Wachstum
Unternehmen und Industrie
Low voltage (LVD)
Low voltage (LVD)
Directive 2006/95/EC
Directive 2014/35/EU
Short name: | Low voltage (LVD) |
Base: | Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (recast). Applicable from 20 April 2016. |
Modification: | [-] |
Directives repealed (applicable until 20 April 2016): | Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to Electrical Equipment designed for use within certain voltage limits |
Guide for application: | |
Commission contact point: | Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs |
For information about the content and availability of European standards, please contact the European Standardisation Organisations. | |
Publication of references of harmonised standards on electrical equipment designed for use within certain voltage limits in the Official Journal under:
Directive 2006/95/EC:
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits - OJ C 173 of 13/05/2016 
(This list replaces all the previous lists published in the Official Journal.)
Directive 2014/35/EU - view the list under the section 'Publications in the Official Journal' below.
Publications in the Official Journal: |
Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (recast) - OJ C 249 of 08/07/2016
(This list replaces all the previous lists published in the Official Journal.)- Stay up to date with the references of harmonised standards for this Directive, published in the Official Journal by subscribing to the RSS feed
Summary list of titles and references of harmonised standards under Directive 2014/35/EU for Low Voltage
The summary list hereunder is a compilation of the references of harmonised standards which have been generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the publication of the references of harmonised standards in the Official Journal of the European Union.
Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal gives legal effect.(Publication of titles and references of harmonised standards under Union harmonisation legislation)
ESO (1)
Reference and title of the standard
(and reference document)First publication OJ
Reference of superseded standard
Date of cessation of presumption of conformity of superseded standard
Note 1CEN
EN ISO 11252:2013
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
CEN
EN 13637:2015
Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
Cenelec
HD 308 S2:2001
Identification of cores in cables and flexible cords
HD 308 S1:1976
Note 2.1Cenelec
HD 361 S3:1999
System for cable designation
HD 361 S3:1999/A1:2006
01/06/2009
HD 361 S3:1999/AC:1999
Cenelec
HD 368 S1:1978
Direct acting recording electrical measuring instruments and their accessories
IEC 60258:1968 + A1:1976Cenelec
HD 516 S2:1997
Guide to use of low voltage harmonized cables
HD 516 S2:1997/A2:2008
01/09/2010
HD 516 S2:1997/A1:2003
01/02/2005
Cenelec
HD 549 S1:1989
Conference systems - Electrical and audio requirements
IEC 60914:1988Cenelec
HD 597 S1:1992
Coupling capacitors and capacitor dividers
IEC 60358:1990HD 597 S1:1992/AC:1992
Cenelec
HD 603 S1:1994
Distribution cables of rated voltage 0,6/1 kV
HD 603 S1:1994/A2:2003
HD 603 S1:1994/A3:2007
HD 603 S1:1994/A1:1997
Cenelec
HD 604 S1:1994
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
HD 604 S1:1994/A2:2002
HD 604 S1:1994/A3:2005
HD 604 S1:1994/A1:1997
Cenelec
HD 605 S2:2008
Electric cables - Additional test methods
HD 605 S1:1994
+ A1:1996
+ A2:2001
+ A3:2002
+ A4:2004
Note 2.101/03/2009
HD 605 S2:2008/AC:2010
Cenelec
HD 626 S1:1996
Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV
HD 626 S1:1996/A1:1997
HD 626 S1:1996/A2:2002
Cenelec
HD 627 S1:1996
Multicore and multipair cables for installation above and below ground
HD 627 S1:1996/A1:2000
HD 627 S1:1996/A2:2005
Cenelec
HD 639 S1:2002
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61540:1997 (Modified) + A1:1998 (Modified)HD 639 S1:2002/A1:2003
HD 639 S1:2002/AC:2003
HD 639 S1:2002/A2:2010
Cenelec
EN 41003:2008
Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system
EN 41003:1998
Note 2.1Cenelec
EN 50065-4-2:2001
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements
EN 50065-4-2:2001/A2:2005
EN 50065-4-2:2001/A1:2003
Cenelec
EN 50065-4-7:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements
EN 50065-4-7:2005/AC:2006
Cenelec
EN 50085-1:2005
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
EN 50085-1:1997
Note 2.1EN 50085-1:2005/A1:2013
20/05/2016
Cenelec
EN 50085-2-1:2006
Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
EN 50085-2-1:2006/A1:2011
Cenelec
EN 50085-2-2:2008
Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
Cenelec
EN 50085-2-3:2010
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets
EN 50085-2-3:1999
Note 2.1Cenelec
EN 50085-2-4:2009
Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts
Cenelec
EN 50106:2008
Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1
EN 50106:1997
+ A1:1998
+ A2:2001
Note 2.1Cenelec
EN 50117-1:2002
Coaxial cables - Part 1: Generic specification
EN 50117-1:2002/A2:2013
17/06/2016
EN 50117-1:2002/A1:2006
Cenelec
EN 50117-2-1:2005
Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-1:2005/A1:2008
EN 50117-2-1:2005/A2:2013
01/07/2016
Cenelec
EN 50117-2-2:2004
Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-2:2004/A2:2013
01/07/2016
EN 50117-2-2:2004/A1:2008
Cenelec
EN 50117-2-3:2004
Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-3:2004/A2:2013
01/07/2016
EN 50117-2-3:2004/A1:2008
Cenelec
EN 50117-2-4:2004
Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-2-4:2004/A1:2008
EN 50117-2-4:2004/A2:2013
01/07/2016
Cenelec
EN 50117-2-5:2004
Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-2-5:2004/AC:2012
EN 50117-2-5:2004/A2:2013
01/07/2016
EN 50117-2-5:2004/A1:2008
Cenelec
EN 50117-3-1:2002
Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems
Cenelec
EN 50117-4-1:2008
Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-4-1:2008/A1:2013
17/06/2016
Cenelec
EN 50117-4-2:2015
Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks
Cenelec
EN 50156-1:2004
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
Cenelec
EN 50156-1:2015
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN 50156-1:2004
Note 2.1Cenelec
EN 50156-2:2015
Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems
Cenelec
EN 50178:1997
Electronic equipment for use in power installations
Cenelec
EN 50214:2006
Flat polyvinyl chloride sheathed flexible cables
HD 359 S2:1990
EN 50214:1997
Note 2.101/10/2008
EN 50214:2006/AC:2007
Cenelec
EN 50250:2002
Conversion adaptors for industrial use
EN 50250:1998
Note 2.101/07/2005
EN 50250:2002/AC:2007
EN 50250:2002/A1:2015
19/01/2018
Cenelec
EN 50262:1998
Cable glands for electrical installations
EN 50262:1998/A1:2001
01/04/2003
EN 50262:1998/A2:2004
01/10/2007
EN 50262:1998/AC:1998
Cenelec
EN 50267-1:1998
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus
HD 602 S1:1992
Note 2.101/03/2000
Cenelec
EN 50267-2-1:1998
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas
Cenelec
EN 50267-2-2:1998
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
Cenelec
EN 50267-2-3:1998
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
HD 602 S1:1992
Note 2.101/03/2000
Cenelec
EN 50274:2002
Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
EN 50274:2002/AC:2009
Cenelec
EN 50288-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
Cenelec
EN 50288-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
EN 50288-1:2003
Note 2.1Cenelec
EN 50288-2-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-2-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
EN 50288-2-1:2003
Note 2.1Cenelec
EN 50288-2-2:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
Cenelec
EN 50288-2-2:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
EN 50288-2-2:2003
Note 2.1Cenelec
EN 50288-3-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-3-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
EN 50288-3-1:2003
Note 2.1Cenelec
EN 50288-3-2:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
Cenelec
EN 50288-3-2:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
EN 50288-3-2:2003
Note 2.1Cenelec
EN 50288-4-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-4-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
EN 50288-4-1:2003
Note 2.1Cenelec
EN 50288-4-2:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
Cenelec
EN 50288-4-2:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
EN 50288-4-2:2003
Note 2.1Cenelec
EN 50288-5-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-5-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
EN 50288-5-1:2003
Note 2.1Cenelec
EN 50288-5-2:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
Cenelec
EN 50288-5-2:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
EN 50288-5-2:2003
Note 2.1Cenelec
EN 50288-6-1:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-6-1:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
EN 50288-6-1:2003
Note 2.1Cenelec
EN 50288-6-2:2003
Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
Cenelec
EN 50288-6-2:2013
Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
EN 50288-6-2:2003
Note 2.1Cenelec
EN 50288-7:2005
Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables
Cenelec
EN 50288-8:2012
Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz
Cenelec
EN 50288-9-1:2012
Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-9-2:2015
Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
Cenelec
EN 50288-10-1:2012
Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables
Cenelec
EN 50288-10-2:2015
Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
Cenelec
EN 50288-11-1:2012
Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables
Cenelec
EN 50288-11-2:2015
Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
Cenelec
EN 50289-1-3:2001
Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength
Cenelec
EN 50289-1-4:2001
Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance
Cenelec
EN 50290-2-1:2005
Communication cables - Part 2-1: Common design rules and construction
Cenelec
EN 50290-2-20:2001
Communication cables - Part 2-20: Common design rules and construction - General
Cenelec
EN 50290-2-21:2001
Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds
EN 50290-2-21:2001/AC:2003
EN 50290-2-21:2001/A1:2007
EN 50290-2-21:2001/A1:2007/AC:2016
Cenelec
EN 50290-2-22:2001
Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds
EN 50290-2-22:2001/A1:2007
Cenelec
EN 50290-2-23:2001
Communication cables - Part 2-23: Common design rules and construction - PE insulation
Cenelec
EN 50290-2-23:2013
Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
EN 50290-2-23:2001
Note 2.116/09/2016
Cenelec
EN 50290-2-24:2002
Communication cables - Part 2-24: Common design rules and construction - PE sheathing
EN 50290-2-24:2002/A1:2008
Cenelec
EN 50290-2-25:2002
Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
Cenelec
EN 50290-2-25:2013
Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
EN 50290-2-25:2002
Note 2.116/09/2016
Cenelec
EN 50290-2-26:2002
Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds
EN 50290-2-26:2002/A1:2007
Cenelec
EN 50290-2-27:2002
Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds
EN 50290-2-27:2002/A1:2007
EN 50290-2-27:2002/A1:2007/AC:2010
Cenelec
EN 50290-2-28:2002
Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables
Cenelec
EN 50290-2-29:2002
Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE insulation compounds
Cenelec
EN 50290-2-30:2002
Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
Cenelec
EN 50290-4-1:2001
Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
Cenelec
EN 50290-4-1:2014
Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 50290-4-1:2001
Note 2.116/09/2016
Cenelec
EN 50290-4-2:2014
Communication cables - Part 4-2: General considerations for the use of cables - Guide to use
Cenelec
EN 50363-0:2011
Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction
EN 50363-0:2005
Note 2.114/03/2014
Cenelec
EN 50363-1:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds
Cenelec
EN 50363-2-1:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds
EN 50363-2-1:2005/A1:2011
14/03/2014
Cenelec
EN 50363-2-2:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds
Cenelec
EN 50363-3:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds
EN 50363-3:2005/A1:2011
14/03/2014
Cenelec
EN 50363-4-1:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds
Cenelec
EN 50363-4-2:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds
Cenelec
EN 50363-5:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds
EN 50363-5:2005/A1:2011
14/03/2014
Cenelec
EN 50363-6:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds
EN 50363-6:2005/A1:2011
14/03/2014
Cenelec
EN 50363-7:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds
Cenelec
EN 50363-8:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds
EN 50363-8:2005/A1:2011
14/03/2014
Cenelec
EN 50363-9-1:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC)
Cenelec
EN 50363-10-1:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)
Cenelec
EN 50363-10-2:2005
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane
Cenelec
EN 50364:2010
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
EN 50364:2001
Note 2.1Cenelec
EN 50369:2005
Liquid tight sheathing systems for cable management
Cenelec
EN 50395:2005
Electrical test methods for low voltage energy cables
HD 21.2 S3:1997# + A1:2002
HD 22.2 S3:1997# + A1:2002
Note 2.101/07/2008
EN 50395:2005/A1:2011
14/03/2014
Cenelec
EN 50396:2005
Non electrical test methods for low voltage energy cables
HD 21.2 S3:1997# + A1:2002
HD 22.2 S3:1997# + A1:2002
Note 2.101/07/2008
EN 50396:2005/A1:2011
14/03/2014
Cenelec
EN 50406-1:2004
End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables
Cenelec
EN 50406-2:2004
End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables
Cenelec
EN 50407-1:2004
Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables
Cenelec
EN 50407-3:2014
Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
Cenelec
EN 50428:2005
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
EN 50428:2005/A1:2007
EN 50428:2005/A2:2009
Cenelec
EN 50441-1:2012
Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1
EN 50441-1:2006
Note 2.1Cenelec
EN 50441-2:2012
Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1
EN 50441-2:2006
Note 2.1Cenelec
EN 50441-3:2006
Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3
Cenelec
EN 50441-4:2012
Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3
Cenelec
EN 50445:2008
Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
Cenelec
EN 50491-3:2009
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
EN 50090-2-2:1996
+ A1:2002
+ A2:2007
Note 2.1Cenelec
EN 50491-4-1:2012
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
Cenelec
EN 50491-6-1:2014
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning
Cenelec
EN 50497:2007
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
Cenelec
EN 50520:2009
Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
Cenelec
EN 50525-1:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
HD 21.1 S4:2002
HD 22.1 S4:2002
Note 2.1Cenelec
EN 50525-2-11:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
HD 21.5 S3:1994# + A1:1999# + A2:2001
HD 21.12 S1:1994# + A1:2001
Note 2.1Cenelec
EN 50525-2-12:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads
HD 21.10 S2:2001
Note 2.1Cenelec
EN 50525-2-21:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation
HD 22.4 S4:2004
HD 22.10 S2:2007
HD 22.11 S2:2007
HD 22.12 S2:2007
HD 22.16 S2:2007
Note 2.1EN 50525-2-21:2011/AC:2013
Cenelec
EN 50525-2-22:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation
HD 22.14 S3:2007
Note 2.1Cenelec
EN 50525-2-31:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation
HD 21.3 S3:1995# + A1:1999# + A2:2008
HD 21.7 S2:1996# + A1:1999
Note 2.1Cenelec
EN 50525-2-41:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation
HD 22.3 S4:2004
+ A1:2006
Note 2.1Cenelec
EN 50525-2-42:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation
HD 22.7 S2:1995
+ A1:1999
+ A2:2004
Note 2.1Cenelec
EN 50525-2-51:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
HD 21.13 S1:1995
+ A1:2001
Note 2.1Cenelec
EN 50525-2-71:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation
HD 21.5 S3:1994
+ A1:1999
+ A2:2001
Note 2.1Cenelec
EN 50525-2-72:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation
HD 21.11 S1:1995
+ A1:2001
Note 2.1Cenelec
EN 50525-2-81:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding
HD 22.6 S2:1995
+ A1:1999
+ A2:2004
Note 2.1Cenelec
EN 50525-2-82:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains
HD 22.8 S2:1994
+ A1:1999
+ A2:2004
Note 2.1Cenelec
EN 50525-2-83:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation
HD 22.15 S2:2007
Note 2.1Cenelec
EN 50525-3-11:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
HD 21.14 S1:2003
Note 2.1Cenelec
EN 50525-3-21:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
HD 22.13 S2:2007
Note 2.1EN 50525-3-21:2011/AC:2013
Cenelec
EN 50525-3-31:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
HD 21.15 S1:2006
Note 2.1Cenelec
EN 50525-3-41:2011
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
HD 22.9 S3:2007
Note 2.1Cenelec
EN 50539-11:2013
Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications
EN 50539-11:2013/A1:2014
25/07/2017
Cenelec
EN 50550:2011
Power frequency overvoltage protective device for household and similar applications (POP)
EN 50550:2011/AC:2012
EN 50550:2011/A1:2014
28/07/2017
Cenelec
EN 50556:2011
Road traffic signal systems
Cenelec
EN 50557:2011
Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
Cenelec
EN 50565-1:2014
Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance
HD 516 S2:1997
+ A1:2003
+ A2:2008
Note 2.117/02/2017
Cenelec
EN 50565-2:2014
Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types
HD 516 S2:1997
+ A1:2003
+ A2:2008
Note 2.117/02/2017
Cenelec
EN 50615:2015
Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops)
Cenelec
EN 50618:2014
Electric cables for photovoltaic systems
Cenelec
EN 60034-1:2010
Rotating electrical machines - Part 1: Rating and performance
IEC 60034-1:2010 (Modified)EN 60034-1:2004
Note 2.1EN 60034-1:2010/AC:2010
Cenelec
EN 60034-5:2001
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
IEC 60034-5:2000EN 60034-5:1986
Note 2.1EN 60034-5:2001/A1:2007
IEC 60034-5:2000/A1:2006Cenelec
EN 60034-6:1993
Rotating electrical machines - Part 6: Methods of cooling (IC Code)
IEC 60034-6:1991Cenelec
EN 60034-7:1993
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
IEC 60034-7:1992EN 60034-7:1993/A1:2001
IEC 60034-7:1992/A1:2000Cenelec
EN 60034-8:2007
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60034-8:2007EN 60034-8:2002
Note 2.1EN 60034-8:2007/A1:2014
IEC 60034-8:2007/A1:201424/04/2017
Cenelec
EN 60034-9:2005
Rotating electrical machines - Part 9: Noise limits
IEC 60034-9:2003 (Modified)EN 60034-9:1997
Note 2.1EN 60034-9:2005/A1:2007
IEC 60034-9:2003/A1:2007Cenelec
EN 60034-11:2004
Rotating electrical machines - Part 11: Thermal protection
IEC 60034-11:2004Cenelec
EN 60034-12:2002
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-12:2002EN 60034-12:1995
+ A11:1999
+ A2:1995
Note 2.1EN 60034-12:2002/A1:2007
IEC 60034-12:2002/A1:2007Cenelec
EN 60034-14:2004
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
IEC 60034-14:2003EN 60034-14:1996
Note 2.1EN 60034-14:2004/A1:2007
IEC 60034-14:2003/A1:2007Cenelec
EN 60051-1:1998
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
IEC 60051-1:1997EN 60051-1:1989
+ A1:1995
+ A2:1995
Note 2.1Cenelec
EN 60051-2:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
IEC 60051-2:1984Cenelec
EN 60051-3:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters
IEC 60051-3:1984EN 60051-3:1989/A1:1995
IEC 60051-3:1984/A1:1994Cenelec
EN 60051-4:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters
IEC 60051-4:1984Cenelec
EN 60051-5:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes
IEC 60051-5:1985Cenelec
EN 60051-6:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
IEC 60051-6:1984Cenelec
EN 60051-7:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments
IEC 60051-7:1984Cenelec
EN 60051-8:1989
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories
IEC 60051-8:1984Cenelec
EN 60051-9:1989
Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods
IEC 60051-9:1988EN 60051-9:1989/A1:1995
IEC 60051-9:1988/A1:1994EN 60051-9:1989/A2:1995
IEC 60051-9:1988/A2:1995Cenelec
EN 60065:2002
Audio, video and similar electronic apparatus - Safety requirements
IEC 60065:2001 (Modified)EN 60065:1998
Note 2.1EN 60065:2002/A11:2008
EN 60065:2002/A1:2006
IEC 60065:2001/A1:2005 (Modified)EN 60065:2002/A2:2010
IEC 60065:2001/A2:2010 (Modified)EN 60065:2002/AC:2007
EN 60065:2002/A12:2011
EN 60065:2002/AC:2006
Cenelec
EN 60065:2014
Audio, video and similar electronic apparatus - Safety requirements
IEC 60065:2014 (Modified)EN 60065:2002
+ A11:2008
+ A12:2011
+ A1:2006
+ A2:2010
Note 2.117/11/2017
EN 60065:2014/AC:2016
Cenelec
EN 60110-1:1998
Power capacitors for induction heating installations - Part 1: General
IEC 60110-1:1998HD 207 S1:1977
Note 2.1Cenelec
EN 60127-1:2006
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
IEC 60127-1:2006EN 60127-1:1991
+ A1:1999
+ A2:2003
Note 2.101/07/2009
EN 60127-1:2006/A1:2011
IEC 60127-1:2006/A1:201125/05/2014
EN 60127-1:2006/A2:2015
IEC 60127-1:2006/A2:201525/03/2018
Cenelec
EN 60127-2:2003
Miniature fuses - Part 2: Cartridge fuse-links
IEC 60127-2:2003EN 60127-2:1991
+ A1:1995
+ A2:2000
Note 2.101/03/2006
EN 60127-2:2003/A1:2003
IEC 60127-2:2003/A1:200301/10/2006
EN 60127-2:2003/A2:2010
IEC 60127-2:2003/A2:201001/07/2013
Cenelec
EN 60127-2:2014
Miniature fuses - Part 2: Cartridge fuse-links
IEC 60127-2:2014EN 60127-2:2003
+ A1:2003
+ A2:2010
Note 2.124/10/2017
Cenelec
EN 60127-3:1996
Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60127-3:1988 + A1:1991EN 60127-3:1991
Note 2.101/12/1996
EN 60127-3:1996/A2:2003
IEC 60127-3:1988/A2:200201/02/2006
EN 60127-3:1996/AC:1996
Cenelec
EN 60127-4:2005
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
IEC 60127-4:2005EN 60127-4:1996
+ A1:2002
+ A2:2003
Note 2.101/03/2008
EN 60127-4:2005/A2:2013
IEC 60127-4:2005/A2:201211/01/2016
EN 60127-4:2005/A1:2009
IEC 60127-4:2005/A1:200801/02/2012
Cenelec
EN 60127-6:1994
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
IEC 60127-6:1994EN 60127-6:1994/A2:2003
IEC 60127-6:1994/A2:200201/02/2006
EN 60127-6:1994/A1:1996
IEC 60127-6:1994/A1:199601/12/1996
Cenelec
EN 60127-6:2014
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
IEC 60127-6:2014EN 60127-6:1994
+ A1:1996
+ A2:2003
Note 2.108/10/2017
Cenelec
EN 60127-7:2013
Miniature fuses - Part 7: Miniature fuse-links for special applications
IEC 60127-7:2013Cenelec
EN 60127-7:2016
Miniature fuses - Part 7: Miniature fuse-links for special applications
IEC 60127-7:2015EN 60127-7:2013
Note 2.1Cenelec
EN 60143-2:1994
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60143-2:1994Cenelec
EN 60143-2:2013
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60143-2:2012EN 60143-2:1994
Note 2.115/01/2016
Cenelec
EN 60155:1995
Glow-starters for fluorescent lamps
IEC 60155:1993EN 60155:1995/A2:2007
IEC 60155:1993/A2:2006EN 60155:1995/A1:1995
IEC 60155:1993/A1:1995Cenelec
EN 60204-1:2006
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60204-1:2005 (Modified)EN 60204-1:1997
Note 2.1EN 60204-1:2006/AC:2010
EN 60204-1:2006/A1:2009
IEC 60204-1:2005/A1:2008Cenelec
EN 60204-32:2008
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 60204-32:2008EN 60204-32:1998
Note 2.1Cenelec
EN 60215:1989
Safety requirements for radio transmitting equipment
IEC 60215:1987EN 60215:1989/A2:1994
IEC 60215:1987/A2:1993EN 60215:1989/A1:1992
IEC 60215:1987/A1:1990Cenelec
EN 60228:2005
Conductors of insulated cables
IEC 60228:2004EN 60228:2005/AC:2005
Cenelec
EN 60238:2004
Edison screw lampholders
IEC 60238:2004EN 60238:1998
+ A1:1999
+ A2:2002
Note 2.1EN 60238:2004/A2:2011
IEC 60238:2004/A2:2011EN 60238:2004/AC:2005
EN 60238:2004/A1:2008
IEC 60238:2004/A1:2008Cenelec
EN 60252-1:2011
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
IEC 60252-1:2010EN 60252-1:2001
Note 2.1EN 60252-1:2011/A1:2013
IEC 60252-1:2010/A1:201303/10/2016
Cenelec
EN 60252-2:2011
AC motor capacitors - Part 2: Motor start capacitors
IEC 60252-2:2010EN 60252-2:2003
Note 2.1EN 60252-2:2011/A1:2013
IEC 60252-2:2010/A1:201303/10/2016
Cenelec
EN 60255-5:2001
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests
IEC 60255-5:2000Cenelec
EN 60255-27:2005
Measuring relays and protection equipment - Part 27: Product safety requirements
IEC 60255-27:2005Cenelec
EN 60255-27:2014
Measuring relays and protection equipment - Part 27: Product safety requirements
IEC 60255-27:2013EN 60255-5:2001
EN 60255-27:2005
Note 2.119/11/2016
Cenelec
EN 60269-1:2007
Low-voltage fuses - Part 1: General requirements
IEC 60269-1:2006EN 60269-1:1998# + A1:2005
EN 60269-2:1995# + A1:1998# + A2:2002
EN 60269-3:1995# + A1:2003
Note 2.1EN 60269-1:2007/A1:2009
IEC 60269-1:2006/A1:2009EN 60269-1:2007/A2:2014
IEC 60269-1:2006/A2:201404/08/2017
Cenelec
HD 60269-2:2010
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J
IEC 60269-2:2010 (Modified)HD 60269-2:2007
Note 2.1Cenelec
HD 60269-2:2013
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
IEC 60269-2:2013 (Modified)HD 60269-2:2010
Note 2.115/08/2016
Cenelec
HD 60269-3:2010
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F
IEC 60269-3:2010 (Modified)HD 60269-3:2007
Note 2.1HD 60269-3:2010/A1:2013
IEC 60269-3:2010/A1:2013Cenelec
EN 60269-4:2009
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
IEC 60269-4:2009EN 60269-4:2007
Note 2.1EN 60269-4:2009/A1:2012
IEC 60269-4:2009/A1:2012Cenelec
EN 60269-6:2011
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
IEC 60
IEC 60269-6:2010Cenelec
EN 60309-1:1999
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
IEC 60309-1:1999EN 60309-1:1997
Note 2.101/04/2002
EN 60309-1:1999/A2:2012
IEC 60309-1:1999/A2:201213/07/2015
EN 60309-1:1999/A1:2007
IEC 60309-1:1999/A1:2005 (Modified)01/11/2009
EN 60309-1:1999/A1:2007/AC:2014
Cenelec
EN 60309-2:1999
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
IEC 60309-2:1999EN 60309-2:1998
Note 2.101/05/2002
EN 60309-2:1999/A1:2007
IEC 60309-2:1999/A1:2005 (Modified)01/11/2009
EN 60309-2:1999/A2:2012
IEC 60309-2:1999/A2:201219/04/2015
Cenelec
EN 60309-4:2007
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
IEC 60309-4:2006 (Modified)EN 60309-4:2007/A1:2012
IEC 60309-4:2006/A1:201219/04/2015
Cenelec
EN 60320-1:2001
Appliance couplers for household and similar general purposes - Part 1: General requirements
IEC 60320-1:2001EN 60320-1:1996
+ A1:1996
+ A2:1998
Note 2.1EN 60320-1:2001/A1:2007
IEC 60320-1:2001/A1:2007Cenelec
EN 60320-2-1:2000
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
IEC 60320-2-1:2000EN 60320-2-1:1987
Note 2.1Cenelec
EN 60320-2-2:1998
Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
IEC 60320-2-2:1998EN 60320-2-2:1991
Note 2.1Cenelec
EN 60320-2-4:2006
Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement
IEC 60320-2-4:2005EN 60320-2-4:2006/A1:2009
IEC 60320-2-4:2005/A1:2009Cenelec
EN 60332-1-1:2004
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
IEC 60332-1-1:2004EN 50265-1:1998
Note 2.101/09/2007
EN 60332-1-1:2004/A1:2015
IEC 60332-1-1:2004/A1:201501/09/2018
Cenelec
EN 60332-1-2:2004
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
IEC 60332-1-2:2004EN 50265-2-1:1998
Note 2.101/09/2007
EN 60332-1-2:2004/A1:2015
IEC 60332-1-2:2004/A1:201501/09/2018
Cenelec
EN 60332-1-3:2004
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
IEC 60332-1-3:2004EN 60332-1-3:2004/A1:2015
IEC 60332-1-3:2004/A1:201501/09/2018
Cenelec
EN 60332-2-1:2004
Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
IEC 60332-2-1:2004EN 50265-1:1998
Note 2.101/09/2007
Cenelec
EN 60332-2-2:2004
Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
IEC 60332-2-2:2004EN 50265-2-2:1998
Note 2.101/09/2007
Cenelec
EN 60332-3-10:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC 60332-3-10:2000 + A1:2008EN 50266-1:2001
Note 2.101/08/2012
Cenelec
EN 60332-3-21:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
IEC 60332-3-21:2000 (Modified)EN 50266-2-1:2001
Note 2.101/08/2012
Cenelec
EN 60332-3-22:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
IEC 60332-3-22:2000 + A1:2008EN 50266-2-2:2001
Note 2.101/08/2012
Cenelec
EN 60332-3-23:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC 60332-3-23:2000 + A1:2008EN 50266-2-3:2001
