Statistical Service of Cyprus (CYSTAT)

Science and Technology Statistics Unit

Statistical Service of Cyprus

CY-1444

Nicosia

Cyprus

Statistics on Business enterprise R&D (BERD) measure research and experimental development (R&D) performed in the business enterprise sector, i.e. R&D expenditure and R&D personnel. In line with this objective the target population for the national R&D survey of the business enterprise sector consist of all R&D performing enterprises (including all R&D performers – occasional and continuous, known and unknown - in all branches and size classes) belonging to this sector. The “enterprise” is defined in Council Regulation (EEC) No 1993/696 of 15 March 1993. The results are related to the population of all R&D performing enterprises classified in Sections A to U of the common statistical classification of economic activities as established by Regulation (EC) No 1893/2006 of the European Parliament and of the Council (NACE Rev.2).

The main concepts and definitions used for the production of R&D statistics are given by OECD (2015), Frascati Manual 2015: Guidelines for Collecting and Reporting Data on Research and Experimental Development, The Measurement of Scientific, Technological and Innovation Activities, which is the internationally recognised standard methodology for collecting R&D statistics and by Eurostat’s European Business Statistics Methodological Manual on R&D Statistics. (EBS Methodological Manual on R&D Statistics).

Since the beginning of 2021, the collection of R&D statistics is based on Commission Implementing Regulation (EU) No 2020/1197 of 30 July 2020. The Regulation sets the framework for the collection of R&D statistics and specifies the main variables of interest and their breakdowns at predefined level of detail. Statistics on science, technology and innovation were collected until the end of 2020 based on Commission Implementing  Regulation (EU) No 2012/995 concerning the production and development of Community statistics on science and technology.

• The distribution of principal economic activity and by product field are based on Statistical classification of economic activities in the European Community (NACE Rev. 2);
• The local unit for the statistics are compiled at regional level according to NUTS 2 – Nomenclature of Territorial Units for Statistics;
• The distribution by socioeconomic objectives (SEO) are based on Nomenclature for the Analysis and Comparisons of Scientific Programmes and Budgets (NABS);
• The fields of research and development are based on Classification and distribution by Fields of Research and Development (FORD).

See below.

According to the Frascati Manual, expenditure on extramural R&D (i.e. R&D performed outside the statistical unit enterprise) is not included in intramural R&D performance totals (FM, §4.12).

See below.

See below.

The Full-time Equivalent (F.T.E.) expresses the total time devoted to research by a person during one year.  One F.T.E. may be thought of as one person-year which corresponds to one person working full-time on R&D during one year.  Thus, a person who normally spends 30% of his time on R&D and the remaining 70% on other activities should be considered as 30/100 = 0,3 person-years.  Three persons who spend 30%, 50% and 80% of their time on R&D activities correspond to 0,3 + 0,5 + 0,8 = 1,6 person-years.

The statistical unit for BERD is the enterprise as defined by Council Regulation (EEC) No 1993/696 of 15 March 1993

For Cyprys, the statistical unit and the reporting unit are the same and is the enterprise.

No deviation from the mandatory use of the 'enterprise' as statistical unit for business R&D statistics exist.

See below.

The objective of the European R&D statistics is to cover all intramural R&D activities. In line with this objective the target population for the national R&D survey of the Business Enterprise Sector should consist of all R&D performing enterprises (including all R&D performers – occasional and continuous, known and unknown - in all branches and size classes) belonging to this sector. In practice however, countries in their R&D surveys might exclude some enterprises for which R&D activities are deemed to be non-existent or negligible, in order to limit the response burden or due to budgetary constraints.

The target population is the population for which inferences are made. The frame (or frames, as sometimes several frames are used) is a device that permits access to population units. The frame population is the set of population units which can be accessed through the frame and the survey data really refer to this population.

1)       i.e. enterprises previously not known or not supposed to perform R&D

Government controlled areas of the Republic of Cyprus.

Not requested. See point 3.4.

Not requested.

The units of measures used for the data set disseminated are Euro, %, number of persons.

Calendar year 2021

Article 3 of the national Official Statistics Law, No. 25(I) of 2021 defines the functions of the Statistical Service of Cyprus regarding the production and dissemination of official statistics. Moreover, Article 13, explicitly stipulates the mandate for data collection and introduces a mandatory response to statistical enquiries by stipulating the obligation of respondents to reply to surveys and provide the data required. This relates not only to national but also to European statistics which, by virtue of Article 8 of the said Law, are incorporated in the annual and multiannual programmes of work without any further procedure.

