient of variation:
CV= (Square root of the estimate of the sampling variance) / (Estimated value)

Not applicable.

1)        Industry sector (NACE Rev. 2: 01-03, 05-09, 10-33, 35, 36-39, 41-43)

2)        Services sector (NACE Rev 2.: 45-47,49-53,55-56,58-63,64-66 68,69-75,77-82,84,85,86-88,90-93,94-96,97-98,99)

Non-sampling errors occur in all phases of a survey. They add to the sampling errors (if present) and contribute to decreasing overall accuracy. It is important to assess their relative weight in the total error and devote appropriate resources for their control and assessment.

Coverage errors (or frame errors) are due to divergences between the target population and the frame population. The frame population is the set of target population members that has a chance to be selected into the survey sample. It is a listing of all items in the population from which the sample is drawn that contains contact details as well as sufficient information to perform stratification and sampling.

a)       Description/assessment of coverage errors:

b)       Measures taken to reduce their effect:

Magnitude of error (%) = (Observed Value-True Value)/ True Value (%) 

Not requested.

Misclassification rate measures the percentage of enterprises that changed stratum between the time the frame was last updated and the time the survey was carried out. It is defined as the number of enterprises that changed stratum divided by the number of enterprises which belong to the stratum, according to the frame. The rate can be estimated based on the characteristics of the surveyed enterprises.

Measurement errors occur during data collection and generate bias by recording values different than the true ones (e.g. difficulty to distinguish intramural from extramural R&D Expenditure). The survey questionnaire used for data collection may have led to the recording of wrong values, or there may be respondent or interviewer bias.

a)       Description/assessment of measurement errors:

b)      Measures taken to reduce their effect:

Non-response occurs when a survey failed to collect data on all survey variables from all the population units designated for data collection in a sample or complete enumeration.

There are two elements of non-response:

- Unit non-response, which occurs when no data (or so little as to be unusable) are collected on a designated population unit.

- Item non-response, which occurs when data only on some, but not all survey variables are collected on a designated population unit.

The extent of response (and accordingly of non response) is also measured with response rates.

The main interest is to judge if the response from the target population was satisfying by computing the weighted and un-weighted response rate.
Definition:
Eligible are the sample units which indeed belong to the target population. Frame imperfections always leave the possibility that some sampled units may not belong to the target population. Moreover, when there is no contact with sample units and no other way to establish their eligibility they are characterised as ‘unknown eligibility units’
Definition:
Un-weighted Unit Non- Response Rate = 1 - (Number of units with a response) / (Total number of eligible and unknown eligibility units in the survey) 
Weighted Unit Non- Response Rate = 1 - (Total weighted responding units) / (Total weighted number of eligible / unknown eligibility units in the sample)

1)        Industry (NACE Rev. 2: 01-03, 05-09,10-33,35,36-39,41-43)

2)        Services (NACE Rev 2.: 45-47,49-53,55-56,58-63,64-66 68,69-75,77-82,84,85,86-88,90-93,94-96,97-98,99)

Two e-mail reminders are usually undertaken before coding an enterprise as “non respondent”. As to the largest R&D performers, several phone reminders are performed in order to receive their questionnaire properly filled.

Definition:
Un-weighted Item non-Response Rate (%) = 1-(Number of units with a response for the item) / (Total number of eligible , for the item, units in the sample) * 100

Between data collection and the beginning of statistical analysis, data must undergo a certain processing: coding, data entry, data editing, imputation, etc. Errors introduced at these stages are called processing errors. Data editing identifies inconsistencies or errors in the data.

Not requested.

Timeliness and punctuality refer to time and dates, but in a different manner: the timeliness of statistics reflects the length of time between their availability and the event or phenomenon they describe. Punctuality refers to the time lag between the release date of the data and the target date on which they should have been delivered, with reference to dates announced in the official release calendar.

Time lag between the end of reference period and the release date of the results:
Indicator: (Release date of provisional/ first results) - (Date of reference for the data)

a) End of reference period: 2021

b) Date of first release of national data: September 2023

c) Lag (days):

a) End of reference period:

b) Date of first release of national data:

c) Lag (days):

Punctuality refers to the time lag between the release date of data and the target date on which they were scheduled for release as announced officially.

Punctuality of time schedule of data release = (Actual date of the data release) - (Scheduled date of the data release).

See below.

Not requested.

As from 1991 extramural expenditure is collected separately in Italian R&D surveys and can thus be excluded from the data.