Note 2.101/08/2012
Cenelec
EN 60332-3-24:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC 60332-3-24:2000 + A1:2008EN 50266-2-4:2001
Note 2.101/08/2012
Cenelec
EN 60332-3-25:2009
Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
IEC 60332-3-25:2000 + A1:2008EN 50266-2-5:2001
Note 2.101/08/2012
Cenelec
EN 60335-1:1994
Safety of household and similar electrical appliances - Part 1: General requirements
IEC 60335-1:1991 (Modified)EN 60335-1:1988
+ A2:1988
+ A51:1991
+ A52:1992
+ A53:1992
+ A54:1992
+ A55:1993
+ A56:1995
+ A5:1989
+ A6:1989
Note 2.1EN 60335-1:1994/A12:1996
EN 60335-1:1994/A15:2000
EN 60335-1:1994/AC:1995
EN 60335-1:1994/A1:1996
IEC 60335-1:1991/A1:1994 (Modified)EN 60335-1:1994/AC:1994
EN 60335-1:1994/A11:1995
EN 60335-1:1994/A16:2001
EN 60335-1:1994/A2:2000
IEC 60335-1:1991/A2:1999EN 60335-1:1994/AC:2009
EN 60335-1:1994/A13:1998
EN 60335-1:1994/A2:2000/AC:2004
EN 60335-1:1994/A14:1998
Cenelec
EN 60335-1:2002
Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-1:2001 (Modified)EN 60335-1:1994
+ A11:1995
+ A12:1996
+ A13:1998
+ A14:1998
+ A15:2000
+ A16:2001
+ A1:1996
+ A2:2000
Note 2.1EN 60335-1:2002/A12:2006
EN 60335-1:2002/A2:2006
IEC 60335-1:2001/A2:2006EN 60335-1:2002/A1:2004
IEC 60335-1:2001/A1:2004EN 60335-1:2002/A11:2004
EN 60335-1:2002/A13:2008
EN 60335-1:2002/AC:2009
EN 60335-1:2002/A15:2011
EN 60335-1:2002/A14:2010
EN 60335-1:2002/A1:2004/AC:2007
EN 60335-1:2002/A12:2006/AC:2007
EN 60335-1:2002/AC:2010
Cenelec
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-1:2010 (Modified)EN 60335-1:2002
+ A11:2004
+ A12:2006
+ A13:2008
+ A14:2010
+ A15:2011
+ A1:2004
+ A2:2006
Note 2.1EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
Cenelec
EN 60335-2-2:2010
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2:2009EN 60335-2-2:2003
+ A11:2010
+ A1:2004
+ A2:2006
Note 2.1EN 60335-2-2:2010/A1:2013
IEC 60335-2-2:2009/A1:2012EN 60335-2-2:2010/A11:2012
Cenelec
EN 60335-2-3:2002
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 6033
IEC 60335-2-3:2002EN 60335-2-3:1995
+ A1:1999
+ A2:2000
Note 2.1EN 60335-2-3:2002/A1:2005
IEC 60335-2-3:2002/A1:2004EN 60335-2-3:2002/A2:2008
IEC 60335-2-3:2002/A2:2008EN 60335-2-3:2002/A11:2010
EN 60335-2-3:2002/A11:2010/AC:2012
Cenelec
EN 60335-2-3:2016
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-3:2012 (Modified)EN 60335-2-3:2002
+ A11:2010
+ A1:2005
+ A2:2008
Note 2.105/10/2018
Cenelec
EN 60335-2-4:2010
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
IEC 60335-2-4:2008 (Modified)EN 60335-2-4:2002
+ A1:2004
+ A2:2006
Note 2.1EN 60335-2-4:2010/A1:2015
IEC 60335-2-4:2008/A1:2012 (Modified)12/08/2016
Cenelec
EN 60335-2-5:2003
Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 6033
IEC 60335-2-5:2002 (Modified)EN 60335-2-5:1995
+ A11:1997
+ A1:1999
+ A2:2000
Note 2.1EN 60335-2-5:2003/A11:2009
EN 60335-2-5:2003/A2:2008
IEC 60335-2-5:2002/A2:2008EN 60335-2-5:2003/A1:2005
IEC 60335-2-5:2002/A1:2005EN 60335-2-5:2003/A12:2012
Cenelec
EN 60335-2-5:2015
Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2012 (Modified)EN 60335-2-5:2003
+ A11:2009
+ A12:2012
+ A1:2005
+ A2:2008
Note 2.109/08/2016
Cenelec
EN 60335-2-6:2003
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6:2002 (Modified)EN 60335-2-6:1999
+ A1:2001
Note 2.1EN 60335-2-6:2003/A2:2008
IEC 60335-2-6:2002/A2:2008EN 60335-2-6:2003/A11:2010
EN 60335-2-6:2003/AC:2007
EN 60335-2-6:2003/A11:2010/AC:2012
EN 60335-2-6:2003/A1:2005
IEC 60335-2-6:2002/A1:2004EN 60335-2-6:2003/A12:2012
EN 60335-2-6:2003/A13:2013
Cenelec
EN 60335-2-6:2015
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6:2014 (Modified)EN 60335-2-6:2003
+ A11:2010
+ A12:2012
+ A13:2013
+ A1:2005
+ A2:2008
Note 2.109/02/2018
Cenelec
EN 60335-2-7:2010
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
IEC 60335-2-7:2008 (Modified)EN 60335-2-7:2003
+ A11:2010
+ A1:2004
+ A2:2006
Note 2.1EN 60335-2-7:2010/A1:2013
IEC 60335-2-7:2008/A1:2011 (Modified)EN 60335-2-7:2010/A11:2013
Cenelec
EN 60335-2-8:2003
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8:2002 (Modified)EN 60335-2-8:1995
+ A1:2001
Note 2.1EN 60335-2-8:2003/A2:2008
IEC 60335-2-8:2002/A2:2008EN 60335-2-8:2003/A1:2005
IEC 60335-2-8:2002/A1:2005Cenelec
EN 60335-2-8:2015
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8:2012 (Modified)EN 60335-2-8:2003
+ A1:2005
+ A2:2008
Note 2.120/07/2018
EN 60335-2-8:2015/A1:2016
IEC 60335-2-8:2012/A1:201528/12/2018
Cenelec
EN 60335-2-10:2003
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-10:2002EN 60335-2-10:1995
Note 2.1EN 60335-2-10:2003/A1:2008
IEC 60335-2-10:2002/A1:2008Cenelec
EN 60335-2-11:2010
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
IEC 60335-2-11:2008 (Modified)EN 60335-2-11:2003
+ A11:2008
+ A1:2004
+ A2:2006
Note 2.1EN 60335-2-11:2010/A11:2012
EN 60335-2-11:2010/A1:2015
IEC 60335-2-11:2008/A1:2012 (Modified)24/02/2017
Cenelec
EN 60335-2-12:2003
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-12:2002EN 60335-2-12:1995
Note 2.1EN 60335-2-12:2003/A1:2008
IEC 60335-2-12:2002/A1:2008Cenelec
EN 60335-2-13:2010
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
IEC 60335-2-13:2009EN 60335-2-13:2003
+ A1:2004
+ A2:2008
Note 2.1EN 60335-2-13:2010/A11:2012
Cenelec
EN 60335-2-15:2002
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-15:2002EN 60335-2-15:1996
+ A1:1999
+ A2:2000
Note 2.1EN 60335-2-15:2002/A11:2012/AC:2013
EN 60335-2-15:2002/AC:2005
EN 60335-2-15:2002/A11:2012
EN 60335-2-15:2002/AC:2006
EN 60335-2-15:2002/A1:2005
IEC 60335-2-15:2002/A1:2005EN 60335-2-15:2002/A2:2008
IEC 60335-2-15:2002/A2:2008Cenelec
EN 60335-2-16:2003
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002 (Modified)EN 60335-2-16:1996
Note 2.1EN 60335-2-16:2003/A1:2008
IEC 60335-2-16:2002/A1:2008EN 60335-2-16:2003/A2:2012
IEC 60335-2-16:2002/A2:2011Cenelec
EN 60335-2-17:2013
Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012EN 60335-2-17:2002
+ A1:2006
+ A2:2009
Note 2.1Cenelec
EN 60335-2-21:2003
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-21:2002 (Modified)EN 60335-2-21:1999
+ A11:2002
+ A12:2002
+ A1:2000
Note 2.1EN 60335-2-21:2003/A2:2008
IEC 60335-2-21:2002/A2:2008EN 60335-2-21:2003/AC:2007
EN 60335-2-21:2003/A1:2005
IEC 60335-2-21:2002/A1:2004EN 60335-2-21:2003/AC:2010
Cenelec
EN 60335-2-23:2003
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-23:2003EN 60335-2-23:1996
+ A1:2001
Note 2.1EN 60335-2-23:2003/A11:2010/AC:2012
EN 60335-2-23:2003/A2:2015
IEC 60335-2-23:2003/A2:2012 (Modified)29/09/2017
EN 60335-2-23:2003/A1:2008
IEC 60335-2-23:2003/A1:2008EN 60335-2-23:2003/A11:2010
Cenelec
EN 60335-2-25:2012
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
IEC 60335-2-25:2010 (Modified)EN 60335-2-25:2002
+ A11:2010
+ A1:2005
+ A2:2006
Note 2.1EN 60335-2-25:2012/A1:2015
IEC 60335-2-25:2010/A1:201416/09/2017
EN 60335-2-25:2012/A2:2016
IEC 60335-2-25:2010/A2:201528/12/2018
Cenelec
EN 60335-2-26:2003
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
IEC 60335-2-26:2002EN 60335-2-26:1996
Note 2.1EN 60335-2-26:2003/A1:2008
IEC 60335-2-26:2002/A1:2008Cenelec
EN 60335-2-27:2013
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
IEC 60335-2-27:2009 (Modified)EN 60335-2-27:2010
Note 2.1Cenelec
EN 60335-2-28:2003
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
IEC 60335-2-28:2002 (Modified)EN 60335-2-28:1996
Note 2.1EN 60335-2-28:2003/A1:2008
IEC 60335-2-28:2002/A1:2008Cenelec
EN 60335-2-29:2004
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
IEC 60335-2-29:2002 + A1:2004EN 60335-2-29:1996
+ A11:1997
Note 2.1EN 60335-2-29:2004/A2:2010
IEC 60335-2-29:2002/A2:2009Cenelec
EN 60335-2-30:2009
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-30:2009EN 60335-2-30:2003
+ A1:2004
+ A2:2007
Note 2.1EN 60335-2-30:2009/AC:2010
EN 60335-2-30:2009/A11:2012
EN 60335-2-30:2009/AC:2014
Cenelec
EN 60335-2-31:2003
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31:2002EN 60335-2-31:1997
+ A1:1999
Note 2.1EN 60335-2-31:2003/A1:2006
IEC 60335-2-31:2002/A1:2006EN 60335-2-31:2003/AC:2005
EN 60335-2-31:2003/A2:2009
IEC 60335-2-31:2002/A2:2008Cenelec
EN 60335-2-31:2014
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31:2012 (Modified)EN 60335-2-31:2003
+ A1:2006
+ A2:2009
Note 2.128/04/2017
Cenelec
EN 60335-2-32:2003
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
IEC 60335-2-32:2002EN 60335-2-32:1995
+ A1:2000
Note 2.1EN 60335-2-32:2003/A2:2015
IEC 60335-2-32:2002/A2:2013 (Modified)11/11/2017
EN 60335-2-32:2003/A1:2008
IEC 60335-2-32:2002/A1:2008Cenelec
EN 60335-2-34:2013
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
IEC 60335-2-34:2012EN 60335-2-34:2002
+ A11:2004
+ A1:2005
+ A2:2009
Note 2.127/06/2018
Cenelec
EN 60335-2-35:2002
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2002EN 60335-2-35:1998
+ A1:2000
Note 2.1EN 60335-2-35:2002/A2:2011
IEC 60335-2-35:2002/A2:2009 (Modified)EN 60335-2-35:2002/AC:2005
EN 60335-2-35:2002/A1:2007
IEC 60335-2-35:2002/A1:2006Cenelec
EN 60335-2-35:2016
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2012 (Modified)EN 60335-2-35:2002
+ A11:201
+ A1:2007
+ A2:2011
Note 2.112/10/2018
Cenelec
EN 60335-2-36:2002
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
IEC 60335-2-36:2002EN 60335-2-36:2000
Note 2.1EN 60335-2-36:2002/A11:2012
EN 60335-2-36:2002/AC:2007
EN 60335-2-36:2002/A1:2004
IEC 60335-2-36:2002/A1:2004EN 60335-2-36:2002/A2:2008
IEC 60335-2-36:2002/A2:2008Cenelec
EN 60335-2-37:2002
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
IEC 60335-2-37:2002EN 60335-2-37:2000
Note 2.1EN 60335-2-37:2002/AC:2007
EN 60335-2-37:2002/A1:2008
IEC 60335-2-37:2002/A1:2008EN 60335-2-37:2002/A11:2012
Cenelec
EN 60335-2-38:2003
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
IEC 60335-2-38:2002EN 60335-2-38:2000
Note 2.1EN 60335-2-38:2003/A1:2008
IEC 60335-2-38:2002/A1:2008EN 60335-2-38:2003/AC:2007
Cenelec
EN 60335-2-39:2003
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
IEC 60335-2-39:2002EN 60335-2-39:2000
Note 2.1EN 60335-2-39:2003/AC:2007
EN 60335-2-39:2003/A1:2004
IEC 60335-2-39:2002/A1:2004EN 60335-2-39:2003/A2:2008
IEC 60335-2-39:2002/A2:2008Cenelec
EN 60335-2-40:2003
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
IEC 60335-2-40:2002 (Modified)EN 60335-2-40:1997
+ A11:2004
+ A1:2000
Note 2.1EN 60335-2-40:2003/A13:2012
EN 60335-2-40:2003/AC:2010
EN 60335-2-40:2003/A1:2006
IEC 60335-2-40:2002/A1:2005 (Modified)EN 60335-2-40:2003/A11:2004
EN 60335-2-40:2003/A12:2005
EN 60335-2-40:2003/AC:2006
EN 60335-2-40:2003/A2:2009
IEC 60335-2-40:2002/A2:2005 (Modified)EN 60335-2-40:2003/A13:2012/AC:2013
Cenelec
EN 60335-2-41:2003
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
IEC 60335-2-41:2002EN 60335-2-41:1996
+ A1:2001
Note 2.1EN 60335-2-41:2003/A2:2010
IEC 60335-2-41:2002/A2:2009EN 60335-2-41:2003/A1:2004
IEC 60335-2-41:2002/A1:2004Cenelec
EN 60335-2-42:2003
Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60335-2-42:2002EN 60335-2-42:2000
Note 2.1EN 60335-2-42:2003/A1:2008
IEC 60335-2-42:2002/A1:2008EN 60335-2-42:2003/AC:2007
EN 60335-2-42:2003/A11:2012
Cenelec
EN 60335-2-43:2003
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
IEC 60335-2-43:2002EN 60335-2-43:1997
Note 2.1EN 60335-2-43:2003/A2:2008
IEC 60335-2-43:2002/A2:2008EN 60335-2-43:2003/A1:2006
IEC 60335-2-43:2002/A1:2005Cenelec
EN 60335-2-44:2002
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
IEC 60335-2-44:2002EN 60335-2-44:1997
Note 2.1EN 60335-2-44:2002/A1:2008
IEC 60335-2-44:2002/A1:2008EN 60335-2-44:2002/A2:2012
IEC 60335-2-44:2002/A2:2011Cenelec
EN 60335-2-45:2002
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002EN 60335-2-45:1996
Note 2.1EN 60335-2-45:2002/A2:2012
IEC 60335-2-45:2002/A2:2011EN 60335-2-45:2002/A1:2008
IEC 60335-2-45:2002/A1:2008Cenelec
EN 60335-2-47:2003
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
IEC 60335-2-47:2002EN 60335-2-47:2000
Note 2.1EN 60335-2-47:2003/AC:2007
EN 60335-2-47:2003/A11:2012
EN 60335-2-47:2003/A1:2008
IEC 60335-2-47:2002/A1:2008Cenelec
EN 60335-2-48:2003
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
IEC 60335-2-48:2002EN 60335-2-48:2000
Note 2.1EN 60335-2-48:2003/A11:2012
EN 60335-2-48:2003/AC:2007
EN 60335-2-48:2003/A1:2008
IEC 60335-2-48:2002/A1:2008Cenelec
EN 60335-2-49:2003
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
IEC 60335-2-49:2002EN 60335-2-49:2000
Note 2.1EN 60335-2-49:2003/A1:2008
IEC 60335-2-49:2002/A1:2008EN 60335-2-49:2003/AC:2007
EN 60335-2-49:2003/A11:2012
Cenelec
EN 60335-2-50:2003
Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
IEC 60335-2-50:2002EN 60335-2-50:2000
Note 2.1EN 60335-2-50:2003/AC:2007
EN 60335-2-50:2003/A1:2008
IEC 60335-2-50:2002/A1:2007Cenelec
EN 60335-2-51:2003
Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
IEC 60335-2-51:2002EN 60335-2-51:1997
Note 2.1EN 60335-2-51:2003/A2:2012
IEC 60335-2-51:2002/A2:2011EN 60335-2-51:2003/A1:2008
IEC 60335-2-51:2002/A1:2008Cenelec
EN 60335-2-52:2003
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-52:2002EN 60335-2-52:1996
Note 2.1EN 60335-2-52:2003/A1:2008
IEC 60335-2-52:2002/A1:2008EN 60335-2-52:2003/A11:2010/AC:2012
EN 60335-2-52:2003/A11:2010
Cenelec
EN 60335-2-53:2011
Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-53:2011EN 60335-2-53:2003
+ A1:2007
Note 2.1Cenelec
EN 60335-2-54:2008
Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
IEC 60335-2-54:2008EN 60335-2-54:2003
+ A11:2006
+ A1:2004
+ A2:2007
Note 2.1EN 60335-2-54:2008/A11:2012
30/04/2016
EN 60335-2-54:2008/A1:2015
IEC 60335-2-54:2008/A1:201509/09/2018
EN 60335-2-54:2008/A11:2012/AC:2015
Cenelec
EN 60335-2-55:2003
Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
IEC 60335-2-55:2002EN 60335-2-55:1997
Note 2.1EN 60335-2-55:2003/A1:2008
IEC 60335-2-55:2002/A1:2008Cenelec
EN 60335-2-56:2003
Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002EN 60335-2-56:1997
Note 2.1EN 60335-2-56:2003/A1:2008
IEC 60335-2-56:2002/A1:2008EN 60335-2-56:2003/A2:2014
IEC 60335-2-56:2002/A2:201416/09/2017
Cenelec
EN 60335-2-58:2005
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
IEC 60335-2-58:2002 (Modified)EN 60335-2-58:1997
+ A1:1999
Note 2.101/12/2007
Cenelec
EN 60335-2-59:2003
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
IEC 60335-2-59:2002 (Modified)EN 60335-2-59:1997
+ A11:2000
+ A1:2001
Note 2.1EN 60335-2-59:2003/A2:2009
