TOPIC : Innovative manufacturing of opto-electrical parts (RIA)
|Publication date:||27 October 2017|
|Focus area:||Digitising and transforming European industry and services (DT)|
|Types of action:||RIA Research and Innovation action|
|DeadlineModel: Opening date:||single-stage 31 October 2017||Deadline:||22 February 2018 17:00:00|
|Time Zone : (Brussels time)|
Topic DescriptionSpecific Challenge:
Optoelectronics and opto-electrical components involve the interactions of photons and electrons. They are used in parts such as lasers, photodiodes, image sensors, optical amplifiers, modulators, solar cells, embedded optics and light-emitting diodes.
Previous research led to rapid developments and new applications in optoelectronics and photonics. However, new processes need to be introduced into production systems. When going into the scale-up phase, many processes need to be adjusted to fit the production of complex, often free-form components. The adjustments include both component specific changes as well as standard process steps. Due to the need to produce large varieties of parts in small batches, process adjustments have to be both rapid and accurate.
The equipment for testing, failure analysis and control equipment needs to follow a fast pace of technical advancement, and cover a range of sensors, such as electrical, optical, magnetic and thermal sensors.Scope:
Proposals need to present a variety of new processes applicable to the production of opto-electrical components, for instance material handling, material strain engineering, patterning, material deposition, assembly, joining and bonding. Furthermore, quality needs to be ensured by reliable sensors throughout the production line. The processes need to include a level of sustainability that allows the final products to be recycled and reintroduced into the value chain. Proposals need to cover all of the following areas:
- New, flexible, and innovative process chains to handle complex designs that include opto-electrical functionalities;
- Improved sensor equipment for quality control in the different processing steps as well as the final functionality of the component;
- Methodologies for improving quality through high-precision automation using the sensor data, including non-destructive in-process evaluation of material and functional component properties;
- Re-use and requalification of key components and precious materials within the process chain from products at their end of life.
Proposals are expected to include a variety of use-case demonstrations of typical opto-electrical components, in which the robustness of the processing, work piece handling, sensing and the automation approach can be demonstrated.
Activities should start at TRL 4 and achieve TRL 6 at the end of the project.
The Commission considers that proposals requesting a contribution from the EU between EUR 6 and 8 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.Expected Impact:
- 15% yield improvement because of the introduction of new sensor equipment, related metrology and automatic non-destructive control;
- 15% time reduction for reconfiguration of key process tools in a production line due to change of type of component;
- A tangible part (> 10%) of the production cost of the parts should originate from recycled products and materials.
Relevant indicators and metrics, with baseline values, should be clearly stated in the proposal.Cross-cutting Priorities:
Topic conditions and documents
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
- Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.
- Submission and evaluation processes are described in the Online Manual.
The following exceptions apply:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
Under 3 (a) Proposals are first ranked in separate lists according to the topics against which they were submitted (‘topic ranked lists’). When comparing ex aequo proposals from different topics, proposals having a higher position in their respective 'topic ranked list' will be considered to have a higher priority in the overall ranked list.
Under 3 (b) For all topics and types of action, the prioritisation will be done first on the basis of the score for Impact, and then on that for Excellence.
4. Indicative time for evaluation and grant agreements:
Information on the outcome of evaluation (single-stage call): maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
Research and Innovation Action:
6. Additional provisions:
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
8. Additional documents:
1. Introduction WP 2018-20
5. Introduction to Leadership in enabling and industrial technologies (LEITs) WP 2018-20
5ii. Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology WP 2018-20
LEARs, Account Administrators or self-registrants can publish partner requests for open and forthcoming topics after logging into the Participant Portal.
To access the Electronic Submission Service of the topic, please select the type of action that is most relevant to your proposal from the list below and click on the 'Start Submission' button. You will then be asked to confirm your choice of the type of action and topic, as these cannot be changed in the submission system. Upon confirmation you will be linked to the correct entry point.
To access existing draft proposals for this topic, please login to the Participant Portal and select the My Proposals page of the My Area section.
|Type of Action||Research and Innovation action [RIA]|
|Topic||Innovative manufacturing of opto-electrical parts (RIA) - DT-FOF-03-2018|
|Guidance on proposal submission:||H2020 online manual|
H2020 Online Manual is your guide on the procedures from proposal submission to managing your grant.
Participant Portal FAQ – Submission of proposals.
National Contact Points (NCP) - contact your NCP for further assistance in your national language(s).
Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.
Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.
IT Helpdesk - contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.
European IPR Helpdesk assists you on intellectual property issues
CEN and CENELEC, the European Standards Organisations, advise you how to tackle standardisation in your project proposal. Contact CEN-CENELEC Research Helpdesk at firstname.lastname@example.org
Partner Search Services help you find a partner organisation for your proposal.