- Frascati Manual 2015, Guidelines for Collecting and Reporting Data on Research and Experimental Development

- EBS Methodological Manual on R&D Statistics

Not requested.

Confidentiality, being one of the process quality components, concerns the privacy of data providers (households, enterprises, administrations and other respondents), the confidentiality of the information they provide and the extent of its use for statistical purposes.

A property of data indicating the extent to which their unauthorised disclosure could be prejudicial or harmful to the interest of the source or other relevant parties.

a)       Confidentiality protection required by law: Official Statistics Law No. 25(I) of 2021

b)       Confidentiality commitments of survey staff: Official Statistics Law No. 25(I) of 2021

Official statistics are released in accordance to all confidentiality provisions of the following:

• National Official Statistics Law No. 25(I) of 2021 (especially Article 16 on statistical confidentiality).
• Regulation (EC) No 223/2009 of the European Parliament and of the Council of 11 March 2009 on European statistics and its later amendments (especially Chapter 5 on statistical confidentiality).
• European Statistics Code of Practice (especially Principle 5 on statistical confidentiality).
• Guidelines for the Protection of Confidential Data.

• Official Statistics Law No. 25(I) of 2021: https://www.cystat.gov.cy/en/StaticPage?id=1074  

• Regulation (EC) No 223/2009 on European statistics (consolidated text): http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:02009R0223-20150608&qid=1504858409240&from=EN
• European Statistics Code of Practice: http://ec.europa.eu/eurostat/web/products-manuals-and-guidelines/-/KS-32-11-955

• Guidelines for the Protection of Confidential Data: https://www.cystat.gov.cy/en/StaticPage?id=1066

The survey is carried out in accordance to the Official Statistics Law No. 25(I) of 2021.  The Statistical Service is bound, under the provisions of the Statistics Law, to treat all information collected as confidential. All collected information and data are used solely for statistical purposes. Data on individual enterprise cannot be published or disclosed to either public bodies or private individuals.

The treatment of confidential data is regulated by Guidelines for the Protection of Confidential Data.

 Guidelines for the Protection of Confidential Data: https://www.cystat.gov.cy/en/StaticPage?id=1066

Notifications about the dissemination of statistics are published in the release calendar, which is available on CYSTAT’s web portal. The annual release calendar, announced during the 4^th quarter of the year, includes provisional dates of publication for the following year, which are finalized the week before publication.

Link to CYSTAT’s release calendar: https://www.cystat.gov.cy/en/AnnouncementList

According to the Dissemination and Pricing Policy of the Statistical Service of Cyprus (section 2.3) CYSTAT΄s main channel for dissemination of statistics is the web portal, which offers the same conditions to everyone and is updated at the same time every working day (12:00 noon). No privileged pre-released access is granted.

In addition to the annual release calendar, users are informed of the various statistical releases through the “Alert” service provided by CYSTAT.

Dissemination and Pricing Policy of the Statistical Service of Cyprus: https://www.cystat.gov.cy/en/StaticPage?id=1064

Frequency of data dissemination: Yearly

See below.

1) Y - Yes, N – No

See below.

1) Y – Yes, N - No 

Not available.

Not requested.

See below.

See below.

Not requested.

1) Y – Yes, N - No 

https://www.cystat.gov.cy/en/MethodologicalDisplay?s=49

Not requested.

See below.

The quality of statistics in CYSTAT is managed in the framework of the European Statistics Code of Practice which sets the standards for developing, producing and disseminating European Statistics as well as the ESS Quality Assurance Framework (QAF). CYSTAT endorses the Quality Declaration of the European Statistical System. In addition, CYSTAT is guided by the requirements provided for in Article 11 of the Official Statistics Law No. 25(I) of 2021 as well as Article 12 of Regulation (EC) No 223/2009 on European statistics, which sets out the quality criteria to be applied in the development, production and dissemination of European statistics.