IEC 60335-2-59:2002/A2:2009EN 60335-2-59:2003/A1:2006
IEC 60335-2-59:2002/A1:2006Cenelec
EN 60335-2-60:2003
Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
IEC 60335-2-60:2002EN 60335-2-60:1997
Note 2.1EN 60335-2-60:2003/A11:2010
EN 60335-2-60:2003/A2:2008
IEC 60335-2-60:2002/A2:2008EN 60335-2-60:2003/A1:2005
IEC 60335-2-60:2002/A1:2004EN 60335-2-60:2003/A12:2010
Cenelec
EN 60335-2-61:2003
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters
IEC 60335-2-61:2002EN 60335-2-61:1996
+ A1:2000
Note 2.1EN 60335-2-61:2003/A1:2005
IEC 60335-2-61:2002/A1:2005EN 60335-2-61:2003/A2:2008
IEC 60335-2-61:2002/A2:2008Cenelec
EN 60335-2-62:2003
Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks
IEC 60335-2-62:2002EN 60335-2-62:1997
+ A1:1999
+ A2:2000
Note 2.1EN 60335-2-62:2003/AC:2007
EN 60335-2-62:2003/A1:2008
IEC 60335-2-62:2002/A1:2008Cenelec
EN 60335-2-65:2003
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002EN 60335-2-65:1995
+ A1:2001
Note 2.1EN 60335-2-65:2003/A1:2008
IEC 60335-2-65:2002/A1:2008EN 60335-2-65:2003/A11:2012
Cenelec
EN 60335-2-66:2003
Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002EN 60335-2-66:1995
+ A1:2001
Note 2.1EN 60335-2-66:2003/A1:2008
IEC 60335-2-66:2002/A1:2008EN 60335-2-66:2003/A2:2012
IEC 60335-2-66:2002/A2:2011Cenelec
EN 60335-2-70:2002
Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines
IEC 60335-2-70:2002EN 60335-2-70:1996
Note 2.1Cenelec
EN 60335-2-71:2003
Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals
IEC 60335-2-71:2002 (Modified)EN 60335-2-71:1995
+ A1:1998
+ A2:1999
Note 2.1EN 60335-2-71:2003/A1:2007
IEC 60335-2-71:2002/A1:2007Cenelec
EN 60335-2-73:2003
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2002 (Modified)EN 60335-2-73:1996
Note 2.1EN 60335-2-73:2003/A2:2009
IEC 60335-2-73:2002/A2:2009EN 60335-2-73:2003/A1:2006
IEC 60335-2-73:2002/A1:2006Cenelec
EN 60335-2-74:2003
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters
IEC 60335-2-74:2002EN 60335-2-74:1996
Note 2.1EN 60335-2-74:2003/A1:2006
IEC 60335-2-74:2002/A1:2006EN 60335-2-74:2003/A2:2009
IEC 60335-2-74:2002/A2:2009Cenelec
EN 60335-2-75:2004
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2002 (Modified)EN 60335-2-63:1993
EN 60335-2-75:2002
Note 2.1EN 60335-2-75:2004/A2:2008
IEC 60335-2-75:2002/A2:2008EN 60335-2-75:2004/A11:2006
EN 60335-2-75:2004/A1:2005
IEC 60335-2-75:2002/A1:2004EN 60335-2-75:2004/A12:2010
Cenelec
EN 60335-2-78:2003
Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues
IEC 60335-2-78:2002EN 60335-2-78:1997
Note 2.1EN 60335-2-78:2003/A1:2008
IEC 60335-2-78:2002/A1:2008Cenelec
EN 60335-2-80:2003
+6Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
IEC 60335-2-80:2002EN 60335-2-80:1997
Note 2.1EN 60335-2-80:2003/A2:2009
IEC 60335-2-80:2002/A2:2008EN 60335-2-80:2003/A1:2004
IEC 60335-2-80:2002/A1:2004Cenelec
EN 60335-2-81:2003
Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats
IEC 60335-2-81:2002EN 60335-2-81:1997
Note 2.1EN 60335-2-81:2003/A2:2012
IEC 60335-2-81:2002/A2:2011EN 60335-2-81:2003/A1:2007
IEC 60335-2-81:2002/A1:2007Cenelec
EN 60335-2-82:2003
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
IEC 60335-2-82:2002EN 60335-2-82:2000
Note 2.1EN 60335-2-82:2003/A1:2008
IEC 60335-2-82:2002/A1:2008Cenelec
EN 60335-2-83:2002
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
IEC 60335-2-83:2001EN 60335-2-83:2002/A1:2008
IEC 60335-2-83:2001/A1:2008Cenelec
EN 60335-2-84:2003
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets
IEC 60335-2-84:2002EN 60335-2-84:1998
Note 2.1EN 60335-2-84:2003/A1:2008
IEC 60335-2-84:2002/A1:2008Cenelec
EN 60335-2-85:2003
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-85:2002EN 60335-2-85:1998
+ A1:2000
Note 2.1EN 60335-2-85:2003/A1:2008
IEC 60335-2-85:2002/A1:2008Cenelec
EN 60335-2-86:2003
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines
IEC 60335-2-86:2002 (Modified)EN 60335-2-86:2000
Note 2.1EN 60335-2-86:2003/A11:2016
16/11/2018
EN 60335-2-86:2003/A1:2005
IEC 60335-2-86:2002/A1:2005EN 60335-2-86:2003/A2:2016
IEC 60335-2-86:2002/A2:201219/02/2019
Cenelec
EN 60335-2-87:2002
Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment
IEC 60335-2-87:2002EN 60335-2-87:1999
Note 2.1EN 60335-2-87:2002/A1:2007
IEC 60335-2-87:2002/A1:2007Cenelec
EN 60335-2-88:2002
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
IEC 60335-2-88:2002EN 60335-2-88:1997
Note 2.1Cenelec
EN 60335-2-90:2006
Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens
IEC 60335-2-90:2006EN 60335-2-90:2002
+ A1:2003
Note 2.1EN 60335-2-90:2006/A1:2010
IEC 60335-2-90:2006/A1:2010Cenelec
EN 60335-2-96:2002
Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
IEC 60335-2-96:2002EN 60335-2-96:2002/A2:2009
IEC 60335-2-96:2002/A2:2008EN 60335-2-96:2002/A1:2004
IEC 60335-2-96:2002/A1:2003Cenelec
EN 60335-2-97:2006
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified)EN 60335-2-97:2000
+ A11:2006
Note 2.1EN 60335-2-97:2006/A12:2015
29/09/2017
EN 60335-2-97:2006/A11:2008
EN 60335-2-97:2006/A2:2010
IEC 60335-2-97:2002/A2:2008 (Modified)Cenelec
EN 60335-2-98:2003
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-98:2002EN 60335-2-98:1997
+ A1:2000
Note 2.1EN 60335-2-98:2003/A2:2008
IEC 60335-2-98:2002/A2:2008EN 60335-2-98:2003/A1:2005
IEC 60335-2-98:2002/A1:2004Cenelec
EN 60335-2-99:2003
Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
IEC 60335-2-99:2003Cenelec
EN 60335-2-101:2002
Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-101:2002EN 60335-2-101:2002/A1:2008
IEC 60335-2-101:2002/A1:2008EN 60335-2-101:2002/A2:2014
IEC 60335-2-101:2002/A2:201416/09/2017
Cenelec
EN 60335-2-102:2006
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60335-2-102:2004 (Modified)EN 50165:1997
+ A1:2001
Note 2.1EN 60335-2-102:2006/A1:2010
IEC 60335-2-102:2004/A1:2008 (Modified)Cenelec
EN 60335-2-102:2016
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60335-2-102:2004 (Modified)
IEC 60335-2-102:2004/A1:2008 (Modified) + A1:2008 (Modified)
IEC 60335-2-102:2004/A2:2012 (Modified)EN 60335-2-102:2006
+ A1:2010
+ A2:2012
Note 2.122/01/2019
Cenelec
EN 60335-2-105:2005
Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets
IEC 60335-2-105:2004EN 60335-2-105:2005/A1:2008
IEC 60335-2-105:2004/A1:2008EN 60335-2-105:2005/A11:2010
Cenelec
EN 60335-2-106:2007
Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
IEC 60335-2-106:2007Cenelec
EN 60335-2-108:2008
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
IEC 60335-2-108:2008 (Modified)Cenelec
EN 60335-2-109:2010
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 60335-2-109:2010Cenelec
EN 60358-1:2012
Coupling capacitors and capacitor dividers - Part 1: General rules
IEC 60358-1:2012HD 597 S1:1992
Note 2.1EN 60358-1:2012/AC:2013
Cenelec
EN 60360:1998
Standard method of measurement of lamp cap temperature rise
IEC 60360:1998EN 60360:1989
+ A1:1994
+ A2:1997
Note 2.1Cenelec
EN 60399:2004
Barrel thread for lampholders with shade holder ring
IEC 60399:2004EN 60399:1993
+ A1:1997
+ A2:1999
Note 2.1EN 60399:2004/A1:2008
IEC 60399:2004/A1:2008Cenelec
EN 60400:2008
Lampholders for tubular fluorescent lamps and starterholders
IEC 60400:2008EN 60400:2000
+ A1:2002
+ A2:2004
Note 2.1EN 60400:2008/A1:2011
IEC 60400:2008/A1:2011EN 60400:2008/A2:2014
IEC 60400:2008/A2:201404/08/2017
Cenelec
EN 60423:2007
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60423:2007Cenelec
EN 60432-1:2000
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999 (Modified)EN 60432-1:1994
+ A1:1997
+ A2:1997
Note 2.1EN 60432-1:2000/A1:2005
IEC 60432-1:1999/A1:2005EN 60432-1:2000/A2:2012
IEC 60432-1:1999/A2:2011Cenelec
EN 60432-2:2000
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999 (Modified)EN 60432-2:1994
+ A1:1996
+ A2:1997
Note 2.1EN 60432-2:2000/A1:2005
IEC 60432-2:1999/A1:2005 (Modified)EN 60432-2:2000/A2:2012
IEC 60432-2:1999/A2:2012Cenelec
EN 60432-3:2013
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
IEC 60432-3:2012EN 60432-3:2003
+ A1:2005
+ A2:2008
Note 2.1Cenelec
EN 60477:1997
Laboratory d.c. resistors
IEC 60477:1974EN 60477:1997/A1:1997
IEC 60477:1974/A1:199701/09/1998
Cenelec
EN 60477-2:1997
Laboratory resistors - Part 2: Laboratory a.c. resistors
IEC 60477-2:1979EN 60477-2:1997/A1:1997
IEC 60477-2:1979/A1:199701/09/1998
Cenelec
EN 60519-1:2011
Safety in electroheating installations - Part 1: General requirements
IEC 60
IEC 60519-1:2010EN 60519-1:2003
Note 2.1Cenelec
EN 60519-1:2015
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
IEC 60519-1:2015EN 60519-1:2011
Note 2.114/04/2018
Cenelec
EN 60519-2:2006
Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment
IEC 60519-2:2006EN 60519-2:1993
Note 2.1Cenelec
EN 60519-3:2005
Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
IEC 60519-3:2005EN 60519-3:1995
Note 2.1Cenelec
EN 60519-4:2006
Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations
IEC 60519-4:2006EN 60519-4:1997
+ A1:2000
Note 2.1Cenelec
EN 60519-4:2013
Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations
IEC 60519-4:2013EN 60519-4:2006
Note 2.124/07/2016
Cenelec
EN 60519-6:2011
Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment
IEC 60519-6:2011EN 60519-6:2002
Note 2.1Cenelec
EN 60519-7:2008
Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
IEC 60519-7:2008Cenelec
EN 60519-8:2005
Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces
IEC 60519-8:2005Cenelec
EN 60519-9:2005
Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
IEC 60519-9:2005EN 60519-9:1995
Note 2.1Cenelec
EN 60519-10:2005
Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
IEC 60519-10:2005Cenelec
EN 60519-10:2013
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
IEC 60519-10:2013EN 60519-10:2005
Note 2.1Cenelec
EN 60519-12:2013
Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations
IEC 60519-12:2013Cenelec
EN 60519-21:2009
Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment
IEC 60519-21:2008EN 60519-21:1998
Note 2.1Cenelec
EN 60523:1993
Direct-current potentiometers
IEC 60523:1975 + A1:1979EN 60523:1993/A2:1997
IEC 60523:1975/A2:199701/07/1998
Cenelec
EN 60524:1993
Direct-current resistive volt ratio boxes
IEC 60524:1975 + A1:1981EN 60524:1993/A2:1997
IEC 60524:1975/A2:199701/07/1998
Cenelec
EN 60529:1991
Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989EN 60529:1991/A2:2013
IEC 60529:1989/A2:201303/10/2016
EN 60529:1991/A1:2000
IEC 60529:1989/A1:1999EN 60529:1991/AC:1993
Cenelec
EN 60564:1993
D.C. bridges for measuring resistance
IEC 60564:1977 + A1:1981EN 60564:1993/A2:1997
IEC 60564:1977/A2:199701/07/1998
Cenelec
EN 60570:2003
Electrical supply track systems for luminaires
IEC 60570:2003 (Modified)EN 60570:1996# + A11:1998# + A12:2000# + A1:1998# + A2:2000
EN 60570-2-1:1994# + A1:1996
Note 2.1Cenelec
EN 60598-1:2008
Luminaires - Part 1: General requirements and tests
IEC 60
IEC 60598-1:2008 (Modified)EN 60598-1:2004
+ A1:2006
Note 2.1EN 60598-1:2008/A11:2009
Cenelec
EN 60598-1:2015
Luminaires - Part 1: General requirements and tests
IEC 60598-1:2014 (Modified)EN 60598-1:2008
+ A11:2009
Note 2.120/10/2017
EN 60598-1:2015/AC:2015
EN 60598-1:2015/AC:2016
Cenelec
EN 60598-2-1:1989
Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires
IEC 60598-2-1:1979 + A1:1987Cenelec
EN 60598-2-2:2012
Luminaires - Part 2-2: Particular requirements - Recessed luminaires
IEC 60598-2-2:2011EN 60598-2-2:1996
+ A1:1997
Note 2.1Cenelec
EN 60598-2-3:2003
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
IEC 60598-2-3:2002EN 60598-2-3:1994
+ A1:1997
+ A2:2001
Note 2.1EN 60598-2-3:2003/A1:2011
IEC 60598-2-3:2002/A1:2011EN 60598-2-3:2003/AC:2005
Cenelec
EN 60598-2-4:1997
Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires
IEC 60598-2-4:1997EN 60598-2-4:1989
+ A3:1993
Note 2.1Cenelec
EN 60598-2-5:1998
Luminaires - Part 2-5: Particular requirements - Floodlights
IEC 60598-2-5:1998EN 60598-2-5:1989
+ A2:1994
Note 2.1EN 60598-2-5:1998/AC:1998
Cenelec
EN 60598-2-5:2015
Luminaires - Part 2-5: Particular requirements - Floodlights
IEC 60598-2-5:2015EN 60598-2-5:1998
Note 2.110/09/2018
Cenelec
EN 60598-2-7:1989
Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use
IEC 60598-2-7:1982 (Modified) + A1:1987 (Modified)EN 60598-2-7:1989/A2:1996/AC:1999
EN 60598-2-7:1989/A2:1996
IEC 60598-2-7:1982/A2:1994 (Modified)EN 60598-2-7:1989/A13:1997
Cenelec
EN 60598-2-8:1997
Luminaires - Part 2-8: Particular requirements - Handlamps
IEC 60598-2-8:1996 (Modified)EN 60598-2-8:1989
+ A2:1993
Note 2.1EN 60598-2-8:1997/A2:2008
IEC 60598-2-8:1996/A2:2007EN 60598-2-8:1997/A1:2000
IEC 60598-2-8:1996/A1:2000Cenelec
EN 60598-2-8:2013
Luminaires - Part 2-8: Particular requirements - Handlamps
IEC 60598-2-8:2013EN 60598-2-8:1997
+ A1:2000
+ A2:2008
Note 2.103/06/2016
Cenelec
EN 60598-2-9:1989
Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional)
IEC 60598-2-9:1987EN 60598-2-9:1989/A1:1994
IEC 60598-2-9:1987/A1:1993Cenelec
EN 60598-2-10:2003
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children
IEC 60598-2-10:2003EN 60598-2-10:2003/AC:2005
Cenelec
EN 60598-2-11:2005
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires
IEC 60598-2-11:2005EN 60598-2-11:2005/AC:2005
Cenelec
EN 60598-2-11:2013
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires
IEC 60598-2-11:2013EN 60598-2-11:2005
Note 2.120/06/2016
Cenelec
EN 60598-2-12:2006
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
IEC 60598
IEC 60598-2-12:2006EN 60598-2-12:2006/AC:2006
Cenelec
EN 60598-2-12:2013
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
IEC 60598-2-12:2013EN 60598-2-12:2006
Note 2.103/06/2016
Cenelec
EN 60598-2-13:2006
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC 60598-2-13:2006EN 60598-2-13:2006/A1:2012
IEC 60598-2-13:2006/A1:2011EN 60598-2-13:2006/AC:2006
Cenelec
EN 60598-2-14:2009
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
IEC 60598-2-14:2009Cenelec
EN 60598-2-17:1989
Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor)
IEC 60598-2-17:1984 + A1:1987EN 60598-2-17:1989/A2:1991
IEC 60598-2-17:1984/A2:1990Cenelec
EN 60598-2-19:1989
Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements)
IEC 60598-2-19:1981 (Modified) + A1:1987 (Modified)EN 60598-2-19:1989/AC:2005
EN 60598-2-19:1989/A2:1998
IEC 60598-2-19:1981/A2:1997Cenelec
EN 60598-2-20:2010
Luminaires - Part 2-20: Particular requirements - Lighting chains
