Mining and quarrying statistics - NACE Rev. 2
Data extracted in March 2020
Planned article update: March 2021
The mining and quarrying sector employed 413 000 people in the EU in 2017.
17 500 enterprises were classified to mining and quarrying in the EU in 2017.
This article presents an overview of statistics for European Union (EU) mining and quarrying, covering NACE Rev. 2 Section B. It belongs to a set of statistical articles on 'Business economy by sector' .
There were around 17 500 enterprises operating with mining and quarrying (Section B) as their main activity in the EU-27 in 2017. Together they employed 413 200 persons, equivalent to 0.3 % of all persons employed in the non-financial business economy (Sections B to J and L to N and Division 95), while they generated EUR 40.0 billion of value added which was 0.6 % of the non-financial business economy total.
The wage-adjusted labour productivity ratio combines apparent labour productivity and average personnel costs and shows the extent to which value added per person employed covers average personnel costs per employee. Due to the high productivity and only slightly elevated average personnel costs, the EU-27’s mining and quarrying sector in 2017 had a wage-adjusted labour productivity ratio of 260 %, which was the third highest ratio across any of the NACE sections within the non-financial business economy.
Around 85 % of the enterprises within the EU-27’s mining and quarrying sector extracted materials that were non-metallic and not fossil fuels and were thus classified in other mining and quarrying (Division 08) — these enterprises were relatively small in size. The two largest subsectors in terms of employment were the mining of coal and lignite (Division 05) and other mining and quarrying, each occupying more than 30.0 % of the mining and quarrying employment. In output terms, the relative significance of the extraction of fossil fuels was far greater, as the extraction of crude petroleum and natural gas (Division 06) accounted for 38.5 % of EU-27 sectoral turnover, while a further 29.9 % of sectoral turnover was derived from other mining and quarrying, and 13.1 % from mining of metal ores (Division 07). Mining of coal and lignite accounted for one tenth of the sector’s turnover (11.6 %) while the mining support service activities (Division 09) had the lowest share of turnover (6.9 %) in 2017.
As can be seen from Figure 1, the contribution of the various subsectors to the EU-27’s mining and quarrying total varied considerably depending on whether value added or employment was the basis for the analysis. The variation in the relative significance of the different subsectors was even more amplified for some of the derived indicators concerning personnel costs, labour productivity and profitability, as shown in Table 2b.
The high apparent labour productivity is present in the subsector of extraction of crude petroleum and natural gas where apparent labour productivity reached EUR 303 000 per person employed, higher than any other NACE division within the whole of the non-financial business economy. On the other hand, other mining and quarrying recorded five times less apparent labour productivity (EUR 59 000 per person employed), but still above the non-financial business economy average (EUR 49 500 per person employed).
At the NACE division level, personnel costs per employee in the EU-27 peaked at an average of EUR 58 200 per employee for the extraction of crude petroleum and natural gas in 2017, ahead of other mining and quarrying activities (EUR 34 900 per employee), slightly above the non-financial business economy average (EUR 34 700 per employee) while a somewhat lower level of average personnel costs was recorded for the mining of coal and lignite (EUR 28 700 per employee).
Wage-adjusted labour productivity ratios for EU-27 mining and quarrying NACE divisions in 2017 exceeded the non-financial business economy average (142.7 %), strongly pulled upwards by the extraction of crude petroleum and natural gas subsector (567.0 %). This subsector achieved the highest wage-adjusted labour productivity ratios among all of the NACE divisions within the whole of the non-financial business economy.
Poland recorded the highest share (22.8 %) of EU-27 value added within the mining and quarrying sector in 2017. The Netherlands, as well as Germany and Sweden, were also relatively large producers within the EU in value added terms. The Polish mining and quarrying employment of more than 137 500 persons was equivalent to one third (33.3 %) of the EU-27 total, and was followed by the Germany (12.7 %) and Romania (9.1 %). The five largest Member States in the mining and quarrying sector accounted for a share of EU-27 value added that was less than the non-financial business economy as a whole, while in terms of employment it was in line with the non-financial business economy as a whole (see Figure 3).
The relative significance of the mining and quarrying sector across the EU Member States tended to be highest among those countries specialised in the extraction of fossil fuels: these figures were closely linked to the geological distribution of fossil fuel deposits which were scarce or non-existent in many of the Member States. Bulgaria recorded the highest ratio in mining of metal ores while Denmark was the most specialised in the extraction of crude petroleum and natural gas (as shown in Table 3).