• European Statistics Code of Practice: http://ec.europa.eu/eurostat/web/products-manuals-and-guidelines/-/KS-32-11-955

• ESS Quality Assurance Framework (QAF): http://ec.europa.eu/eurostat/documents/64157/4392716/ESS-QAF-V1-2final.pdf/bbf5970c-1adf-46c8-afc3-58ce177a0646

• Quality Declaration of the European Statistical System: http://ec.europa.eu/eurostat/documents/4031688/8188985/KS0217428ENN_corr.pdf/116f7c85-cd3e-4bff-b695-4a8e71385fd4

• Official Statistics Law No. 25(I) of 2021: https://www.cystat.gov.cy/en/StaticPage?id=1074

• Regulation (EC) No 223/2009 on European statistics (consolidated text): http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:02009R0223-20150608&qid=1504858409240&from=EN

The R&D data on the BES sector in Cyprus are assessed as being of high quality. The definitions, concepts and methodology used are in compliance with the requirements of Eurostat and follow the guidelines of the Frascati Manual 2015. The national R&D survey is a well established survey which yields the maximum of the information required on an annual basis and with a comparatively short time lag from the end of the reference period. Although the register of all possible R&D performing enterprises is regularly updated, it is likely that there is an under coverage of R&D in small enterprises or in the services sectors. However, the effect on total business enterprise R&D is not significant, as all the important R&D performers are included in any case.

See below.

1)       Users' class codification

1- Institutions:
• European level: Commission (DGs, Secretariat General), Council, European Parliament, ECB, other European agencies etc.
• in Member States, at the national or regional level: Ministries of Economy or Finance, other ministries (for sectoral comparisons), National Statistical Institutes and other statistical agencies (norms, training, etc.), and
• International organisations: OECD, UN, IMF, ILO, etc.

2- Social actors: Employers’ associations, trade unions, lobbies, among others, at the European, national or regional level.

3- Media: International or regional media – specialized or for the general public – interested both in figures and analyses or comments. The media are the main channels of statistics to the general public.

4- Researchers and students (Researchers and students need statistics, analyses, ad hoc services, access to specific data.)

5- Enterprises or businesses (Either for their own market analysis, their marketing strategy (large enterprises) or because they offer consultancy services)

6- Other (User class defined for national purposes, different from the previous classes. )

To evaluate if users' needs have been satisfied, the best way is to use user satisfaction surveys.

See below.

Not available.

Completeness is assessed via comparison of the data delivered against the requirements of Commission Implementing Regulation (EU) No 2020/1197.

Criteria:

A) Obligatory data. Only 'Very Good' = 100%, Poor' >95%; 'Very Poor' <100% apply.

B) Optional data. 'Very Good' = 100%; 'Good' = >75%; 'Satisfactory' 50 to 75%%; 'Poor' 25 to 50%; 'Very Poor' 0 to 25%.

See below.

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) This question is optional. It refers to variables and breakdowns NOT asked by the Commission Implementing Regulation (EU) No 2020/1197 (neither as 'optional'), if R&D data for BES are collected for additional breakdowns or/and at more detailed level than requested.

2) Y-start year

Accuracy in the statistical sense denotes the closeness of computations or estimates to the exact or true values. Statistics are not equal with the true values because of variability (the statistics change from implementation to implementation of the survey due to random effects) and bias (the average of the possible values of the statistics from implementation to implementation is not equal to the true value due to systematic effects).

Several types of statistical errors occur during the survey process. The following typology of errors has been adopted:

1. Sampling errors. These only affect sample surveys. They are due to the fact that only a subset of the population, usually randomly selected, is enumerated.

2. Non-sampling errors. Non-sampling errors affect sample surveys and complete enumerations alike and comprise:

a) Coverage errors,

b) Measurement errors,

c) Non response errors and

d) Processing errors.

Model assumption errors should be treated under the heading of the respective error they are trying to reduce.

1)  Ranking of the type(s) of errors that result in over/under-estimation, from the most important source of error (1) to the least important source of error (5). In the event that errors of a particular type do not exist, is used the sign ‘-‘.

2)  The perceived direction of the ‘overall’ error using the signs “+” for over estimation, “-” for under estimation and “+/-” when assumption of the direction of the error cannot be made for R&D.

1) 'Very Good' = High level of coverage (annual rate of substitution in the target population lower than 5%). High average rates of response (>80%) in census and sample surveys (BES R&D). Full data consistency with reference to totals and relationships between variables in the dataset sent to Eurostat.  

2) 'Good' = In the event that at least one out of the three criteria above described would not be fully met.

3) 'Satisfactory' = In the event that the average rate of response would be lower than 60% even by meeting the two remaining criteria.

4) 'Poor' = In the event that the average rate of response would be lower than 60% and at least one of the two remaining criteria would not be met.

5) 'Very Poor' = If all the three criteria are not met.

That part of the difference between a population value and an estimate thereof, derived from a random sample, which is due to the fact that only a subset of the population is enumerated.