IEC 60598-2-20:2010 (Modified)EN 60598-2-20:1997
+ A1:1998
+ A2:2004
Note 2.1EN 60598-2-20:2010/AC:2010
Cenelec
EN 60598-2-20:2015
Luminaires - Part 2-20: Particular requirements - Lighting chains
IEC 60598-2-20:2014EN 60598-2-20:2010
Note 2.130/12/2017
Cenelec
EN 60598-2-21:2015
Luminaires - Part 2-21: Particular requirements - Rope lights
IEC 60598-2-21:2014Cenelec
EN 60598-2-22:1998
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
IEC 60598-2-22:1997 (Modified)EN 60598-2-22:1990
Note 2.1EN 60598-2-22:1998/A2:2008
IEC 60598-2-22:1997/A2:2008EN 60598-2-22:1998/AC:2007
EN 60598-2-22:1998/A1:2003
IEC 60598-2-22:1997/A1:2002EN 60598-2-22:1998/AC:2005
EN 60598-2-22:1998/AC:1999
Cenelec
EN 60598-2-22:2014
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
IEC 60598-2-22:2014EN 60598-2-22:1998
+ A1:2003
+ A2:2008
Note 2.124/07/2017
EN 60598-2-22:2014/AC:2015
Cenelec
EN 60598-2-23:1996
Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps
IEC 60598-2-23:1996EN 60598-2-23:1996/AC:1997
EN 60598-2-23:1996/A1:2000
IEC 60598-2-23:1996/A1:2000Cenelec
EN 60598-2-24:1998
Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
IEC 60598-2-24:1997 (Modified)Cenelec
EN 60598-2-24:2013
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures
IEC 60598-2-24:2013EN 60598-2-24:1998
Note 2.124/07/2016
Cenelec
EN 60598-2-25:1994
Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
IEC 60598
IEC 60598-2-25:1994EN 60598-2-25:1994/A1:2004
IEC 60598-2-25:1994/A1:2004Cenelec
EN 60618:1997
Inductive voltage dividers
IEC 60618:1978 + A1:1981EN 60618:1997/A2:1997
IEC 60618:1978/A2:199701/09/1998
Cenelec
EN 60645-1:2001
Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers
IEC 60645-1:2001EN 60645-1:1994
Note 2.101/10/2004
Cenelec
EN 60645-1:2015
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry
IEC 60645-1:2012EN 60645-1:2001
EN 60645-4:1995
Note 2.105/11/2017
Cenelec
EN 60645-3:2007
Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
IEC 60645-3:2007EN 60645-3:1995
Note 2.101/06/2010
Cenelec
EN 60645-4:1995
Audiometers - Part 4: Equipment for extended high-frequency audiometry
IEC 60645-4:1994Cenelec
EN 60645-6:2010
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
IEC 60645-6:2009Cenelec
EN 60645-7:2010
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses
IEC 60645-7:2009Cenelec
EN 60664-1:2007
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60664-1:2007EN 60664-1:2003
Note 2.1Cenelec
EN 60664-3:2003
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 60664-3:2003HD 625.3 S1:1997
Note 2.1EN 60664-3:2003/A1:2010
IEC 60664-3:2003/A1:2010Cenelec
EN 60664-4:2006
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
IEC 60664-4:2005EN 60664-4:2006/AC:2006
Cenelec
EN 60669-1:1999
Switches for household and similar fixed-electrical installations - Part 1: General requirements
IEC 60669-1:1998 (Modified)EN 60669-1:1995
+ A2:1996
Note 2.1EN 60669-1:1999/A1:2002
IEC 60669-1:1998/A1:1999 (Modified)EN 60669-1:1999/A2:2008
IEC 60669-1:1998/A2:2006 (Modified)Cenelec
EN 60669-2-1:2004
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012EN 60669-2-1:2000
+ A2:2001
Note 2.1EN 60669-2-1:2004/AC:2007
EN 60669-2-1:2004/A1:2009
IEC 60669-2-1:2002/A1:2008 (Modified)EN 60669-2-1:2004/A12:2010
Cenelec
EN 60669-2-2:2006
Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
IEC 60669-2-2:2006EN 60669-2-2:1997
+ A1:1997
Note 2.1Cenelec
EN 60669-2-3:2006
Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS)
IEC 60669-2-3:2006EN 60669-2-3:1997
Note 2.1Cenelec
EN 60669-2-4:2005
Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches
IEC 60669-2-4:2004 (Modified)Cenelec
EN 60669-2-6:2012
Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires
IEC 60669-2-6:2012 (Modified)EN 50425:2008
Note 2.1Cenelec
EN 60670-1:2005
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
IEC 60670-1:2002 (Modified)EN 60670-1:2005/A1:2013
IEC 60670-1:2002/A1:2011 (Modified)31/12/2017
EN 60670-1:2005/AC:2007
EN 60670-1:2005/AC:2010
Cenelec
EN 60670-21:2007
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means
IEC 60670-21:2004 (Modified)Cenelec
EN 60670-22:2006
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
IEC 60670-22:2003 (Modified)Cenelec
EN 60670-23:2008
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
IEC 60670-23:2006 (Modified)Cenelec
EN 60670-24:2013
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
IEC 60670-24:2011 (Modified)Cenelec
EN 60688:2013
Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
IEC
IEC 60688:2012Cenelec
EN 60691:2003
Thermal-links - Requirements and application guide
IEC 60691:2002EN 60691:1995
+ A2:2000
Note 2.101/12/2005
EN 60691:2003/A1:2007
IEC 60691:2002/A1:200601/12/2009
EN 60691:2003/A2:2010
IEC 60691:2002/A2:201001/03/2013
Cenelec
EN 60695-2-10:2001
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60695-2-10:2000EN 60695-2-1/0:1996
Note 2.101/11/2003
Cenelec
EN 60695-2-10:2013
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60695-2-10:2013EN 60695-2-10:2001
Note 2.1Cenelec
EN 60695-2-11:2001
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
IEC 60695-2-11:2000EN 60695-2-1/1:1996
Note 2.101/11/2003
Cenelec
EN 60695-2-11:2014
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
IEC 60695-2-11:2014EN 60695-2-11:2001
Note 2.1Cenelec
EN 60695-10-2:2003
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
IEC 60695-10-2:2003Cenelec
EN 60695-10-2:2014
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 60695-10-2:2014EN 60695-10-2:2003
Note 2.1Cenelec
EN 60695-10-3:2002
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 60695-10-3:2002Cenelec
EN 60695-11-2:2003
Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-2:2003EN 60695-2-4/1:1993
+ A1:1996
Note 2.101/10/2006
Cenelec
EN 60695-11-2:2014
Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-2:2013EN 60695-11-2:2003
Note 2.1Cenelec
EN 60695-11-3:2012
Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
IEC 60695-11-3:2012Cenelec
EN 60695-11-4:2011
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
IEC 60695-11-4:2011Cenelec
EN 60695-11-5:2005
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-5:2004EN 60695-2-2:1994
+ A1:1995
Note 2.1Cenelec
EN 60695-11-10:1999
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60695-11-10:1999EN 60695-11-10:1999/A1:2003
IEC 60695-11-10:1999/A1:200301/09/2006
Cenelec
EN 60695-11-10:2013
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60695-11-10:2013EN 60695-11-10:1999
+ A1:2003
Note 2.1EN 60695-11-10:2013/AC:2014
Cenelec
EN 60695-11-20:1999
Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
IEC 60695-11-20:1999EN 60695-11-20:1999/A1:2003
IEC 60695-11-20:1999/A1:200301/09/2006
Cenelec
EN 60695-11-20:2015
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60695-11-20:2015EN 60695-11-20:1999
+ A1:2003
Note 2.1EN 60695-11-20:2015/AC:2016
Cenelec
EN 60702-1:2002
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
IEC 60702-1:2002HD 586.1 S1:1994
Note 2.1EN 60702-1:2002/A1:2015
IEC 60702-1:2002/A1:201519/02/2018
Cenelec
EN 60702-2:2002
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
IEC 60702-2:2002HD 586.2 S1:1994
Note 2.1EN 60702-2:2002/A1:2015
IEC 60702-2:2002/A1:201519/02/2018
Cenelec
EN 60715:2001
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
IEC 60715:1981 + A1:1995Cenelec
EN 60719:1993
Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
IEC 60719:1992Cenelec
EN 60728-11:2010
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC 60728-11:2010EN 60728-11:2005
Note 2.1Cenelec
EN 60730-1:2000
Automatic electrical controls for household and similar use - Part 1: General requirements
IEC 60730-1:1999 (Modified)EN 60730-1:1995
+ A11:1996
+ A12:1996
+ A13:1998
+ A14:1998
+ A15:1998
+ A16:1999
+ A17:2000
+ A18:2003
+ A1:1997
+ A2:1998
Note 2.104/05/1998
EN 60730-1:2000/A12:2003
01/06/2010
EN 60730-1:2000/A2:2008
IEC 60730-1:1999/A2:2007 (Modified)01/06/2011
EN 60730-1:2000/AC:2007
EN 60730-1:2000/A13:2004
01/09/2007
EN 60730-1:2000/A14:2005
01/06/2010
EN 60730-1:2000/A1:2004
IEC 60730-1:1999/A1:2003 (Modified)17/03/2005
Cenelec
EN 60730-1:2011
Automatic electrical controls for household and similar use - Part 1: General requirements
IEC 60730-1:2010 (Modified)EN 60730-1:2000
+ A11:2002
+ A12:2003
+ A13:2004
+ A14:2005
+ A15:2007
+ A1:2004
+ A2:2008
Note 2.1Cenelec
EN 60730-1:1995
Automatic electrical controls for household and similar use - Part 1: General requirements
IEC 60730-1:1993 (Modified)EN 60730-1:1991
+ A11:1991
+ A12:1993
+ A14:1995
+ A1:1991
Note 2.101/10/2013
EN 60730-1:1995/A11:1996
01/01/1998
EN 60730-1:1995/A14:1998
24/08/1998
EN 60730-1:1995/A12:1996
01/12/1996
EN 60730-1:1995/AC:1997
EN 60730-1:1995/A2:1998
IEC 60730-1:1993/A2:199701/12/1996
EN 60730-1:1995/A1:1997
IEC 60730-1:1993/A1:1994 (Modified)01/12/1996
EN 60730-1:1995/A15:1998
24/08/1998
EN 60730-1:1995/AC:2007
EN 60730-1:1995/A16:1999
01/10/2000
EN 60730-1:1995/A17:2000
01/10/2002
EN 60730-1:1995/A18:2003
01/06/2010
Cenelec
EN 60730-2-2:2002
Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors
IEC 60730-2-2:2001 (Modified)EN 60730-2-2:1991
+ A11:1995
+ A1:1997
+ A2:1997
Note 2.1EN 60730-2-2:2002/A1:2006
IEC 60730-2-2:2001/A1:2005 (Modified)EN 60730-2-2:2002/A11:2005
Cenelec
EN 60730-2-3:2007
Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
IEC 60730-2-3:2006 (Modified)EN 60730-2-3:1992
+ A11:2005
+ A1:1998
+ A2:2001
Note 2.1Cenelec
EN 60730-2-4:2007
Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
IEC 60730-2-4:2006 (Modified)EN 60730-2-4:1993
+ A1:1998
+ A2:2002
Note 2.1Cenelec
EN 60730-2-5:2002
Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-5:2000 (Modified)EN 60730-2-5:1995
+ A1:1996
+ A2:1998
Note 2.1EN 60730-2-5:2002/A11:2005
EN 60730-2-5:2002/A1:2004
IEC 60730-2-5:2000/A1:2004 (Modified)EN 60730-2-5:2002/A2:2010
IEC 60730-2-5:2000/A2:2008 (Modified)Cenelec
EN 60730-2-5:2015
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-5:2013 (Modified)EN 60730-2-5:2002
+ A11:2005
+ A1:2004
+ A2:2010
Note 2.117/11/2017
Cenelec
EN 60730-2-6:2008
Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2007 (Modified)EN 60730-2-6:1995
+ A1:1997
+ A2:1998
Note 2.1Cenelec
EN 60730-2-6:2016
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2015EN 60730-2-6:2008
Note 2.126/02/2019
Cenelec
EN 60730-2-7:2010
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches
IEC 60730-2-7:2008 (Modified)EN 60730-2-7:1991
+ A11:1994
+ A12:1993
+ A13:2003
+ A14:2003
+ A1:1997
Note 2.1EN 60730-2-7:2010/AC:2011
Cenelec
EN 60730-2-8:2002
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60730-2-8:2000 (Modified)EN 60730-2-8:1995
+ A1:1997
+ A2:1997
Note 2.1EN 60730-2-8:2002/A1:2003
IEC 60730-2-8:2000/A1:2002 (Modified)Cenelec
EN 60730-2-9:2010
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
IEC 60730-2-9:2008 (Modified)EN 60730-2-9:2002
+ A11:2003
+ A12:2004
+ A1:2003
+ A2:2005
Note 2.1Cenelec
EN 60730-2-10:2007
Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays
IEC 60730-2-10:2006EN 60730-2-10:1995
+ A1:1996
+ A2:2002
Note 2.1Cenelec
EN 60730-2-11:2008
Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators
IEC 60730-2-11:2006EN 60730-2-11:1993
+ A11:2005
+ A1:1997
+ A2:1998
Note 2.1Cenelec
EN 60730-2-12:2006
Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks
IEC 60730-2-12:2005 (Modified)EN 60730-2-12:1993
+ A11:2005
+ A1:1997
Note 2.1EN 60730-2-12:2006/A11:2008
Cenelec
EN 60730-2-13:2008
Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls
IEC 60730-2-13:2006 (Modified)EN 60730-2-13:1998
+ A11:2005
+ A1:1998
+ A2:2002
Note 2.1Cenelec
EN 60730-2-14:1997
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
IEC 60730-2-14:1995 (Modified)EN 60730-2-14:1997/A11:2005
EN 60730-2-14:1997/A1:2001
IEC 60730-2-14:1995/A1:2001EN 60730-2-14:1997/A2:2008
IEC 60730-2-14:1995/A2:2007 (Modified)Cenelec
EN 60730-2-15:2010
Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
IEC 60730-2-15:2008 (Modified)EN 60730-2-15:1995# + A11:2005# + A1:1998
EN 60730-2-16:1997# + A11:2005# + A1:1998# + A2:2001
EN 60730-2-18:1999# + A11:2005
Note 2.1Cenelec
EN 60730-2-19:2002
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
IEC 60730-2-19:1997 (Modified) + A1:2000 (Modified)EN 60730-2-19:2002/A11:2005
EN 60730-2-19:2002/A2:2008
IEC 60730-2-19:1997/A2:2007Cenelec
EN 60754-1:2014
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC 60754-1:2011EN 50267-1:1998
EN 50267-2-1:1998
EN 50267-2-2:1998
EN 50267-2-3:1998
Note 2.127/01/2017
Cenelec
EN 60754-2:2014
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60754-2:2011EN 50267-1:1998
EN 50267-2-1:1998
EN 50267-2-2:1998
EN 50267-2-3:1998
Note 2.127/01/2017
Cenelec
EN 60799:1998
Electrical accessories - Cord sets and interconnection cord sets
IEC 60799:1998EN 60799:1987
+ A1:1994
Note 2.1Cenelec
EN 60811-100:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
IEC 60811-100:2012EN 60811-1-1:1995# + A1:2001
EN 60811-1-2:1995# + A2:2000
EN 60811-1-3:1995# + A1:2001
EN 60811-1-4:1995# + A2:2001
EN 60811-2-1:1998# + A1:2001
EN 60811-3-1:1995# + A1:1996# + A2:2001
EN 60811-3-2:1995# + A2:2004
EN 60811-4-1:2004
EN 60811-4-2:2004
EN 60811-5-1:1999# + A1:2004
Note 2.116/04/2015
Cenelec
EN 60811-201:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC 60811-201:2012EN 60811-1-1:1995
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-202:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC 60811-202:2012EN 60811-1-1:1995
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-203:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
IEC 60811-203:2012EN 60811-1-1:1995
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-301:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds
IEC 60811-301:2012EN 60811-5-1:1999
+ A1:2004
Note 2.116/04/2015
Cenelec
EN 60811-302:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
IEC 60811-302:2012EN 60811-5-1:1999
+ A1:2004
Note 2.116/04/2015
Cenelec
EN 60811-401:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2012EN 60811-1-2:1995
+ A2:2000
Note 2.116/04/2015
Cenelec
EN 60811-402:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
IEC 60811-402:2012EN 60811-1-3:1995
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-403:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
IEC 60811-403:2012EN 60811-2-1:1998
