Research & Innovation - Participant Portal

Search

TOPIC : Valorisation of cellulose into new added value products

Topic identifier: BBI.VC2.F2
Publication date: 19 May 2015

Types of action: BBI-IA-FLAG Bio-based Industries Innovation action - Flagship
DeadlineModel:
Opening date:
single-stage
19 May 2015
Deadline: 15 September 2015 17:00:00

Time Zone : (Brussels time)
  Horizon 2020
Topic Description
Specific Challenge:

Cellulose is a well-known and widely exploited material. Besides its traditional uses, recent technological developments are opening up the opportunity for the use of cellulose in new and higher added value applications. This does not only enhance the competitiveness of the concerned industrial sectors but also significantly improves their environmental performance. While demonstration activities are being pursued to this end, the challenge lies in demonstrating at industrial scale first-of-a-kind cost-effective biorefinery concepts leading to the production of economically competitive cellulose-based products for bulk materials and volume applications.

Scope:

Demonstration of the techno-economic viability of biorefinery concepts leading to new cellulose-based products with tailored functionalities into either of the following applications:

i) Microfibrillar cellulose (MFC) based additives providing enhanced properties such as control of rheology, barrier and strength properties for stabilizers of emulsions and dispersions, biodegradable viscosifiers, barrier and strength enhancers, industrial thickeners in glues, paint, pastes and slurries and many more new applications. Proposals should realise an industrial scale process to produce MFC in suitable quantities, for at least 1000 ton/y of MFC-based products with an optimised efficiency in terms of performance, throughput and energy requirements so as to allow a suitable price for a significant industrial production;

ii) Lightweight structural composites based on (bio-based and/or conventional) polymers reinforced with cellulose pulp fibres. Proposals should address the technological challenge represented by the different polarities and viscosities between the cellulose and the matrix. Proposals should realise an industrial scale process of at least 25000 ton/year of composite materials, which can be converted with established processes used in volume applications, especially injection moulding. Application of the developed composites should be demonstrated up to the end products in markets such as structural elements for the automotive and building industry, cases for electronics products or household appliances.

Proposals should pursue all possible means of industrial symbiosis and integration of actors along the whole value chain and, wherever possible, make use of existing facilities. Proposals should address the industrial integration of the developed concepts into a cascading use of forest biomass. Proposals should include testing of the products at relevant scale in potential applications, and prove that the bio-based alternatives match functional and price requirements from the industry. Proposals should prove the economical access to sufficient raw material to set up the new value chain, and elaborate on the actions taken to ensure the functioning/organisation of the supply chain. Proposal will assess market demand of the targeted products and will consider market-pull related activities (e.g. standardisation, consumers’ perception) aimed at facilitating their market uptake. A Life Cycle Analysis should be included in order to demonstrate the environmental and socio-economic performance of the developed products. Safety and quality of end products must be verified in order to meet commercial requirements. The leading role of relevant industrial partners is considered essential to achieve the full impact.

It is considered that proposals with a total eligible budget of up to EUR 35 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals with another budget.

Expected Impact:
  • Opening up significant potential for job creation in rural areas. Creating green jobs and facilitating the development of entrepreneurial activities throughout the entire value chain, with advantages for the primary sector (i.e. forest), the secondary sector (e.g. logistics, bioproduct transformation industry) and the tertiary sector;
  • Proposals dealing with microfibrillar cellulose will demonstrate MFC-based products with validated potential for exploitation in at least 10 applications in 5 market segments (food and/or industrial applications). MFC-based demonstrated products will match or outperform properties of competing conventional products (e.g. synthetic polymers like acrylics, gums, hydrocolloids, thickeners and high molecular weight polymer stabilizers), and show a CO2 footprint 25% lower than competing technologies.
  • Proposals dealing with structural composites will demonstrate products that replace pure fossil based materials and compete with pure polymer solutions or mineral filled or short-fibre-glass reinforced composites in terms of mechanical properties, while exhibiting a significantly lower weight, reaching at least 25% weight reduction and a 100 times reduced tool wear compared to existing materials. Composite materials will be converted into at least 20 applications, thus increasing the competitiveness of leading European industries such as the automotive or chemical industry, along the value chain.
Cross-cutting Priorities:

Cross-cutting Key-Enabling Technologies (KETs)

Topic conditions and documents

Please read carefully all provisions below before the preparation of your application.

1. List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work   Programme.

 

2. Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.

 

3. Evaluation

3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the exceptions described in part 3.5.7 of the BBI JU Annual Work Plan 2015.

3.2 Guide to the submission and evaluation process and the BBI JU Calls 2015 - Guide for applicants.

 

4. Proposal page limits and layout: Please refer to Part B of the standard proposal template.

 

5. Indicative timetable for evaluation and grant agreement:
Information on the evaluation outcome: maximum 5 months after the proposal submission deadline.
Signature of grant agreements: maximum 8 months after the proposal submission deadline.

 

6. Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:

BBI Innovation Action Flagship (BBI-IA-FLAG)

Specific provisions and funding rates: described in part 3.5.5 of the BBI JU Annual Work Plan 2015
Standard proposal template
Standard evaluation form
BBI JU Model Grant Agreement
H2020 Annotated Grant Agreement

 

7. Additional provisions:

Technology readiness levels (TRL): described in Part G of the General Annexes to the EC Work Programme.

 

8. Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.

 

9. JTIs additional documents

BBI JU Work Plan 2015
BBI JU Scientific Innovation and Research Agenda (SIRA)
Horizon 2020 Rules for participation
BBI JU Derogation to H2020 Rules for Participation
BBI JU Regulation of establishment

 

 

Submission Service

No submission system is open for this topic.

Get support

Participant Portal FAQ – Submission of proposals

National Contact Points (NCP)

Enterprise Europe Network – national contact points' advice to businesses with focus on SMEs. The support includes guidance on the EU research funding.

Research Enquiry Service – ask questions about any aspect of European research and EU R&I programmes

IT Helpdesk – contact the IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.

Ethics – for compliance with ethical issues, see the Participant Portal and Science and Society Portal

European IPR Helpdesk assists you on intellectual property issues

The European Charter for Researchers and the Code of Conduct for their recruitment

CEN and CENELEC, the European Standards Organisations, advise you how to tackle standardisation in your project proposal. Contact CEN-CENELEC Research Helpdesk at research@cencenelec.eu.

Partner Search Services help you find a partner organisation for your proposal

H2020 Online Manual your online guide on the procedures from proposal submission to managing your grant