Statistics Lithuania

State Data Agency

Knowledge Economy and Special Survey Statistics Division

29 Gedimino Ave., LT-01500 Vilnius, Lithuania

Statistics on higher education R&D (HERD) measure research and experimental development (R&D) performed in the higher education sector, i.e. R&D expenditure and R&D personnel. In line with this objective the target population for the national R&D survey of the higher education sector should consist of all R&D performing institutional units (including all R&D performers – occasional and continuous, known and unknown - in all branches and size classes) belonging to this sector.

The main concepts and definitions used for the production of R&D statistics are given by the OECD (2015), Frascati Manual 2015: Guidelines for Collecting and Reporting Data on Research and Experimental Development, The Measurement of Scientific, Technological and Innovation Activities, which is the internationally recognised standard methodology for collecting R&D statistics and Eurostat’s European Business Statistics Methodological Manual on R&D Statistics(EBS Methodological Manual on R&D Statistics) complements this with guidelines for further harmonisation among EU, EFTA and candidate countries.

Since the beginning of 2021, the collection of R&D statistics is based on Commission Implementing Regulation (EU) No 2020/1197 of 30 July 2020. The Regulation sets the framework for the collection of R&D statistics and specifies the main variables of interest and their breakdowns at predefined level of detail. Statistics on science, technology and innovation were collected until the end of 2020 based on Commission Implementing Regulation (EU) No 2012/995 concerning the production and development of Community statistics on science and technology.

• The local unit for the statistics are compiled at regional level according to NUTS 2 – Nomenclature of Territorial Units for Statistics;
• The distribution by socioeconomic objectives (SEO) are based on Nomenclature for the Analysis and Comparisons of Scientific Programmes and Budgets (NABS);
• The fields of research and development are based on Classification and distribution by Fields of Research and Development (FORD).

See below.

According to the Frascati Manual, expenditure on extramural R&D (i.e. R&D performed outside the statistical unit) is not included in intramural R&D performance totals (FM, §4.12).

See below.

See below.

By FM recommendation: FTE are reported by the reporting unit.

The statistical unit is the institutional unit as defined by Council Regulation (EEC) No 1993/696 of 15 March 1993, if there are deviations please explain.

All universities, colleges of technology and other institutions providing formal tertiary education programmes, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under direct control of or administered by or associated with higher education institutions.

See below.

The target population is the population for which inferences are made. The frame (or frames, as sometimes several frames are used) is a device that permits access to population units. The frame population is the set of population units which can be accessed through the frame and the survey data really refer to this population of institutional units.

The objective of the European R&D statistics is to cover all intramural R&D activities. In line with this objective, the target population for the national R&D survey of the HES Sector should consist of all R&D performing institutional units (including known R&D performers or assumed to perform R&D). In practise however, countries in their R&D surveys might have difficulty in identifying R&D activities at the municipality level. 

Not requested. R&D statistics cover national and regional data.

Not requested. See point 3.4.

Not requested. The base year for the unit Purchasing Power Standard (PPS) and PPS per inhabitant at constant prices is currently 2005. All calculations of non-basic unit (national currencies) are done by Eurostat.

R&D expenditure – EUR thousand;

R&D personnel –  persons HC, FTE.

Reference period is the calendar year.

See below.

- Frascati Manual 2015, Guidelines for Collecting and Reporting Data on Research and Experimental Development

- European Business Statistics Methodological Manual on R&D Statistics

Not requested.

Confidentiality, being one of the process quality components, concerns the privacy of data providers (households, enterprises, administrations and other respondents), the confidentiality of the information they provide and the extent of its use for statistical purposes.

A property of data indicating the extent to which their unauthorised disclosure could be prejudicial or harmful to the interest of the source or other relevant parties.

a)       Confidentiality protection required by law:

In the process of statistical data collection, processing and analysis and dissemination of statistical information, Statistics Lithuania fully guarantees confidentiality of the data submitted by respondents (households, enterprises, institutions, organisations and other statistical units), as defined in the Confidentiality policy guidelines of Statistics Lithuania.

b)       Confidentiality commitments of survey staff:

Every individual staff member is obliged by internal rules to a strictly confidential treatment of information.

Statistical Disclosure Control Manual, approved by Order No DĮ-107 of 26 April 2022 of the Director General of Statistics Lithuania;

The State Data Governance Information System Data Security Regulations and Rules for the Secure Management of Electronic Information in the State Data Governance Information System, approved by Order No DĮ-202 of 27 August 2021 of the Director General of Statistics Lithuania.

Statistical information is published on the Official Statistics Portal according to the Official Statistics Calendar.

The release calendar is accessible on the website.

Official Statistics Calendar

Statistical information is prepared and disseminated under the principle of impartiality and objectivity, i.e. in a systematic, reliable and unbiased manner, following professional and ethical standards (the European Statistics Code of Practice), and the policies and practices followed are transparent to users and survey respondents.