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-404:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
IEC 60811-404:2012EN 60811-2-1:1998
+ A1:2001
Note 2.116/04/2015
Cenelec
EN 60811-405:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
IEC 60811-405:2012EN 60811-3-2:1995
+ A2:2004
Note 2.116/04/2015
Cenelec
EN 60811-406:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
IEC 60811-406:2012EN 60811-4-1:2004
Note 2.116/04/2015
Cenelec
EN 60811-407:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
IEC 60811-407:2012EN 60811-4-2:2004
Note 2.116/04/2015
Cenelec
EN 60811-408:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
IEC 60811-408:2012EN 60811-4-2:2004
Note 2.116/04/2015
Cenelec
EN 60811-409:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC 60811-409:2012EN 60811-3-2:1995
+ A2:2004
Note 2.116/04/2015
Cenelec
EN 60811-410:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
IEC 60811-410:2012EN 60811-4-2:2004
Note 2.116/04/2015
Cenelec
EN 60811-411:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
IEC 60811-411:2012EN 60811-5-1:1999
+ A1:2004
Note 2.116/04/2015
Cenelec
EN 60811-412:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-412:2012EN 60811-1-2:1995
+ A2:2000
Note 2.116/04/2015
Cenelec
EN 60811-501:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-501:2012EN 60811-1-1:1995
+ A1:2001
Note 2.117/04/2015
Cenelec
EN 60811-502:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
IEC 60811-502:2012EN 60811-1-3:1995
+ A1:2001
Note 2.117/04/2015
Cenelec
EN 60811-503:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
IEC 60811-503:2012EN 60811-1-3:1995
+ A1:2001
Note 2.117/04/2015
Cenelec
EN 60811-504:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
IEC 60811-504:2012EN 60811-1-4:1995
+ A2:2001
Note 2.117/04/2015
Cenelec
EN 60811-505:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
IEC 60811-505:2012EN 60811-1-4:1995
+ A2:2001
Note 2.117/04/2015
Cenelec
EN 60811-506:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
IEC 60811-506:2012EN 60811-1-4:1995
+ A2:2001
Note 2.117/04/2015
Cenelec
EN 60811-507:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
IEC 60811-507:2012EN 60811-2-1:1998
+ A1:2001
Note 2.117/04/2015
Cenelec
EN 60811-508:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC 60811-508:2012EN 60811-3-1:1995
+ A1:1996
+ A2:2001
Note 2.117/04/2015
Cenelec
EN 60811-509:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC 60811-509:2012EN 60811-3-1:1995
+ A1:1996
+ A2:2001
Note 2.117/04/2015
Cenelec
EN 60811-510:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
IEC 60811-510:2012EN 60811-4-2:2004
Note 2.117/04/2015
Cenelec
EN 60811-511:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
IEC 60811-511:2012EN 60811-4-1:2004
Note 2.117/04/2015
Cenelec
EN 60811-512:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
IEC 60811-512:2012EN 60811-4-2:2004
Note 2.117/04/2015
Cenelec
EN 60811-513:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
IEC 60811-513:2012EN 60811-4-2:2004
Note 2.117/04/2015
Cenelec
EN 60811-601:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
IEC 60811-601:2012EN 60811-5-1:1999
+ A1:2004
Note 2.117/04/2015
Cenelec
EN 60811-602:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
IEC 60811-602:2012EN 60811-5-1:1999
+ A1:2004
Note 2.117/04/2015
Cenelec
EN 60811-603:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
IEC 60811-603:2012EN 60811-5-1:1999
+ A1:2004
Note 2.117/04/2015
Cenelec
EN 60811-604:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
IEC 60811-604:2012EN 60811-5-1:1999
+ A1:2004
Note 2.117/04/2015
Cenelec
EN 60811-605:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 60811-605:2012EN 60811-4-1:2004
Note 2.117/04/2015
Cenelec
EN 60811-606:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
IEC 60811-606:2012EN 60811-1-3:1995
+ A1:2001
Note 2.117/04/2015
Cenelec
EN 60811-607:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
IEC 60811-607:2012EN 60811-4-1:2004
Note 2.117/04/2015
Cenelec
EN 60825-1:2007
Safety of laser products - Part 1: Equipment classification and requirements
IEC 60825-1:2007EN 60825-1:1994
+ A11:1996
+ A1:2002
+ A2:2001
Note 2.101/09/2010
Cenelec
EN 60825-1:2014
Safety of laser products - Part 1: Equipment classification and requirements
IEC 60825-1:2014EN 60825-1:2007
Note 2.1Cenelec
EN 60825-2:2004
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60825-2:2004EN 60825-2:2000
Note 2.1EN 60825-2:2004/A1:2007
IEC 60825-2:2004/A1:2006EN 60825-2:2004/A2:2010
IEC 60825-2:2004/A2:2010Cenelec
EN 60825-4:2006
Safety of laser products - Part 4: Laser guards
IEC 60825-4:2006EN 60825-4:1997
+ A1:2002
+ A2:2003
Note 2.1EN 60825-4:2006/A1:2008
IEC 60825-4:2006/A1:2008EN 60825-4:2006/A2:2011
IEC 60825-4:2006/A2:2011Cenelec
EN 60825-12:2004
Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60825-12:2004Cenelec
EN 60831-1:1996
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
IEC 60831-1:1996EN 60831-1:1993
Note 2.1EN 60831-1:1996/A1:2003
IEC 60831-1:1996/A1:2002Cenelec
EN 60831-1:2014
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
IEC 60831-1:2014EN 60831-1:1996
+ A1:2003
Note 2.118/03/2017
EN 60831-1:2014/AC:2014
Cenelec
EN 60831-2:1996
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test, self-healing test and destruction test
IEC 60831-2:1995EN 60831-2:1993
Note 2.1Cenelec
EN 60831-2:2014
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test
IEC 60831-2:2014EN 60831-2:1996
Note 2.119/03/2017
Cenelec
EN 60838-1:2004
Miscellaneous lampholders - Part 1: General requirements and tests
IEC 60838-1:2004EN 60838-1:1998
+ A1:1999
+ A2:2002
Note 2.1EN 60838-1:2004/A1:2008
IEC 60838-1:2004/A1:2008EN 60838-1:2004/A2:2011
IEC 60838-1:2004/A2:2011Cenelec
EN 60838-2-1:1996
Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14
IEC 60838-2-1:1994EN 60838-2-1:1996/A1:1998
IEC 60838-2-1:1994/A1:1998EN 60838-2-1:1996/A2:2004
2-1:1994/A2:2004Cenelec
EN 60838-2-2:2006
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-2:2006EN 60838-2-2:2006/A1:2012
IEC 60838-2-2:2006/A1:2012Cenelec
EN 60898-1:2003
Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
IEC 60898-1:2002 (Modified)EN 60898:1991
+ A11:1994
+ A12:1995
+ A13:1995
+ A14:1995
+ A15:1995
+ A16:1996
+ A17:1998
+ A18:1998
+ A19:2000
+ A1:1991
Note 2.1EN 60898-1:2003/A1:2004
IEC 60898-1:2002/A1:2002 (Modified)EN 60898-1:2003/AC:2004
EN 60898-1:2003/A11:2005
EN 60898-1:2003/A13:2012
Cenelec
EN 60898-2:2006
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation
IEC 60898-2:2000 (Modified) + A1:2003 (Modified)EN 60898-2:2001
Note 2.1Cenelec
EN 60931-1:1996
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
IEC 60931-1:1996EN 60931-1:1993
Note 2.1EN 60931-1:1996/A1:2003
IEC 60931-1:1996/A1:2002Cenelec
EN 60931-2:1996
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test
IEC 60931-2:1995EN 60931-2:1993
Note 2.1Cenelec
EN 60931-3:1996
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses
IEC 60931-3:1996Cenelec
EN 60934:2001
Circuit-breakers for equipment (CBE)
IEC 60934:2000EN 60934:1994
+ A11:1998
+ A1:1994
+ A2:1997
Note 2.1EN 60934:2001/A1:2007
IEC 60934:2000/A1:2007EN 60934:2001/A2:2013
IEC 60934:2000/A2:2013Cenelec
EN 60947-1:2007
Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60947-1:2007EN 60947-1:2004
Note 2.1EN 60947-1:2007/A2:2014
IEC 60947-1:2007/A2:201414/10/2017
EN 60947-1:2007/A1:2011
IEC 60947-1:2007/A1:2010Cenelec
EN 60947-2:2006
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60947-2:2006EN 60947-2:2003
Note 2.1EN 60947-2:2006/A1:2009
IEC 60947-2:2006/A1:2009EN 60947-2:2006/A2:2013
IEC 60947-2:2006/A2:2013Cenelec
EN 60947-3:2009
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008EN 60947-3:1999
+ A1:2001
+ A2:2005
Note 2.1EN 60947-3:2009/A1:2012
IEC 60947-3:2008/A1:2012EN 60947-3:2009/A2:2015
IEC 60947-3:2008/A2:201531/08/2018
Cenelec
EN 60947-4-1:2010
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2009EN 60947-4-1:2001
+ A1:2002
+ A2:2005
Note 2.1EN 60947-4-1:2010/A1:2012
IEC 60947-4-1:2009/A1:2012Cenelec
EN 60947-4-2:2012
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC 60947-4-2:2011EN 60947-4-2:2000
+ A1:2002
+ A2:2006
Note 2.1Cenelec
EN 60947-4-3:2000
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:1999HD 419.2 S1:1987
Note 2.1EN 60947-4-3:2000/A2:2011
IEC 60947-4-3:1999/A2:2011EN 60947-4-3:2000/A1:2006
IEC 60947-4-3:1999/A1:2006Cenelec
EN 60947-4-3:2014
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:2014EN 60947-4-3:2000
+ A1:2006
+ A2:2011
Note 2.111/06/2017
Cenelec
EN 60947-5-1:2004
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
IEC 60947-5-1:2003EN 60947-5-1:1997
+ A12:1999
+ A1:1999
+ A2:2000
Note 2.1EN 60947-5-1:2004/AC:2005
EN 60947-5-1:2004/A1:2009
IEC 60947-5-1:2003/A1:2009EN 60947-5-1:2004/AC:2004
Cenelec
EN 60947-5-2:2007
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
IEC 60947-5-2:2007EN 60947-5-2:1998
+ A1:1999
+ A2:2004
Note 2.1EN 60947-5-2:2007/A1:2012
IEC 60947-5-2:2007/A1:2012Cenelec
EN 60947-5-3:1999
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
IEC 60947-5-3:1999EN 60947-5-3:1999/A1:2005
IEC 60947-5-3:1999/A1:200501/03/2008
Cenelec
EN 60947-5-4:2003
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
IEC 60947-5-4:2002EN 60947-5-4:1997
Note 2.1Cenelec
EN 60947-5-5:1997
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
IEC 60947-5-5:1997EN 60947-5-5:1997/A11:2013
EN 60947-5-5:1997/A1:2005
IEC 60947-5-5:1997/A1:2005Cenelec
EN 60947-5-7:2003
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
IEC 60947-5-7:2003EN 50319:1999
Note 2.1Cenelec
EN 60947-5-8:2006
Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
IEC 60947-5-8:2006Cenelec
EN 60947-5-9:2007
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches
IEC 60947-5-9:2006Cenelec
EN 60947-6-1:2005
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
IEC 60947-6-1:2005EN 60947-6-1:1991
+ A11:1997
+ A1:1994
+ A2:1997
Note 2.1EN 60947-6-1:2005/A1:2014
IEC 60947-6-1:2005/A1:201317/01/2017
Cenelec
EN 60947-6-2:2003
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
IEC 60947-6-2:2002EN 60947-6-2:1993
+ A11:1997
+ A1:1997
+ A2:1999
Note 2.1EN 60947-6-2:2003/A1:2007
IEC 60947-6-2:2002/A1:2007Cenelec
EN 60947-7-1:2009
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 60947-7-1:2009EN 60947-7-1:2002
Note 2.1Cenelec
EN 60947-7-2:2009
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
IEC 60947-7-2:2009EN 60947-7-2:2002
Note 2.1Cenelec
EN 60947-7-3:2009
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
IEC 60947-7-3:2009EN 60947-7-3:2002
Note 2.1Cenelec
EN 60947-8:2003
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60947-8:2003EN 60947-8:2003/A2:2012
IEC 60947-8:2003/A2:2011EN 60947-8:2003/A1:2006
IEC 60947-8:2003/A1:2006Cenelec
EN 60950-1:2006
Information technology equipment - Safety - Part 1: General requirements
IEC 60950-1:2005 (Modified)EN 60950-1:2001
+ A11:2004
Note 2.1EN 60950-1:2006/A12:2011
EN 60950-1:2006/AC:2011
EN 60950-1:2006/A11:2009
EN 60950-1:2006/A1:2010
IEC 60950-1:2005/A1:2009 (Modified)EN 60950-1:2006/A2:2013
IEC 60950-1:2005/A2:2013 (Modified)02/07/2016
Cenelec
EN 60950-21:2003
Information technology equipment - Safety - Part 21: Remote power feeding
IEC 60950-21:2002Cenelec
EN 60950-22:2006
Information technology equipment - Safety - Part 22: Equipment installed outdoors
IEC 60950-22:2005 (Modified)EN 60950-22:2006/AC:2008
Cenelec
EN 60950-23:2006
Information technology equipment - Safety - Part 23: Large data storage equipment
IEC 60950-23:2005EN 60950-23:2006/AC:2008
Cenelec
EN 60968:2013
Self-ballasted lamps for general lighting services - Safety requirements
IEC 60968:2012EN 60968:1990
+ A1:1993
+ A2:1999
Note 2.1EN 60968:2013/A11:2014
09/12/2016
Cenelec
EN 60968:2015
Self-ballasted fluorescent lamps for general lighting services - Safety requirements
IEC 60968:2015 (Modified)
IEC 60968:2015/COR1:2015 (Modified)EN 60968:2013
+ A11:2014
Note 2.130/03/2018
Cenelec
EN 60974-1:2012
Arc welding equipment - Part 1: Welding power sources
IEC 60974-1:2012EN 60974-1:2005
Note 2.1Cenelec
EN 60974-2:2008
Arc welding equipment - Part 2: Liquid cooling systems
IEC 60974-2:2007EN 60974-2:2003
Note 2.101/02/2011
Cenelec
EN 60974-2:2013
Arc welding equipment - Part 2: Liquid cooling systems
IEC 60974-2:2013EN 60974-2:2008
Note 2.1Cenelec
EN 60974-3:2007
Arc welding equipment - Part 3: Arc striking and stabilizing devices
IEC 60974-3:2007EN 60974-3:2003
Note 2.1Cenelec
EN 60974-3:2014
Arc welding equipment - Part 3: Arc striking and stabilizing devices
IEC 60974-3:2013EN 60974-3:2007
Note 2.131/12/2016
Cenelec
EN 60974-5:2008
Arc welding equipment - Part 5: Wire feeders
IEC 60974-5:2007EN 60974-5:2002
Note 2.1Cenelec
EN 60974-5:2013
Arc welding equipment - Part 5: Wire feeders
IEC 60974-5:2013EN 60974-5:2008
Note 2.127/06/2016
Cenelec
EN 60974-6:2011
Arc welding equipment - Part 6: Limited duty equipment
IEC 60974-6:2010EN 60974-6:2003
Note 2.1Cenelec
EN 60974-6:2016
Arc welding equipment - Part 6: Limited duty equipment
IEC 60974-6:201527/10/2018
Cenelec
EN 60974-7:2005
Arc welding equipment - Part 7:Torches
IEC 60974-7:2005EN 60974-7:2000
Note 2.101/08/2008
Cenelec
EN 60974-7:2013
Arc welding equipment - Part 7:Torches
IEC 60974-7:2013EN 60974-7:2005
Note 2.1Cenelec
EN 60974-8:2009
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
IEC 60974-8:2009EN 60974-8:2004
Note 2.1Cenelec
EN 60974-11:2010
Arc welding equipment - Part 11: Electrode holders
IEC 60974-11:2010EN 60974-11:2004
Note 2.1Cenelec
EN 60974-12:2011
Arc welding equipment - Part 12: Coupling devices for welding cables
IEC 60974-12:2011EN 60974-12:2005
Note 2.1Cenelec
EN 60974-13:2011
Arc welding equipment - Part 13: Welding clamp
IEC 60974-13:2011Cenelec
EN 60998-1:2004
Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 60998-1:2002 (Modified)EN 60998-1:1993
+ A1:2001
Note 2.1Cenelec
EN 60998-2-1:2004
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 60998-2-1:2002 (Modified)EN 60998-2-1:1993
Note 2.1Cenelec
EN 60998-2-2:2004
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60998-2-2:2002 (Modified)EN 60998-2-2:1993
Note 2.1Cenelec
EN 60998-2-3:2004
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
IEC 60998-2-3:2002 (Modified)EN 60998-2-3:1993
Note 2.1Cenelec
EN 60998-2-4:2005
Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices
