Growth

Ecodesign and energy labelling - Vacuum cleaners

Ecodesign and energy labelling - Vacuum cleaners

Regulation (EU) No 666/2013

Regulation (EU) No 665/2013

Short name:

Ecodesign and energy labelling - Vacuum cleaners

Base:

Commission Delegated Regulation (EU) No 665/2013 of 3 May 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Counciol with regard to energy labelling of vacuum cleaners OJ L 192 of 13.7.2013

Commission Regulation (EU) No 666/2013 of 8 July 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for vacuum cleaners OJ L 192 of 13.7.2013

Modification:

[-]

Standardisation request:(M/540) COMMISSION IMPLEMENTING DECISION C(2015)8753 final of 11.12.2015 on a standardisation request to the European standardisation organisations in support of Commission Delegated Regulation (EU) No 665/2013 of 3 May 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of vacuum cleaners and Commission Regulation (EU) No 666/2013 of 8 July 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for vacuum cleaners

Directives/regulations repealed:

[-]

Guide for application:

Guidelines accompanying Commission Delegated Regulation (EU) No 665/2013 and (EU) No 666/2013 on vacuum cleaners – September 2014

Guidance on CE marking for professionals

Commission contact point for this product group:

DG Energy, Energy Efficiency Unit
Tel. +32 2 299 12 58
Email
Webpage: Energy efficiency - Ecodesign of Energy-Using Products

For information about the content and availability of European standards, please contact the European Standardisation Organisations.

 

Publications in the Official Journal:

 


Stay up to date with the references of harmonised standards for these Directives, published in the Official Journal by subscribing to the RSS feed  RSS

 

Summary list of titles and references of harmonised standards under Directive 666/2013 for 665/2013 Ecodesign - Energy Labelling – Vacuum Cleaners

The summary list hereunder is a compilation of the references of harmonised standards which have been generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the publication of the references of harmonised standards in the Official Journal of the European Union.
Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal gives legal effect.

 

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

ESO (1)

Reference and title of the standard
(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard
Note 1

Cenelec

EN 60312-1:2013

Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 60312-1:2010 (Modified) + A1:2011 (Modified)

20/08/2014 

 

 

This standard needs to be completed to clearly indicate those legal requirements aimed to be covered.
Clauses 5.9, 6.15, 6Z1.2.3, 6Z1.2.4, 6.Z1.2.5 and 6.Z2.3 are not part of the present citation. In clause 7.2.2.5 read ‘A2 fine test dust’ instead of ‘test dust’. In clause 7.3.2 read ‘insert of aluminium’ instead of ‘insert of pine or equivalent material wood’.

Cenelec

EN 60312-1:2017 (new)

Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 60312-1:2010 (Modified) + A1:2011 (Modified)

This is the first publication 

EN 60312-1:2013

Note 2.1 

01/09/2017 

Clauses 5.9, 6.15, 6.Z1.2.3, 6.Z1.2.4, 6.Z1.2.5, 6.Z2.3 and 6.Z3 are not part of the present citation. In clause 7.2.2.5 read ‘A2 fine test dust’ instead of ‘test dust’.

Cenelec

EN 60335-2-2:2010

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2:2009

20/08/2014 

 

 

EN 60335-2-2:2010/A1:2013
IEC 60335-2-2:2009/A1:2012

 

20/08/2014 

Note 3 

20/12/2015 

EN 60335-2-2:2010/A11:2012

 

20/08/2014 

Note 3 

01/02/2015 

This standard needs to be completed to clearly indicate those legal requirements aimed to be covered.

Cenelec

EN 60335-2-69:2012

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
IEC 60335-2-69:2012 (Modified)

20/08/2014 

 

 

This standard needs to be completed to clearly indicate those legal requirements aimed to be covered.

Cenelec

EN 60704-2-1:2001

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners
IEC 60704-2-1:2000

20/08/2014 

 

 

This standard needs to be completed to clearly indicate those legal requirements aimed to be covered.

Cenelec

EN 60704-2-1:2015

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners
IEC 60704-2-1:2014

11/11/2016 

EN 60704-2-1:2001

Note 2.1 

26/06/2017 

(1) ESO: European standardisation organisation:

CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu)

CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

 

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.