Statistics Finland

Economic Statistics

FIN-00022 Statistics Finland

Statistics on Private non-profit R&D (PNPRD) measure research and experimental development (R&D) performed in the private non-profit sector, i.e. R&D expenditure and R&D personnel. In line with this objective the target population for the national R&D survey of the private non-profit sector should consist of all R&D performing units (including all R&D performers – occasional and continuous, known and unknown - in all branches and size classes) belonging to this sector.

The main concepts and definitions used for the production of R&D statistics are given by the OECD (2015), Frascati Manual 2015: Guidelines for Collecting and Reporting Data on Research and Experimental Development, The Measurement of Scientific, Technological and Innovation Activities, which is the internationally recognised standard methodology for collecting R&D statistics and by Eurostat’s European Business Statistics Methodological Manual on R&D Statistics (EBS Methodological Manual on R&D Statistics).

Since the beginning of 2021, the collection of R&D statistics is based on Commission Implementing Regulation (EU) No 2020/1197 of 30 July 2020. The Regulation sets the framework for the collection of R&D statistics and specifies the main variables of interest and their breakdowns at predefined level of detail. Statistics on science, technology and innovation were collected until the end of 2020 based on the Commission Implementing Regulation (EU) No 2012/995 concerning the production and development of Community statistics on science and technology.  

• The distribution of principal economic activity and by product field is based on Statistical classification of economic activities in the European Community (NACE Rev. 2);
• The local units for the statistics are compiled at regional level according to NUTS 2 – Nomenclature of Territorial Units for Statistics;
• The distribution by socioeconomic objectives (SEO) is based on Nomenclature for the Analysis and Comparisons of Scientific Programmes and Budgets (NABS);
• The fields of research and development based on Classification and distribution by Fields of Research and Development (FORD).

See below.

According to the Frascati Manual, expenditure on extramural R&D (i.e. R&D performed outside the statistical unit) is not included in intramural R&D performance totals (FM, §4.12).

See below.

See below.

R&D person-years performed during a calendar year of survey by persons employed of the unit. A R&D person-year is defined as full-time R&D work for one person (including 4-6 weeks annual leave). Frascati recommendation at least 0,1 FTE applied.

The statistical unit is the institutional unit as defined by Council Regulation (EEC) No 1993/696 of 15 March 1993.

See below.

The target population is the population for which inferences are made. The frame (or frames, as sometimes several frames are used) is a device that permits access to population units. The frame population is the set of population units which can be accessed through the frame and the survey data really refer to this population of institutional units.

The objective of the European R&D statistics is to cover all intramural R&D activities. In line with this objective, the target population for the national R&D survey of the PNP Sector should consist of all R&D performing units (including known R&D performers or assumed to perform R&D). In practise however, countries in their R&D surveys might have difficulty in identifying R&D activities at the municipality level. 

Not requested. R&D statistics cover national and regional data.

Not requested. See point 3.4.

Not requested. The base year for the unit Purchasing Power Standard (PPS) and PPS per inhabitant at constant prices is currently 2005. All calculations of non-basic unit (national currencies) are done by Eurostat.

HC: number of persons; FTE: person-years; expenditure, source of funds: 1 000 euros.

Calendar year.

See below.

- Frascati Manual 2015, Guidelines for Collecting and Reporting Data on Research and Experimental Development

- European Business Statistics Methodological Manual on R&D

Not requested.

Confidentiality, being one of the process quality components, concerns the privacy of data providers (households, enterprises, administrations and other respondents), the confidentiality of the information they provide and the extent of its use for statistical purposes.

A property of data indicating the extent to which their unauthorised disclosure could be prejudicial or harmful to the interest of the source or other relevant parties.

a)       Confidentiality protection required by law:

Unit level data on persons, households and enterprises are confidential. However, data on the government sector organisations are in principle not confidential.

b)       Confidentiality commitments of survey staff:

As specified in the Statistics Act and it's implementation in Statistics Finland.