IEC 60998-2-4:2004 (Modified)EN 60998-2-4:1993
Note 2.1Cenelec
EN 60999-1:2000
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
IEC 60999-1:1999EN 60999-1:1993
Note 2.1Cenelec
EN 60999-2:2003
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
IEC 60999-2:2003Cenelec
EN 61008-1:2004
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules
IEC 61008-1:1996 (Modified) + A1:2002 (Modified)EN 61008-1:1994
+ A11:1995
+ A12:1998
+ A13:1998
+ A14:1998
+ A17:2000
+ A2:1995
Note 2.1EN 61008-1:2004/A11:2007
EN 61008-1:2004/A12:2009
Cenelec
EN 61008-1:2012
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-1:2010 (Modified)EN 61008-1:2004
+ A11:2007
+ A12:2009
Note 2.118/06/2017
EN 61008-1:2012/A1:2014
IEC 61008-1:2010/A1:2012 (Modified)04/08/2017
EN 61008-1:2012/A2:2014
IEC 61008-1:2010/A2:2013 (Modified)04/08/2017
EN 61008-1:2012/A11:2015
06/07/2018
Cenelec
EN 61008-2-1:1994
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage
IEC 61008-2-1:1990EN 61008-2-1:1994/A11:1998
EN 61008-2-1:1994/A11:1998/AC:1999
Cenelec
EN 61009-1:2004
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules
IEC 61009-1:1996 (Modified) + A1:2002 (Modified)EN 61009-1:1994
+ A11:1995
+ A13:1998
+ A14:1998
+ A15:1998
+ A19:2000
+ A1:1995
+ A2:1998
Note 2.1EN 61009-1:2004/AC:2006
EN 61009-1:2004/A11:2008
EN 61009-1:2004/A13:2009
EN 61009-1:2004/A12:2009
Cenelec
EN 61009-1:2012
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-1:2010 (Modified)EN 61009-1:2004
+ A11:2008
+ A12:2009
+ A13:2009
Note 2.118/06/2017
EN 61009-1:2012/A2:2014
IEC 61009-1:2010/A2:2013 (Modified)04/08/2017
EN 61009-1:2012/A1:2014
IEC 61009-1:2010/A1:2012 (Modified)04/08/2017
EN 61009-1:2012/A11:2015
06/07/2018
Cenelec
EN 61009-2-1:1994
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage
IEC 61009-2-1:1991EN 61009-2-1:1994/A11:1998/AC:1999
EN 61009-2-1:1994/A11:1998
Cenelec
EN 61010-1:2010
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61
IEC 61010-1:2010EN 61010-1:2001
Note 2.1Cenelec
EN 61010-2-010:2003
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material
IEC 61010-2-010:2003EN 61010-2-010:1994
+ A1:1996
Note 2.101/10/2006
Cenelec
EN 61010-2-010:2014
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
IEC 61010-2-010:2014EN 61010-2-010:2003
Note 2.1Cenelec
EN 61010-2-020:2006
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:2006EN 61010-2-020:1994
+ A1:1996
Note 2.101/07/2009
Cenelec
EN 61010-2-030:2010
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
IEC 61010-
IEC 61010-2-030:2010Cenelec
EN 61010-2-032:2012
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
IEC 61010-2-032:2012EN 61010-2-032:2002
Note 2.1Cenelec
EN 61010-2-033:2012
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
IEC 61010-2-033:2012Cenelec
EN 61010-2-040:2005
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-040:2005EN 61010-2-041:1996
EN 61010-2-042:1997
EN 61010-2-043:1997
EN 61010-2-045:2000
Note 2.101/06/2008
Cenelec
EN 61010-2-051:2003
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2003EN 61010-2-051:1995
Note 2.101/10/2006
Cenelec
EN 61010-2-051:2015
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2015EN 61010-2-051:2003
Note 2.1Cenelec
EN 61010-2-061:2003
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IEC 61010-2-061:2003EN 61010-2-061:1996
Note 2.101/10/2006
Cenelec
EN 61010-2-061:2015
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IEC 61010-2-061:2015EN 61010-2-061:2003
Note 2.1Cenelec
EN 61010-2-081:2002
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001EN 61010-2-081:2002/A1:2003
IEC 61010-2-081:2001/A1:200301/10/2006
Cenelec
EN 61010-2-081:2015
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2015EN 61010-2-081:2002
+ A1:2003
Note 2.1Cenelec
EN 61010-2-091:2012
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
IEC 61010-2-091:2012EN 61010-2-091:2012/AC:2013
Cenelec
EN 61010-2-201:2013
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
IEC 61010-2-201:2013EN 61010-2-201:2013/AC:2013
Cenelec
EN 61010-031:2002
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 61010-031:2002EN 61010-2-031:1994
Note 2.101/02/2005
EN 61010-031:2002/A1:2008
IEC 61010-031:2002/A1:200801/03/2011
Cenelec
EN 61010-031:2015
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 61010-031:2015EN 61010-031:2002
+ A1:2008
Note 2.1Cenelec
EN 61028:1993
Electrical measuring instruments - X-Y recorders
IEC 61028:1991EN 61028:1993/A2:1997
IEC 61028:1991/A2:1997Cenelec
EN 61034-1:2005
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005EN 50268-1:1999
Note 2.101/06/2008
EN 61034-1:2005/A1:2014
IEC 61034-1:2005/A1:201326/07/2016
Cenelec
EN 61034-2:2005
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005EN 50268-2:1999
Note 2.101/06/2008
EN 61034-2:2005/A1:2013
IEC 61034-2:2005/A1:201325/06/2016
Cenelec
EN 61048:2006
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
IEC 61048:2006EN 61048:1993
+ A1:1996
+ A2:1999
Note 2.1EN 61048:2006/A1:2016
IEC 61048:2006/A1:201519/02/2019
Cenelec
EN 61050:1992
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) - General and safety requirements
IEC 61050:1991 (Modified)EN 61050:1992/A1:1995
IEC 61050:1991/A1:1994 (Modified)Cenelec
EN 61058-1:2002
Switches for appliances - Part 1: General requirements
IEC 61058-1:2000 (Modified) + A1:2001EN 61058-1:1992
+ A1:1993
Note 2.1EN 61058-1:2002/A2:2008
IEC 61058-1:2000/A2:2007Cenelec
EN 61058-2-1:2011
Switches for appliances - Part 2-1: Particular requirements for cord switches
IEC 61058-2-1:2010EN 61058-2-1:1993
+ A11:2002
+ A1:1996
Note 2.1Cenelec
EN 61058-2-4:2005
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
IEC 61058-2-4:1995 + A1:2003Cenelec
EN 61058-2-5:2011
Switches for appliances - Part 2-5: Particular requirements for change-over selectors
IEC 61058-2-5:2010EN 61058-2-5:1994
+ A11:2002
Note 2.1Cenelec
EN 61071:2007
Capacitors for power electronics
IEC 61071:2007EN 61071-1:1996
EN 61071-2:1996
Note 2.1Cenelec
EN 61095:2009
Electromechanical contactors for household and similar purposes
IEC 61095:2009EN 61095:1993
+ A11:1996
+ A1:2000
Note 2.1Cenelec
EN 61131-2:2007
Programmable controllers - Part 2: Equipment requirements and tests
IEC 61131-2:2007EN 61131-2:2003
Note 2.1Cenelec
EN 61138:2007
Cables for portable earthing and short-circuiting equipment
IEC 61138:2007 (Modified)EN 61138:1997
+ A11:2003
Note 2.1Cenelec
EN 61140:2002
Protection against electric shock - Common aspects for installation and equipment
IEC 61140:2001EN 61140:2002/A1:2006
IEC 61140:2001/A1:2004 (Modified)Cenelec
EN 61143-1:1994
Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements
IEC 61143-1:1992EN 61143-1:1994/A1:1997
IEC 61143-1:1992/A1:1997Cenelec
EN 61143-2:1994
Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
IEC 61143-2:1992Cenelec
EN 61184:2008
Bayonet lampholders
IEC
IEC 61184:2008EN 61184:1997
+ A1:2001
+ A2:2004
Note 2.1EN 61184:2008/A1:2011
Cenelec
EN 61187:1994
Electrical and electronic measuring equipment - Documentation
IEC 61187:1993 (Modified)EN 61187:1994/AC:1995
Cenelec
EN 61195:1999
Double-capped fluorescent lamps - Safety specifications
IEC 61195:1999EN 61195:1994
+ A1:1998
Note 2.1EN 61195:1999/A1:2013
IEC 61195:1999/A1:2012EN 61195:1999/A2:2015
IEC 61195:1999/A2:201424/10/2017
Cenelec
EN 61199:2011
Single-capped fluorescent lamps - Safety specifications
IEC 61199:2011EN 61199:1999
Note 2.1EN 61199:2011/A1:2013
IEC 61199:2011/A1:2012EN 61199:2011/A2:2015
IEC 61199:2011/A2:201403/09/2017
Cenelec
EN 61204:1995
Low-voltage power supply devices, d.c. output - Performance characteristics
IEC 61204:1993 (Modified)Cenelec
EN 61204-7:2006
Low voltage power supplies, d.c. output - Part 7: Safety requirements
IEC 61204-7:2006EN 61204-7:2006/A11:2009
Cenelec
EN 61210:2010
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
IEC 61210:2010 (Modified)EN 61210:1995
Note 2.1Cenelec
EN 61230:2008
Live working - Portable equipment for earthing or earthing and short-circuiting
IEC 61230:2008EN 61230:1995
+ A11:1999
Note 2.101/10/2011
Cenelec
EN 61242:1997
Electrical accessories - Cable reels for household and similar purposes
IEC 61242:1995 (Modified)EN 61242:1997/A1:2008/AC:2010
EN 61242:1997/A1:2008
IEC 61242:1995/A1:2008EN 61242:1997/A2:2016
IEC 61242:1995/A2:201503/12/2018
Cenelec
EN 61243-3:2010
Live working - Voltage detectors - Part 3: Two-pole low-voltage type
IEC 61243-3:2009EN 61243-3:1998
Note 2.1Cenelec
EN 61243-3:2014
Live working - Voltage detectors - Part 3: Two-pole low-voltage type
IEC 61243-3:2014EN 61243-3:2010
Note 2.113/11/2017
EN 61243-3:2014/AC:2015
EN 61243-3:2014/AC:2015
Cenelec
EN 61270-1:1996
Capacitors for microwave ovens - Part 1: General
IEC 61270-1:1996Cenelec
EN 61293:1994
Marking of electrical equipment with ratings related to electrical supply - Safety requirements
IEC 61293:1994Cenelec
EN 61310-1:2008
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61310-1:2007EN 61310-1:1995
Note 2.1Cenelec
EN 61310-2:2008
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
IEC 61310-2:2007EN 61310-2:1995
Note 2.1Cenelec
EN 61310-3:2008
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 61310-3:2007EN 61310-3:1999
Note 2.1Cenelec
EN 61316:1999
Industrial cable reels
IEC 61316:1999Cenelec
EN 61347-1:2008
Lamp controlgear - Part 1: General and safety requirements
IEC 61347-1:2007 (Modified)EN 61347-1:2001
+ A1:2008
Note 2.1EN 61347-1:2008/A2:2013
IEC 61347-1:2007/A2:2012EN 61347-1:2008/A1:2011
IEC 61347-1:2007/A1:2010Cenelec
EN 61347-1:2015
Lamp controlgear - Part 1: General and safety requirements
IEC 61347-1:2015EN 61347-1:2008
+ A1:2011
+ A2:2013
Note 2.126/03/2018
Cenelec
EN 61347-2-2:2012
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-2:2011EN 61347-2-2:2001
+ A1:2006
+ A2:2006
Note 2.1Cenelec
EN 61347-2-3:2011
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 6134
IEC 61347-2-3:2011EN 61347-2-3:2001# + A1:2004# + A2:2006
EN 61347-2-4:2001
Note 2.1EN 61347-2-3:2011/AC:2011
Cenelec
EN 61347-2-7:2012
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-7:2011EN 61347-2-7:2006
Note 2.1Cenelec
EN 61347-2-8:2001
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8:2000EN 60920:1991
+ A11:2000
+ A1:1993
+ A2:1996
Note 2.1EN 61347-2-8:2001/AC:2003
EN 61347-2-8:2001/A1:2006
2-8:2000/A1:2006EN 61347-2-8:2001/AC:2010
Cenelec
EN 61347-2-9:2013
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9:2012EN 61347-2-9:2001
+ A1:2003
+ A2:2006
Note 2.1Cenelec
EN 61347-2-10:2001
Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-10:2000EN 61347-2-10:2001/AC:2010
EN 61347-2-10:2001/A1:2009
IEC 61347-2-10:2000/A1:2008Cenelec
EN 61347-2-11:2001
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-11:2001EN 61347-2-11:2001/AC:2002
EN 61347-2-11:2001/AC:2010
Cenelec
EN 61347-2-12:2005
Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-12:2005EN 61347-2-12:2005/A1:2010
IEC 61347-2-12:2005/A1:2010EN 61347-2-12:2005/AC:2010
Cenelec
EN 61347-2-13:2006
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
IEC 61347-2-13:2006EN 61347-2-13:2006/AC:2010
Cenelec
EN 61347-2-13:2014
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
IEC 61347-2-13:2014EN 61347-2-13:2006
Note 2.108/10/2017
Cenelec
EN 61386-1:2008
Conduit systems for cable management - Part 1: General requirements
IEC 61386-1:2008EN 61386-1:2004
Note 2.1Cenelec
EN 61386-21:2004
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems
IEC 61386-21:2002EN 50086-2-1:1995
+ A11:1998
Note 2.1EN 61386-21:2004/A11:2010
EN 61386-21:2004/AC:2004
Cenelec
EN 61386-22:2004
Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems
IEC 61386-22:2002EN 50086-2-2:1995
+ A11:1998
Note 2.1EN 61386-22:2004/AC:2004
EN 61386-22:2004/A11:2010
Cenelec
EN 61386-23:2004
Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems
IEC 61386-23:2002EN 50086-2-3:1995
+ A11:1998
Note 2.1EN 61386-23:2004/A11:2010
EN 61386-23:2004/AC:2004
Cenelec
EN 61386-24:2010
Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
IEC 61386-24:2004EN 50086-2-4:1994
+ A1:2001
Note 2.1Cenelec
EN 61386-25:2011
Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
IEC 61386-25:2011Cenelec
EN 61439-1:2011
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 61439-1:2011EN 61439-1:2009
Note 2.1Cenelec
EN 61439-2:2011
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
IEC 61439-2:2011EN 61439-2:2009
Note 2.1Cenelec
EN 61439-3:2012
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
IEC 61439-3:2012EN 60439-3:1991
+ A1:1994
+ A2:2001
Note 2.1Cenelec
EN 61439-4:2013
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
IEC 61439-4:2012EN 60439-4:2004
Note 2.1Cenelec
EN 61439-5:2011
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
IEC 61439-5:2010EN 60439-5:2006
Note 2.103/01/2016
Cenelec
EN 61439-5:2015
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
IEC 61439-5:2014EN 61439-5:2011
Note 2.1EN 61439-5:2015/AC:2015
Cenelec
EN 61439-6:2012
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
IEC 61439-6:2012EN 60439-2:2000
+ A1:2005
Note 2.1Cenelec
EN 61534-1:2011
Powertrack systems - Part 1: General requirements
IEC 61
IEC 61534-1:2011EN 61534-1:2003
Note 2.1EN 61534-1:2011/A1:2014
IEC 61534-1:2011/A1:201404/08/2017
Cenelec
EN 61534-21:2006
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
IEC 61534-21:2006Cenelec
EN 61534-21:2014
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
IEC 61534-21:2014EN 61534-21:2006
Note 2.124/07/2017
Cenelec
EN 61534-22:2009
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation
IEC 61534-22:2009Cenelec
EN 61534-22:2014
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
IEC 61534-22:2014EN 61534-22:2009
Note 2.124/07/2017
Cenelec
EN 61535:2009
Installation couplers intended for permanent connection in fixed installations
IEC 61535:2009 (Modified)EN 61535:2009/A1:2013
IEC 61535:2009/A1:201220/06/2015
Cenelec
EN 61537:2007
Cable management - Cable tray systems and cable ladder systems
IEC 61537:2006EN 61537:2001
Note 2.1Cenelec
EN 61549:2003
Miscellaneous lamps
IEC 61549:2003EN 61549:1996
+ A1:1997
+ A2:2001
Note 2.1EN 61549:2003/A1:2005
IEC 61549:2003/A1:2005EN 61549:2003/A3:2012
IEC 61549:2003/A3:2012EN 61549:2003/A2:2010
IEC 61549:2003/A2:2010Cenelec
EN 61557-1:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
IEC 61557-1:2007EN 61557-1:1997
Note 2.1Cenelec