These various specialisations are reflected in the derived indicators shown in Table 4b. For example, Member States with a high degree of specialisation in the extraction of crude petroleum and natural gas recorded high apparent labour productivity for mining and quarrying as a whole, as can be seen for the Netherlands, Denmark and Sweden.
Size class analysis
The enterprise size structure of the EU-27’s mining and quarrying sector would appear to be dominated by large enterprises (employing 250 or more persons) — almost two thirds (64.6 %) of sectoral value added was generated by less than 200 large enterprises and these also employed two thirds (60.6 %) of the total number of persons employed in 2017.
However, this overall situation for mining and quarrying is a combination of different structures in the subsectors within the EU-27. Some activities are particularly concentrated in only a few locations and characterised by a high dominance of large enterprises: for mining of coal and lignite they contributed 98.6 % of value added in 2016, while for the mining support service activities they contributed 47.0 % . On the other hand, in other mining and quarrying, SMEs (employing fewer than 250 persons) accounted for almost 80.0 % (data for 2017).
The region of Śląskie in southern Poland (whose capital city is Katowice) recorded the highest number of persons employed, across NUTS level 2 regions within the EU-27, for the mining and quarrying sector in 2017. With 79 400 persons, Śląskie accounted for approximately 19.2 % of the total number of persons employed in the EU-27 in this sector. The second highest number of persons employed among EU-27 countries was also recorded in Poland in Dolnoslaskie region (20 300). The Norwegian region of Agder og Rogaland also recorded a high number of persons employed (34 800). Most of the remaining EU regions with large employment in this sector were in Poland and Romania. Excluding the three Norwegian regions in the top 20, the remaining 17 regions together accounted for more than 50 % of the EU-27’s mining and quarrying employment, underlining the concentration of large parts of mining and quarrying in a relatively small number of regions.
The relative significance of the mining and quarrying sector can be analysed by comparing the employment of this sector with the non-financial business economy employment. Among the 171 NUTS level 2 regions for which data are available in 2017, the median share of the mining and quarrying sector in the non-financial business economy employment was 0.2 %. In the vast majority of regions (156), the mining and quarrying sector accounted for less than 1.0 % of the non-financial business economy employment. Indeed, the mining and quarrying sector accounted for 1.0 % or more of the non-financial business economy employment in just 15 of the 171 regions for which data are available across the EU-27.
In keeping with the ranking of employment levels, the contribution of the mining and quarrying sector to non-financial business economy employment was relatively high in several of the Member States that joined the EU in 2004 or 2007.
Data sources and availability
Mining and quarrying, covers NACE Rev. 2 Section B. This activity concerns the extraction of:
- fossil fuels such as coal (Division 05), crude petroleum and natural gas (Division 06);
- ferrous and non-ferrous metal ores (Division 07);
- construction materials (for example, stone and sand) and other industrial materials such as salt, phosphates and gemstones (Division 08);
- it also includes mining support service activities (Division 09).
Note that this article only covers extractive activities, and not the downstream processing of fuel, nor the manufacture of non-metallic mineral products, both of which are classified under manufacturing (Section C), nor the network supply of energy (Section D) (Section D).
The analysis presented in this article is based on the main dataset for structural business statistics (SBS), size class data and regional data, all of which are published annually.
The main series provides information for each EU Member State as well as a number of non-member countries at a detailed level according to the activity classification NACE. Data are available for a wide range of variables.
In structural business statistics, size classes are generally defined by the number of persons employed. A limited set of the standard structural business statistics variables (for example, the number of enterprises, turnover, persons employed and value added) are analysed by size class, mostly down to the three-digit (group) level of NACE. The main size classes used in this article for presenting the results are:
- small and medium-sized enterprises (SMEs): with 1 to 249 persons employed, further divided into;
- micro enterprises: with less than 10 persons employed;
- small enterprises: with 10 to 49 persons employed;
- medium-sized enterprises: with 50 to 249 persons employed;
- large enterprises: with 250 or more persons employed.