Number of respondents, dominance.

Publicly available release calendar.

Open access in the website of Statistics Finland: https://www.tilastokeskus.fi/en/future-releases

Open access to publication and databases in the website of Statistics Finland. Release information for users by standard protocols of Statistics Finland.

Annual.

See below.

1) Y - Yes, N – No

See below.

1) Y – Yes, N - No 

https://pxdata.stat.fi/PxWeb/pxweb/en/StatFin/StatFin__tkke/

Not requested.

See below.

See below.

Not requested.

1) Y – Yes, N - No 

https://stat.fi/en/statistics/documentation/tkke

Not requested.

See below.

Quality management requires comprehensive guidance of activities. The principles of the European Foundation for Quality Management (EFQM principles) are employed by Statistics Finland as its overall framework for quality management. The quality management framework of the field of statistics is the European Statistics Code of Practice (CoP). The frameworks complement each other. The quality criteria of Official Statistics of Finland are also compatible with the European Statistics Code of Practice.

Some of the activities undertaken in order to assure a high quality of business R&D statistics:

- use of official registers of high quality
- two reminding letters to the non-respondents, personal contacts to the large R&D performers
- training of the personnel responsible for data editing
- external audits of the R&D statistics according to the practices of Statistics Finland's quality management

See below.

1)       Users' class codification

1- Institutions:
• European level: Commission (DGs, Secretariat General), Council, European Parliament, ECB, other European agencies etc.
• in Member States, at the national or regional level: Ministries of Economy or Finance, other ministries (for sectoral comparisons), National Statistical Institutes and other statistical agencies (norms, training, etc.), and
• International organisations: OECD, UN, IMF, ILO, etc.

2- Social actors: Employers’ associations, trade unions, lobbies, among others, at the European, national or regional level.

3- Media: International or regional media – specialized or for the general public – interested both in figures and analyses or comments. The media are the main channels of statistics to the general public.

4- Researchers and students (Researchers and students need statistics, analyses, ad hoc services, access to specific data.)

5- Enterprises or businesses (Either for their own market analysis, their marketing strategy (large enterprises) or because they offer consultancy services)

6- Other (User class defined for national purposes, different from the previous classes.)

To evaluate if users' needs have been satisfied, the best way is to use user satisfaction surveys.

See below.

Not available.

Share of PNP R&D expenditure in GERD (Gross Domestic Expenditure on R&D): 0,8%

1) This question is optional. It refers to variables and breakdowns NOT asked by the Commission Implementing Regulation (EU) No 2020/1197 (neither as 'optional').

2) Y-start year

Accuracy in the statistical sense denotes the closeness of computations or estimates to the exact or true values. Statistics are not equal with the true values because of variability (the statistics change from implementation to implementation of the survey due to random effects) and bias (the average of the possible values of the statistics from implementation to implementation is not equal to the true value due to systematic effects).

Several types of statistical errors occur during the survey process. The following typology of errors has been adopted:

1. Sampling errors. These only affect sample surveys. They are due to the fact that only a subset of the population, usually randomly selected, is enumerated.

2. Non-sampling errors. Non-sampling errors affect sample surveys and complete enumerations alike and comprise:

a) Coverage errors,

b) Measurement errors,

c) Non response errors and

d) Processing errors.

Model assumption errors should be treated under the heading of the respective error they are trying to reduce.

That part of the difference between a population value and an estimate thereof, derived from a random sample, which is due to the fact that only a subset of the population is enumerated.

The main indicator used to measure sampling errors is the coefficient of variation (CV). 
Definition of coefficient of variation: 
CV= (Square root of the estimate of the sampling variance) / (Estimated value)

Coefficient of variation for Total R&D expenditure : Not applicable, census.

Coefficient of variation for Total R&D personnel (FTE) :  Not applicable, census.

