TOPIC : Pilot lines for metal Additive Manufacturing (IA 50%)
|Publication date:||27 October 2017|
|Focus area:||Digitising and transforming European industry and services (DT)|
|Types of action:||IA Innovation action|
|DeadlineModel: Opening date:||single-stage 31 October 2017||Deadline:||22 February 2018 17:00:00|
|Time Zone : (Brussels time)|
Topic DescriptionSpecific Challenge:
Costs and unpredictable defects in final parts and products are preventing complete deployment and adoption of Additive Manufacturing (AM) in the metalworking industries.
The industrial demonstration in a pilot line will show the full potential of metal AM in real manufacturing conditions and it will serve as a flagship example for other stakeholders. Quality aspects to be significantly improved include robustness, stability, repeatability, speed and right-first-time manufacturing.Scope:
- Multi-scale and multi-physics simulations of the process and of the whole system from the early design phase, to avoid costly trial and error runs. The prediction and minimisation of distortion and their effect on durability and expected lifetime for post processing steps will also avoid propagation of defects to downstream stages;
- In-line non-destructive testing and in-situ analysis of product, including metrology aspects;
- Integration and inter-operability of AM processes into multi-stage production systems, with in-process monitoring, feedback and control;
- Hybridisation of Additive Manufacturing with other manufacturing and assembling processes;
- Certification, regulatory and standardisation activities related to the proposed solutions and AM produced parts;
- Occupational exposure in terms of health, safety and environment should be carefully observed together with the recycling of unused materials.
Proposals are expected to cover demonstration activities driven by the industrial community.
Activities should start at TRL 5 and achieve TRL 7 at the end of the project.
The Commission considers that proposals requesting a contribution from the EU between EUR 12 and 15 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
As an exception from General Annex D, the funding rate for eligible costs in grants awarded under this topic will be differentiated: 100% of the eligible costs for beneficiaries and linked third parties that are non-profit legal entities; and 50% of the eligible costs for beneficiaries and linked third parties that are for profit legal entities.Expected Impact:
- Increase in robustness of metal AM-based processes by 40% and production speeds by 25%;
- Reduction of time to market by 25% and ‘right first time’ capability by 40%;
- Reduction of uncertainties of selected material quality parameters by 50%, resulting in improving product quality by 40%;
- New certification schemes for industrial "3D-Printed" parts and products in collaboration with relevant certification stakeholders;
- New standardisation of specific categories not included in current ISO/ASTM/CEN CENELEC TCs.
Relevant indicators and metrics, with baseline values, should be clearly stated in the proposal.Cross-cutting Priorities:
Topic conditions and documents
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
- Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.
- Submission and evaluation processes are described in the Online Manual.
The following exceptions apply:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
Under 3 (a) Proposals are first ranked in separate lists according to the topics against which they were submitted (‘topic ranked lists’). When comparing ex aequo proposals from different topics, proposals having a higher position in their respective 'topic ranked list' will be considered to have a higher priority in the overall ranked list.
Under 3 (b) For all topics and types of action, the prioritisation will be done first on the basis of the score for Impact, and then on that for Excellence.
4. Indicative time for evaluation and grant agreements:
Information on the outcome of evaluation (single-stage call): maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
6. Additional provisions:
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
As an exception from General Annex D, the funding rate for eligible costs in grants awarded under this topic will be differentiated: 100% of the eligible costs for beneficiaries and linked third parties that are non-profit legal entities; and 50% of the eligible costs for beneficiaries and linked third parties that are for profit legal entities.
8. Additional documents:
1. Introduction WP 2018-20
5. Introduction to Leadership in enabling and industrial technologies (LEITs) WP 2018-20
5ii. Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology WP 2018-20
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
No submission system is open for this topic.
H2020 Online Manual is your guide on the procedures from proposal submission to managing your grant.
Participant Portal FAQ – Submission of proposals.
National Contact Points (NCP) - contact your NCP for further assistance in your national language(s).
Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.
Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.
IT Helpdesk - contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.
European IPR Helpdesk assists you on intellectual property issues
CEN and CENELEC, the European Standards Organisations, advise you how to tackle standardisation in your project proposal. Contact CEN-CENELEC Research Helpdesk at firstname.lastname@example.org
Partner Search Services help you find a partner organisation for your proposal.