The main indicator used to measure sampling errors is the coefficient of variation (CV).
Definition of coefficient of variation:
CV= (Square root of the estimate of the sampling variance) / (Estimated value)

Not applicable.

1)        Industry sector (NACE Rev. 2: 01-03, 05-09, 10-33, 35, 36-39, 41-43)

2)        Services sector (NACE Rev 2.: 45-47,49-53,55-56,58-63,64-66 68,69-75,77-82,84,85,86-88,90-93,94-96,97-98,99)

Non-sampling errors occur in all phases of a survey. They add to the sampling errors (if present) and contribute to decreasing overall accuracy. It is important to assess their relative weight in the total error and devote appropriate resources for their control and assessment.

Coverage errors (or frame errors) are due to divergences between the target population and the frame population. The frame population is the set of target population members that has a chance to be selected into the survey sample. It is a listing of all items in the population from which the sample is drawn that contains contact details as well as sufficient information to perform stratification and sampling.

a)       Description/assessment of coverage errors: Not applicable

b)       Measures taken to reduce their effect: Not applicable

Magnitude of error (%) = (Observed Value-True Value)/ True Value (%) 

Not requested.

Misclassification rate measures the percentage of enterprises that changed stratum between the time the frame was last updated and the time the survey was carried out. It is defined as the number of enterprises that changed stratum divided by the number of enterprises which belong to the stratum, according to the frame. The rate can be estimated based on the characteristics of the surveyed enterprises.

Measurement errors occur during data collection and generate bias by recording values different than the true ones (e.g. difficulty to distinguish intramural from extramural R&D Expenditure). The survey questionnaire used for data collection may have led to the recording of wrong values, or there may be respondent or interviewer bias.

a)       Description/assessment of measurement errors: No measurement errors exist.

b)      Measures taken to reduce their effect: The data collection and processing phase is managed by a highly skilled person who is working in the field for more than 22 years. Information providers, in most cases, stay the same for years and, consequently, are very well aware of the questionnaire and the relevant concepts and definitions. Regular contacts by telephone or e-mail and, in some cases, personal interviews, are also made to provide clarifications and assistance and to check and correct possible inconsistencies and oversights in the questionnaires received. The data reported are also checked against administrative records kept by the Research & Innovation Foundation, which is the national institute for the promotion of scientific and technological research in Cyprus. The CORDIS database, as well as the web sites of various funding agencies and programmes, is also frequently consulted in order to identify any possible research activities that the information providers may have failed to report.

Non-response occurs when a survey failed to collect data on all survey variables from all the population units designated for data collection in a sample or complete enumeration.

There are two elements of non-response:

- Unit non-response, which occurs when no data (or so little as to be unusable) are collected on a designated population unit.

- Item non-response, which occurs when data only on some, but not all survey variables are collected on a designated population unit.

The extent of response (and accordingly of non response) is also measured with response rates.

The main interest is to judge if the response from the target population was satisfying by computing the weighted and un-weighted response rate.
Definition:
Eligible are the sample units which indeed belong to the target population. Frame imperfections always leave the possibility that some sampled units may not belong to the target population. Moreover, when there is no contact with sample units and no other way to establish their eligibility they are characterised as ‘unknown eligibility units’
Definition:
Un-weighted Unit Non- Response Rate = 1 - (Number of units with a response) / (Total number of eligible and unknown eligibility units in the survey) 
Weighted Unit Non- Response Rate = 1 - (Total weighted responding units) / (Total weighted number of eligible / unknown eligibility units in the sample)

1)        Industry (NACE Rev. 2: 01-03, 05-09,10-33,35,36-39,41-43)

2)        Services (NACE Rev 2.: 45-47,49-53,55-56,58-63,64-66 68,69-75,77-82,84,85,86-88,90-93,94-96,97-98,99)

There is no unit non-response.

Definition:
Un-weighted Item non-Response Rate (%) = 1-(Number of units with a response for the item) / (Total number of eligible , for the item, units in the sample) * 100

Between data collection and the beginning of statistical analysis, data must undergo a certain processing: coding, data entry, data editing, imputation, etc. Errors introduced at these stages are called processing errors. Data editing identifies inconsistencies or errors in the data.

Not requested.

Timeliness and punctuality refer to time and dates, but in a different manner: the timeliness of statistics reflects the length of time between their availability and the event or phenomenon they describe. Punctuality refers to the time lag between the release date of the data and the target date on which they should have been delivered, with reference to dates announced in the official release calendar.