Non-sampling errors occur in all phases of a survey. They add to the sampling errors (if present) and contribute to decreasing overall accuracy. It is important to assess their relative weight in the total error and devote appropriate resources for their control and assessment.

a)       Extent of non-sampling errors: Not known, assumed to be small. 

b)       Measures taken to reduce the extent of non-sampling errors: Detailed instructions accompany the survey questionnaire, respondent support by phone and email. The online questionnaire assists the respondent by alerting logical inconsistencies, missing items etc.

c)       Methods used in order to correct / adjust for such errors: -

Coverage errors are due to divergences between the target population and the frame population. The frame population is the set of target population members that has a chance to be selected into the survey sample. It is a listing of all items in the population from which the sample is drawn that contains contact details as well as sufficient information to perform stratification and sampling.

Not requested.

Not requested.

Not requested.

Not requested.

Not requested.

Not requested.

Not requested.

Not requested.

Timeliness and punctuality refer to time and dates, but in a different manner: the timeliness of statistics reflects the length of time between their availability and the event or phenomenon they describe. Punctuality refers to the time lag between the release date of the data and the target date on which they should have been delivered, with reference to dates announced in the official release calendar.

Time lag between the end of reference period and the release date of the results:
Indicator: (Release date of provisional/ first results) - (Date of reference for the data)

a) End of reference period: 31.12.2021

b) Date of first release of national data: 27.10.2022

c) Lag (days): 301

a) End of reference period: 31.12.2021

b) Date of first release of national data: 301

c) Lag (days): 301

Punctuality refers to the time lag between the release date of data and the target date on which they were scheduled for release as announced officially.

Punctuality of time schedule of data release = (Actual date of the data release) - (Scheduled date of the data release)

See below.

Not requested.

No deviations from the Frascati manual or other international guidelines.

The following table lists a number of key survey concepts and conceptual issues; it gives reference to the Commission Implementing Regulation (EU) No 2020/1197 or Frascati manual paragraphs and the EBS Methodological Manual on R&D Statistics with recommendations about these concepts / issues.

The following table lists a number of key methodological issues, which may affect the international comparability of national R&D statistics. The table gives the references in the Frascati manual, where related recommendations are made. Countries are asked to report on the existence of any deviations from existing recommendations and comment upon.

See below.

See below.

1)       Breaks years are years for which data are not fully comparable to the previous period.

Annual survey.

See below.

Not requested.

According to the FM.  R&D data are used in the SNA.

See below.

This part compares key R&D variables as preliminary and final data.

(1)    Calculate the average remuneration (cost) of individuals belonging to the internal R&D personnel, excluding those who are only formally ‘employees’ (university students, grant holders, etc.).

(2)    Calculate the average remuneration (cost) of individuals belonging to the external R&D personnel (FTEs/other current R&D costs for external R&D personnel).

The assessment of costs associated with a statistical product is a rather complicated task since there must exist a mechanism for appointing portions of shared costs (for instance shared IT resources and dissemination channels) and overheads (office space, utility bills etc). The assessment must become detailed and clear enough so that international comparisons among agencies of different structures are feasible. 

1)       The shares of the figures given in the first column that are accounted for by payments to private firms or other Government agencies.

1)        T = the time required to provide the information, including time spent assembling information prior to completing a form or taking part in interview and the time taken up by any subsequent contacts after receipt of the questionnaire (‘Re-contact time’)

Not requested.

Not requested.

Not requested.

Several separate activities are used for the collection of raw data or pre-compiled administrative data and statistics related to R&D. For simplicity, we call them surveys irrespective of whether they are sample surveys, censuses, collections of administrative data/pre-compiled statistics. This section presents the names of the surveys by sector of performance as well as methodological information for each survey. Depending on the type of survey and sector of performance, only the sections corresponding to that survey and sector are filled in.

Annual data collection.

See below.

1) comparison of the responses against the previous year, checking any inconsistencies with particular attention to the large R&D performers
2) checking the outliers in respect to overall distributions
3) micro editing based on the logical rules
4) macro level checks for any inconsistencies in the tabulations

See below.

Not relevant.

Not requested.

Not requested.