The following table lists a number of key survey concepts and conceptual issues; it gives reference to the Commission Implementing Regulation (EU) No 2020/1197 or Frascati manual and EBS Methodological Manual on R&D Statistics paragraphs with recommendations about these concepts / issues.

The following table lists a number of key methodological issues, which may affect the international comparability of national R&D statistics. The table gives the references in the Frascati manual, where related recommendations are made. Countries are asked to report on the existence of any deviations from existing recommendations and comment upon.

See below.

See below.

1)       Breaks years are years for which data are not fully comparable to the previous period.

Data produced in the same way in the odd and even years.

This part deals with any national coherence assessments which may have been undertaken. It reports results for variables which are the same or relevant to R&D statistics, from other national surveys and / or administrative sources and explains and comments on their degree of agreement with R&D statistics.  Intramural R & D expenditure (code 230101 in the Commission Implementing Regulation (EU) 2020/1197) and R & D personnel (code 230201) are surveyed also in foreign-controlled EU enterprises statistics (inward FATS).

The Community innovation survey 2020 (CIS2020) (inn_cis12) (europa.eu) also collects the R&D expenditure of enterprises that form the coverage of the CIS2020 survey. 

Not requested.

Data on R&D expenditure and expecially the breakdown by type of costs are yearly used by the SNA in their calculations.

Data on R&D expenditure are yearly used by the inward FATS for the C&C data procedure.

See below.

This part compares key R&D variables as preliminary and final data.

(1)    Calculate the average remuneration (cost) of individuals belonging to the internal R&D personnel, excluding those who are only formally ‘employees’ (university students, grant holders, etc.).

(2)    Calculate the average remuneration (cost) of individuals belonging to the external R&D personnel (FTEs/other current R&D costs for external R&D personnel).

The assessment of costs associated with a statistical product is a rather complicated task since there must exist a mechanism for appointing portions of shared costs (for instance shared IT resources and dissemination channels) and overheads (office space, utility bills etc). The assessment must become detailed and clear enough so that international comparisons among agencies of different structures are feasible. 

1)       The shares of the figures given in the first column that are accounted for by payments to private firms or other Government agencies.

1)        T = the time required to provide the information, including time spent assembling information prior to completing a form or taking part in interview and the time taken up by any subsequent contacts after receipt of the questionnaire (‘Re-contact time’)

Not requested.

Not requested.

Not requested.

Several separate activities are used for the collection of raw data or pre-compiled administrative data and statistics related to R&D. For simplicity, we call them surveys irrespective of whether they are sample surveys, censuses, collections of administrative data/pre-compiled statistics. This section presents the names of the surveys by sector of performance as well as methodological information for each survey. Depending on the type of survey and sector of performance, only the sections corresponding to that survey and sector are filled in.

See 12.3.3.

See below.

The validation activities consist of:

- checking the quality of population coverage;
- monitoring that the response rate is good;
- detecting and correcting individual errors in data records through a set of edits (checks for identifying routing errors, coding errors, inconsistencies, outliers and missing answers) that are performed for Bes R&D survey;
- contacting the respondent concerning inconsistencies, errors or missing data;
- comparing the 2021 data with the 2020 data at micro, whereas the respondents had already filled in questionnaire in the previous edition;
- comparing the 2021 data with the 2020 data at macro level.

See below.

Imputation is the method of creating plausible (but artificial) substitute values for all those missing.
Definition:
Imputation rate (for the variable x) % = (Number of imputed records for the variable x) / (Total number of possible records for x)*100

1)       Industry (NACE Rev. 2: 01-03, 05-09,10-33,35,36-39,41-43)

2)       Services (NACE Rev 2.: 45-47, 49-53, 55-56, 58-63, 64-66 68, 69-75, 77-82, 84, 85, 86-88, 90-93, 94-96, 97-98, 99)

Not requested.

Not requested.

The survey provides a highly consistent information on the trend of R&D expenditure and personnel of the Italian enterprises since the data concerning the largest enterprises are carefully monitored. Since 2016, ISTAT has implemented an imputation method to take into account the non response units. This action has allowed to overcome the previous problem of “under-estimations” of the Italian business R&D expenditures and personnel and to to improve the quality of final results. From 2020 we implemented the statistical unit 'Enterprise' in the survey in the following way: we collected the data using as reporting unit the 'legal unit', but we produce the final estimates using as unit of analysis the 'Enterprise'.