EN 61557-2:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
IEC 61557-2:2007EN 61557-2:1997
Note 2.1Cenelec
EN 61557-3:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
IEC 61557-3:2007EN 61557-3:1997
Note 2.1Cenelec
EN 61557-4:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
IEC 61557-4:2007EN 61557-4:1997
Note 2.1Cenelec
EN 61557-5:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
IEC 61557-5:2007EN 61557-5:1997
Note 2.1Cenelec
EN 61557-6:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
IEC 61557-6:2007EN 61557-6:1998
Note 2.1Cenelec
EN 61557-7:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
IEC 61557-7:2007EN 61557-7:1997
Note 2.1Cenelec
EN 61557-8:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
IEC 61
IEC 61557-8:2007EN 61557-8:1997
Note 2.1Cenelec
EN 61557-8:2015
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
IEC 61557-8:2014EN 61557-8:2007
Note 2.115/01/2018
Cenelec
EN 61557-9:2009
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
IEC 61557-9:2009EN 61557-9:1999
Note 2.1Cenelec
EN 61557-9:2015
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
IEC 61557-9:2014EN 61557-9:2009
Note 2.115/01/2018
Cenelec
EN 61557-10:2001
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
IEC 61557-10:2000Cenelec
EN 61557-10:2013
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
IEC 61557-10:2013EN 61557-10:2001
Note 2.103/06/2016
Cenelec
EN 61557-11:2009
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
IEC 61557-11:2009Cenelec
EN 61557-12:2008
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
IEC 61557-12:2007Cenelec
EN 61557-13:2011
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
IEC 61557-13:2011Cenelec
EN 61557-14:2013
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
IEC 61557-14:2013Cenelec
EN 61557-15:2014
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC 61557-15:2014Cenelec
EN 61557-16:2015
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment
IEC 61557-16:2014Cenelec
EN 61558-1:1997
Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
IEC 61558-1:1997 (Modified)EN 60742:1995
Note 2.101/12/2005
EN 61558-1:1997/A11:2003
01/12/2005
EN 61558-1:1997/A1:1998
IEC 61558-1:1997/A1:199801/01/2001
EN 61558-1:1997/AC:2003
Cenelec
EN 61558-1:2005
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-1:2005EN 61558-1:1997
+ A11:2003
+ A1:1998
Note 2.1EN 61558-1:2005/A1:2009
IEC 61558-1:2005/A1:2009EN 61558-1:2005/AC:2006
Cenelec
EN 61558-2-1:2007
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 61558-2-1:2007EN 61558-2-1:1997
Note 2.1Cenelec
EN 61558-2-2:2007
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
IEC 61558-2-2:2007EN 61558-2-2:1998
Note 2.1Cenelec
EN 61558-2-3:2010
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
IEC 61558-2-3:2010EN 61558-2-3:2000
Note 2.1Cenelec
EN 61558-2-4:2009
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
IEC 61558-2-4:2009EN 61558-2-4:1997
Note 2.1Cenelec
EN 61558-2-5:2010
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units
IEC 61558-2-5:2010EN 61558-2-5:1998
+ A11:2004
Note 2.1Cenelec
EN 61558-2-6:2009
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 61558-2-6:2009EN 61558-2-6:1997
Note 2.1Cenelec
EN 61558-2-7:2007
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
IEC 61558-2-7:2007 (Modified)EN 61558-2-7:1997
+ A11:2002
Note 2.1Cenelec
EN 61558-2-8:2010
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
IEC 61558-2-8:2010EN 61558-2-8:1998
Note 2.1Cenelec
EN 61558-2-9:2011
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
IEC 61558-2-9:2010EN 61558-2-9:2003
Note 2.1Cenelec
EN 61558-2-12:2011
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
IEC 61558-2-12:2011EN 61558-2-12:2001
Note 2.1Cenelec
EN 61558-2-13:2009
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
IEC 61558-2-13:2009EN 61558-2-13:2000
Note 2.1Cenelec
EN 61558-2-14:2013
Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
IEC 61558-2-14:2012Cenelec
EN 61558-2-15:2012
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations
IEC 61558-2-15:2011EN 61558-2-15:2001
Note 2.1Cenelec
EN 61558-2-16:2009
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
IEC 61558-2-16:2009EN 61558-2-17:1997
Note 2.1EN 61558-2-16:2009/A1:2013
IEC 61558-2-16:2009/A1:201316/09/2016
Cenelec
EN 61558-2-20:2011
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
IEC 61558-2-20:2010EN 61558-2-20:2000
Note 2.1Cenelec
EN 61558-2-23:2010
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
IEC 61558-2-23:2010EN 61558-2-23:2000
Note 2.1Cenelec
EN 61558-2-26:2013
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes
IEC 61558-2-26:2013Cenelec
EN 61643-11:2012
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC 61643-11:2011 (Modified)EN 61643-11:2002
+ A11:2007
Note 2.1Cenelec
EN 61643-21:2001
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC 616
IEC 61643-21:2000EN 61643-21:2001/A1:2009
IEC 61643-21:2000/A1:2008 (Modified)EN 61643-21:2001/A2:2013
IEC 61643-21:2000/A2:2012Cenelec
EN 61730-1:2007
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IEC 61730-1:2004 (Modified)EN 61730-1:2007/A1:2012
IEC 61730-1:2004/A1:2011EN 61730-1:2007/A2:2013
IEC 61730-1:2004/A2:2013EN 61730-1:2007/A11:2014
13/10/2017
Cenelec
EN 61730-2:2007
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
IEC 61730-2:2004 (Modified)EN 61730-2:2007/A1:2012
IEC 61730-2:2004/A1:2011Cenelec
EN 61770:2009
Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
IEC 61770:2008EN 61770:1999
+ A1:2004
+ A2:2006
Note 2.1EN 61770:2009/AC:2011
Cenelec
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
IEC 61800-5-1:2007EN 61800-5-1:2003
Note 2.1Cenelec
EN 61812-1:2011
Time relays for industrial and residential use - Part 1: Requirements and tests
IEC 61812-1:2011EN 61812-1:1996
+ A11:1999
Note 2.1Cenelec
EN 61851-1:2011
Electric vehicle conductive charging system - Part 1: General requirements
IEC 61851-1:2010EN 61851-1:2001
Note 2.1Cenelec
EN 61851-21:2002
Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
IEC 61851-21:2001Cenelec
EN 61851-22:2002
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
IEC 61851-22:2001Cenelec
EN 61851-23:2014
Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
IEC 61851-23:2014Cenelec
EN 61851-24:2014
Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
IEC 61851-24:2014EN 61851-24:2014/AC:2015
Cenelec
EN 61869-1:2009
Instrument transformers - Part 1: General requirements
IEC 61869-1:2007 (Modified)Cenelec
EN 61869-2:2012
Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61869-2:2012Cenelec
EN 61869-3:2011
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
IEC 61869-3:2011Cenelec
EN 61869-4:2014
Instrument transformers - Part 4: Additional requirements for combined transformers
IEC 61869-4:2013EN 61869-4:2014/AC:2014
Cenelec
EN 61869-5:2011
Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
IEC 61869-5:2011EN 61869-5:2011/AC:2015
Cenelec
EN 61914:2009
Cable cleats for electrical installations
IEC 61914:2009EN 50368:2003
Note 2.1EN 61914:2009/AC:2009
Cenelec
EN 61914:2016
Cable cleats for electrical installations
IEC 61914:2015EN 61914:2009
Note 2.128/12/2018
Cenelec
EN 61921:2003
Power capacitors - Low-voltage power factor correction banks
IEC 61921:2003Cenelec
EN 61995-1:2008
Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements
IEC 61995-1:2005 (Modified)Cenelec
EN 61995-2:2009
Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL
IEC 61995-2:2009Cenelec
EN 62020:1998
Electrical accessories - Residual current monitors for household and similar uses (RCMs)
IEC 62020:1998EN 62020:1998/A1:2005
IEC 62020:1998/A1:2003 (Modified)Cenelec
EN 62026-1:2007
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules
IEC 62026-1:2007Cenelec
EN 62026-2:2013
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
IEC 62026-2:2008 (Modified)Cenelec
EN 62026-3:2009
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
IEC 62026-3:2008Cenelec
EN 62026-3:2015
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
IEC 62026-3:2014
IEC 62026-3:2014/COR1:2015EN 62026-3:2009
Note 2.126/09/2017
Cenelec
EN 62026-7:2013
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
IEC 62026-7:2010 (Modified)Cenelec
EN 62031:2008
LED modules for general lighting - Safety specifications
IEC 62031:2008EN 62031:2008/A2:2015
IEC 62031:2008/A2:201424/10/2017
EN 62031:2008/A1:2013
IEC 62031:2008/A1:2012Cenelec
EN 62035:2000
Discharge lamps (excluding fluorescent lamps) - Safety specifications
IEC 62035:1999 (Modified)EN 62035:2000/A1:2003
IEC 62035:1999/A1:2003 (Modified)EN 62035:2000/A2:2012
IEC 62035:1999/A2:2012Cenelec
EN 62035:2014
Discharge lamps (excluding fluorescent lamps) - Safety specifications
IEC 62035:2014 (Modified)EN 62035:2000
+ A1:2003
+ A2:2012
Note 2.115/09/2017
Cenelec
EN 62040-1:2008
Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS
IEC 62
IEC 62040-1:2008EN 62040-1-1:2003
EN 62040-1-2:2003
Note 2.1EN 62040-1:2008/A1:2013
IEC 62040-1:2008/A1:2013EN 62040-1:2008/AC:2009
Cenelec
EN 62080:2009
Sound signalling devices for household and similar purposes
IEC 62080:2001 + A1:2008Cenelec
EN 62094-1:2003
Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements
IEC 62094-1:2002EN 62094-1:2003/A11:2003
Cenelec
EN 62109-1:2010
Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
IEC 62109-1:2010Cenelec
EN 62109-2:2011
Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters
IEC 62109-2:2011Cenelec
EN 62135-1:2008
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
IEC 62135-1:2008EN 50063:1989
Note 2.1Cenelec
EN 62135-1:2015
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
IEC 62135-1:2015EN 62135-1:2008
Note 2.111/06/2018
Cenelec
EN 62196-1:2012
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-1:2011EN 62196-1:2003
Note 2.1EN 62196-1:2012/A12:2014
16/06/2017
EN 62196-1:2012/A11:2013
15/10/2017
EN 62196-1:2012/AC:2012
Cenelec
EN 62196-1:2014
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 62196-1:2014 (Modified)EN 62196-1:2012
+ A11:2013
+ A12:2014
Note 2.106/10/2019
Cenelec
EN 62196-2:2012
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
IEC 62196-2:2011EN 62196-2:2012/A11:2013
15/10/2017
EN 62196-2:2012/A12:2014
16/06/2017
EN 62196-2:2012/A12:2014/AC:2014
Cenelec
EN 62196-3:2014
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
IEC 62196-3:2014Cenelec
EN 62208:2011
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
IEC 62208:2011EN 62208:2003
Note 2.1Cenelec
EN 62233:2008
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
IEC 62233:2005 (Modified)EN 50366:2003
+ A1:2006
+ A1:2006
Note 2.1EN 62233:2008/AC:2008
Cenelec
EN 62253:2011
Photovoltaic pumping systems - Design qualification and performance measurements
IEC 62253:2011Cenelec
EN 62275:2009
Cable management systems - Cable ties for electrical installations
IEC 62275:2006 (Modified)EN 50146:2000
Note 2.1Cenelec
EN 62275:2015
Cable management systems - Cable ties for electrical installations
IEC 62275:2013 (Modified)EN 62275:2009
Note 2.119/01/2018
Cenelec
EN 62282-3-100:2012
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 62282-3-100:2012EN 62282-3-1:2007
Note 2.1Cenelec
EN 62282-3-300:2012
Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
IEC 62282-3-300:2012EN 62282-3-3:2008
Note 2.1Cenelec
EN 62282-5-1:2012
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 62282-5-1:2012Cenelec
EN 62310-1:2005
Static transfer systems (STS) - Part 1: General and safety requirements
IEC 62310-1:2005Cenelec
EN 62311:2008
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
IEC 62311:2007 (Modified)Cenelec
EN 62368-1:2014
Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified)
IEC 62368-1:2014 (Modified)EN 60065:2014# + A1:2015# + A:2014
EN 60950-1:2006# + A11:2009# + A12:2011# + A1:2010# + A2:2013
Note 2.120/06/2019
EN 62368-1:2014/AC:2015
EN 62368-1:2014/AC:2015
EN 62368-1:2014/AC:2015
Cenelec
EN 62395-1:2006
Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
IEC 62395-1:2006Cenelec
EN 62395-1:2013
Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
IEC 62395-1:2013EN 62395-1:2006
Note 2.1Cenelec
EN 62423:2009
Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)
IEC 62423:2007 (Modified)Cenelec
EN 62423:2012
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
IEC 62423:2009 (Modified)EN 62423:2009
Note 2.119/06/2017
Cenelec
EN 62444:2013
Cable glands for electrical installations
IEC 62444:2010 (Modified)EN 50262:1998
+ A1:2001
+ A2:2004
Note 2.1Cenelec
EN 62471:2008
Photobiological safety of lamps and lamp systems
IEC 62471:2006 (Modified)EN 60825-1:1994
+ A11:1996
+ A1:2002
+ A2:2001
Note 2.1Cenelec
EN 62477-1:2012
Safety requirements for power electronic converter systems and equipment - Part 1: General
IEC 62477-1:2012EN 50178:1997
Note 2.1EN 62477-1:2012/A11:2014
18/07/2017
Cenelec
EN 62479:2010
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
IEC 62479:2010 (Modified)EN 50371:2002
Note 2.1Cenelec
EN 62493:2010
Assessment of lighting equipment related to human exposure to electromagnetic fields
IEC 62493:2009Cenelec
EN 62532:2011
Fluorescent induction lamps - Safety specifications
IEC 62532:2011Cenelec
EN 62549:2011
Articulated systems and flexible systems for cable guiding
IEC 62549:2011Cenelec
EN 62560:2012
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
IEC 62560:2011 (Modified)EN 62560:2012/A1:2015
IEC 62560:2011/A1:2015 (Modified)04/05/2018
EN 62560:2012/A1:2015/AC:2015
EN 62560:2012/AC:2015
Cenelec
EN 62606:2013
General requirements for arc fault detection devices
IEC
IEC 62606:2013 (Modified)Cenelec
EN 62626-1:2014
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
IEC 62626-1:2014Cenelec
HD 62640:2015
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
IEC 62640:2011 (Modified)Cenelec
EN 62776:2015
Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
IEC 62776:2014
IEC 62776:2014/COR1:2015Cenelec
EN 62868:2015
Organic light emitting diode (OLED) panels for general lighting - Safety requirements
IEC 62868:2014(1) ESO: European standardisation organisation:
CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu)
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu)
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)
Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.
Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.
Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.