Regional SBS data are available at NUTS levels 1 and 2 for most of the EU Member States, Iceland and Norway, mostly down to the two-digit (division) level of NACE. Regional data for Croatia was not available for 2012. The main variable analysed in this article is the number of persons employed. The type of statistical unit used for regional SBS data is normally the local unit, which is an enterprise or part of an enterprise situated in a geographically identified place. Local units are classified into sectors (by NACE) normally according to their own main activity, but in some EU Member States the activity code is assigned on the basis of the principal activity of the enterprise to which the local unit belongs. The main SBS data series are presented at national level only, and for this national data the statistical unit is the enterprise. It is possible for the principal activity of a local unit to differ from that of the enterprise to which it belongs. Hence, national SBS data from the main series are not necessarily directly comparable with national aggregates compiled from regional SBS.
The location of mining and quarrying generally reflects the spatial distribution of mineral deposits. However, there can be considerable cost differences between mines, for example, in relation to the depth at which deposits are found, or whether they are on land or at sea. Aside from geographical and geological cost differences, the decision of whether or not to (re-)open a mine may also depend, among others, on global, commodity prices, employment practices, as well as regulations concerning the environmental impact of mining or the disposal of its waste. Opencast (or surface) mines and quarries are generally cheaper than deep mines — although they may be rejected in the planning stage due to their effect on local landscapes. All forms of mining and quarrying incur environmental costs, which may relate to the disposal of waste, increased pollution, potential for ground subsidence, or changes to the local supply and quality of water.
The mining and quarrying sector is characterised as a capital-intensive activity. This is particularly the case for projects that require exploration and test drilling in advance of the considerable investment required to establish a new mine or off-shore drilling facility. As such, the global mining and quarrying sector is characterised by a relatively small number of international enterprise groups that operate across the continents — some with extraction and/or support service operations in the EU. These large-scale producers are particularly common in the extraction of fossil fuels. The vast majority of hard coal and lignite that is extracted or imported into the EU is consumed as a transformation input, mostly used in conventional thermal power stations or in coke oven plants. Over several decades the EU’s coal mining activity has been in decline due to competition from coal imports and the substitution of other fuels to produce electricity, the latter stimulated in part by efforts to reduce emissions. Crude oil is essentially a transformation input, used in refineries.
Many of the products resulting from the activity of this sector are traded globally and prices are established on global markets. One of the most closely followed prices is the price of crude oil, which is not only of interest for this sector itself, but also for the many downstream activities that are intensive users of energy as well as the chemicals sector that uses petroleum as a raw material.
The extraction of construction materials is dominated by a large number of smaller enterprises, typically serving a local market in low-value, widely-available products. Whilst the EU is largely self-sufficient in the extraction of construction materials, there are a large number of other minerals that are essential for downstream manufacturing activities for which there is no indigenous supply within the EU; for example the EU has high net imports of metallic minerals. Other industrial minerals are often further processed in downstream industrial sectors, for example, in the manufacture of glass, concrete and basic or agricultural chemicals. Minerals are also used in industrial processes and precious and semi-precious stones and metals are used in jewellery and for some industrial processes.
Policies related to energy and to climate change are particularly important for many parts of the mining and quarrying sector. The EU aims to become a low-carbon, energy-efficient economy in the coming decades. The integrated energy and climate change policy laid out in December 2008 aims to cut greenhouse gases by 20 %, reduce energy consumption by 20 % through increased energy efficiency and to meet 20 % of the EU’s energy needs from renewable sources by 2020 — these goals will have implications on the way extractive activities operate. In a Communication in November 2010 the European Commission presented its Energy 2020 strategy for competitive, sustainable and secure energy — see also an article on the electricity, gas, steam and air conditioning supply sector.
- SBS - industry and construction (sbs_ind_co)
- Annual detailed enterprise statistics - industry and construction (sbs_na_ind)
- Annual detailed enterprise statistics for industry (NACE Rev. 2 B-E) (sbs_na_ind_r2)
- SMEs - Annual enterprise statistics by size class - industry and construction (sbs_sc_ind)
- Industry by employment size class (NACE Rev. 2 B-E) (sbs_sc_ind_r2)
- Annual detailed enterprise statistics - industry and construction (sbs_na_ind)
- SBS - regional data - all activities (sbs_r)
- SBS data by NUTS 2 regions and NACE Rev. 2, from 2008 onwards (sbs_r_nuts06_r2)