Time lag between the end of reference period and the release date of the results:
Indicator: (Release date of provisional/ first results) - (Date of reference for the data)

a) End of reference period: No release of provisional national data.

b) Date of first release of national data: No release of provisional national data.

c) Lag (days): No release of provisional national data.

a) End of reference period: 2021 (T)

b) Date of first release of national data: T+19 months

c) Lag (days): 0 days

Punctuality refers to the time lag between the release date of data and the target date on which they were scheduled for release as announced officially.

Punctuality of time schedule of data release = (Actual date of the data release) - (Scheduled date of the data release).

See below.

Not requested.

No comments.

The following table lists a number of key survey concepts and conceptual issues; it gives reference to the Commission Implementing Regulation (EU) No 2020/1197 or Frascati manual and EBS Methodological Manual on R&D Statistics paragraphs with recommendations about these concepts / issues.

The following table lists a number of key methodological issues, which may affect the international comparability of national R&D statistics. The table gives the references in the Frascati manual, where related recommendations are made. Countries are asked to report on the existence of any deviations from existing recommendations and comment upon.

See below.

See below.

1)       Breaks years are years for which data are not fully comparable to the previous period.

All data are produced in the same way in the odd and even years.

This part deals with any national coherence assessments which may have been undertaken. It reports results for variables which are the same or relevant to R&D statistics, from other national surveys and / or administrative sources and explains and comments on their degree of agreement with R&D statistics.  Intramural R & D expenditure (code 230101 in the Commission Implementing Regulation (EU) 2020/1197) and R & D personnel (code 230201) are surveyed also in foreign-controlled EU enterprises statistics (inward FATS).

The Community innovation survey 2020 (CIS2020) (inn_cis12) (europa.eu) also collects the R&D expenditure of enterprises that form the coverage of the CIS2020 survey. 

Not requested.

R&D statistics are fully reconcilable with National Accounts.

R&D statistics are fully reconcilable with the statistics for Foreign-controlled EU enterprises – inward FATS.

See below.

This part compares key R&D variables as preliminary and final data.

(1)    Calculate the average remuneration (cost) of individuals belonging to the internal R&D personnel, excluding those who are only formally ‘employees’ (university students, grant holders, etc.).

(2)    Calculate the average remuneration (cost) of individuals belonging to the external R&D personnel (FTEs/other current R&D costs for external R&D personnel).

The assessment of costs associated with a statistical product is a rather complicated task since there must exist a mechanism for appointing portions of shared costs (for instance shared IT resources and dissemination channels) and overheads (office space, utility bills etc). The assessment must become detailed and clear enough so that international comparisons among agencies of different structures are feasible. 

1)       The shares of the figures given in the first column that are accounted for by payments to private firms or other Government agencies.

1)        T = the time required to provide the information, including time spent assembling information prior to completing a form or taking part in interview and the time taken up by any subsequent contacts after receipt of the questionnaire (‘Re-contact time’)

A data revision policy is in place at CYSTAT. It is published on CYSTAT’s web portal, at the following link:

https://www.cystat.gov.cy/en/StaticPage?id=1072

CYSTAT also publishes a list of scheduled revisions (regular or major revisions), also published on its web portal, at the following link:

https://www.cystat.gov.cy/en/AnnouncementList

Not requested.

Not requested.

Several separate activities are used for the collection of raw data or pre-compiled administrative data and statistics related to R&D. For simplicity, we call them surveys irrespective of whether they are sample surveys, censuses, collections of administrative data/pre-compiled statistics. This section presents the names of the surveys by sector of performance as well as methodological information for each survey. Depending on the type of survey and sector of performance, only the sections corresponding to that survey and sector are filled in.

See 12.3.3.

See below.

Validation activities include: checking that the population coverage and response rates are as required; comparing the statistics with previous cycles; confronting the statistics against other relevant data (both internal and external); investigating inconsistencies in the statistics; verifying the statistics against expectations and domain intelligence, outlier detection.

See below.

Imputation is the method of creating plausible (but artificial) substitute values for all those missing.
Definition:
Imputation rate (for the variable x) % = (Number of imputed records for the variable x) / (Total number of possible records for x)*100

1)       Industry (NACE Rev. 2: 01-03, 05-09,10-33,35,36-39,41-43)

2)       Services (NACE Rev 2.: 45-47, 49-53, 55-56, 58-63, 64-66 68, 69-75, 77-82, 84, 85, 86-88, 90-93, 94-96, 97-98, 99)

Not requested.

Not requested.