TOPIC : High-performance materials for optimizing carbon dioxide capture
|Publication date:||14 October 2015|
|Types of action:||IA Innovation action|
|DeadlineModel: Opening date:||two-stage 11 May 2016||Deadline: 2nd stage Deadline:||
27 October 2016 17:00:00
04 May 2017 17:00:00
|Time Zone : (Brussels time)|
11 January 2017 10:28
Switzerland as associated country
From 1 January 2017 Switzerland is associated to the whole Horizon 2020 programme instead of the previous partial association.
This applies to all the grant agreements signed on 1 January 2017 and afterwards.
For more information please see the relevant Note on the Participant Portal.
Topic DescriptionSpecific Challenge:
Carbon capture and storage (CCS) is a key element in the EU low-carbon policy. Presently, the roll-out has been hampered by costs and techno-economic uncertainties of the CCS, where CO2 capture is a major part. While there is a need to demonstrate currently state-of-the-art capture technologies in real market conditions, promising new material solutions have been under development for the next generation CCS technologies that are expected to reach the markets beyond 2020. These solutions could dramatically improve the efficiency of CO2 capture but the materials manufacturing processes should be further developed towards higher yields while conserving functionality at a lower cost.Scope:
Proposals should capitalise on promising material solutions for the next generation CO2 capture technologies (such as pre-combustion or post-combustion capture, oxygen combustion or other novel technologies or concepts). Recent work on such materials and capture techniques, based on, inter alia, nanostructured hybrid materials, membranes, solid and liquid-based adsorbents has made progress to the extent that their cost and performance competitiveness with respect to the state-of-the-art technologies (at least at demonstration level) should now be tested. The proposed solutions need to prove their added value in terms of sustainability and performance or their ability to address unique applications, and their viability in terms of manufacturability, yield, stability, long working-life and easy regeneration. Finally, the high efficiency concepts should be assessed for technical and economic viability and developed to readiness for pilot manufacturing to integrate the high-performance materials in existing demonstration projects.
This topic calls for proposals with focus on the manufacturability high performance materials for CO2 capture. A partially complementary topic is published in the “Secure, clean and efficient energy” part of this Work Programme (LCE 24-2016: International Cooperation with South Korea on new generation high-efficiency capture processes), calling for proposals on the development of high potential novel technologies or processes for post- and/or precombustion CO2 capture.
The implementation of this topic is intended to start at TRL 5 and target TRL 6.
The Commission considers that proposals requesting a contribution from the EU between EUR 6 and 8 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.Expected Impact:
The performance levels of the proposed materials solution(s) should be in line with those specified in relevant parts of the SET-Plan Integrated Roadmap and its Annexes, available at https://setis.ec.europa.eu/set-plan-process/integrated-roadmap-and-action-plan
- Improved security of supply by reducing the need for extra fuel to produce goods and power, increased use of indigenous resources;
- Increased competitiveness of CCS, in particular by reducing the cost of CO2 capture and the sustainability of the final products;
- integrate the high-performance materials in existing and next generation demonstrators;
- A strengthened European materials industry in a highly competitive market.
Proposals should include a business case and exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.Cross-cutting Priorities:
Topic conditions and documents
Please read carefully all provisions below before the preparation of your application.
- LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, , Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
- ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
3.1 Evaluation criteria and procedure, scoring and threshold:
The criteria, scoring and threshold are described in General Annex H of the work programme.
The following exceptions apply:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
The procedure for setting a priority order for proposals with the same score is given in General Annex H of the work programme. The following exceptions apply:
Under 3 (a)
Proposals are first ranked in separate lists according to the topics against which they were submitted (‘topic ranked lists’). When comparing ex aequo proposals from different topics, proposals having a higher position in their respective 'topic ranked list' will be considered to have a higher priority in the overall ranked list.
Under 3 (b)
For all topics and types of action, the prioritisation will be done first on the basis of the score for Impact, and then on that for Excellence.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
- INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT
Information on the outcome of two-stage evaluation:
For stage 1: maximum 3 months from the deadline for submission.
For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
- PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
for the type of action under this topic
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
- ADDITIONAL PROVISIONS
Horizon 2020 budget flexibility
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
- OPEN ACCESS
Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
- Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs.
- Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
- ADDITIONAL DOCUMENTS
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)
H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
No submission system is open for this topic.
National Contact Points (NCP) - contact your NCP for further assistance.
Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.
Partner Search Services help you find a partner organisation for your proposal.
Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.
H2020 Online Manual your online guide on the procedures from proposal submission to managing your grant.
Participant Portal FAQ – Submission of proposals.
IT Helpdesk- contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.
European IPR Helpdesk assists you on intellectual property issues