All users have equal access to statistical information. All statistical information is published at the same time – at 9 a.m. on the day of publication of statistical information as indicated in the calendar on the Official Statistics Portal. Relevant statistical information is sent automatically to news subscribers.

The President and Prime Minister of the Republic of Lithuania, their advisers, the Ministers of Finance, Economy and Innovation, as well as Social Security and Labour of the Republic of Lithuania or their authorized persons, as well as, in exceptional cases, external experts and researchers have the right to receive early statistical information. The specified persons are entitled to receive statistical reports on GDP, inflation, employment and unemployment and other particularly relevant statistical reports one day prior to the publication of this statistical information on the Official Statistics Portal. Before exercising the right of early receipt of statistical information, a person shall sign an undertaking not to disseminate the statistical information received before it has been officially published.

Statistical information is published following the Official Statistics Dissemination Policy Guidelines and Statistical Information Dissemination and Communication Rules of Statistics Lithuania approved by Order No DĮ-176 of 2 July 2021 of the Director General of Statistics Lithuania.

Annual

See below.

1) Y - Yes, N – No

See below.

1) Y – Yes, N - No 

Statistical indicators are published in the Database of Indicators (Science and technology -> Research and development (R&D)).

Not requested.

See below.

See below.

Not requested.

1) Y – Yes, N - No 

Methodological documents are published on the Official Statistics Portal in the section Research and Development (R&D).

Not requested.

See below.

Quality of statistical information and its production process is ensured by the provisions of the European Statistics Code of Practice and ESS Quality Assurance Framework.

In 2007, a quality management system, conforming to the requirements of the international quality management system standard ISO 9001, was introduced at Statistics Lithuania. Main trends in activity of Statistics Lithuania aimed at quality management and continuous development in the institution are established in the Quality Policy.

Monitoring of the quality indicators of statistical processes and their results and self-evaluation of statistical survey managers is regularly carried out in order to identify areas which need improvement and to promptly eliminate shortcomings.

More information on assurance of quality of statistical information and its preparation is published in the Quality Management section on the Statistics Lithuania website.

The quality of the statistical results shall meet the requirements of accuracy, timeliness and punctuality, comparability and consistency.

 In 2020, a self-assessment of the head of the survey of R&D was carried out. It showed that the results of the survey meet the requirements for the quality of statistical information. When evaluating statistical indicators, quality of the obtained information is analyzed. Results of calculation are compared with the results of the previous year. Outliers are identified and analysed. In case of significant discrepancies, data providers are contacted and reasons are determined. If inaccuracies are detected, data are corrected. 

See below.

1)       Users' class codification

1- Institutions:
• European level: Commission (DGs, Secretariat General), Council, European Parliament, ECB, other European agencies etc.
• in Member States, at the national or regional level: Ministries of Economy or Finance, other ministries (for sectoral comparisons), National Statistical Institutes and other statistical agencies (norms, training, etc.), and
• International organisations: OECD, UN, IMF, ILO, etc.

2- Social actors: Employers’ associations, trade unions, lobbies, among others, at the European, national or regional level.

3- Media: International or regional media – specialized or for the general public – interested both in figures and analyses or comments. The media are the main channels of statistics to the general public.

4- Researchers and students (Researchers and students need statistics, analyses, ad hoc services, access to specific data.)

5- Enterprises or businesses (Either for their own market analysis, their marketing strategy (large enterprises) or because they offer consultancy services)

6- Other (User class defined for national purposes, different from the previous classes.)

To evaluate if users' needs have been satisfied, the best way is to use user satisfaction surveys.

See below.

According to the Official Statistics Programme Part I, 100 per cent of statistical information is published.

Completeness is assessed via comparison of the data delivered against the requirements of Commission Implementing Regulation (EU) No 2020/1197. The Regulation (EU) stipulates periodicity of variables that should be provided, breakdowns and if they should be provided mandatory or on voluntary basis.

Criteria:

A) Obligatory data. Only 'Very Good' = 100%, Poor' >95%; 'Very Poor' <100% apply.

B) Optional data. 'Very Good' = 100%; 'Good' = >75%; 'Satisfactory' 50 to 75%%; 'Poor' 25 to 50%; 'Very Poor' 0 to 25%.

See below.

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) Y-start year, N – data not available

1) This question is optional. It refers to variables and breakdowns NOT asked by the Commission Implementing Regulation (EU) No 2020/1197 (neither as 'optional').

2) Y-start year

Accuracy in the statistical sense denotes the closeness of computations or estimates to the exact or true values. Statistics are not equal with the true values because of variability (the statistics change from implementation to implementation of the survey due to random effects) and bias (the average of the possible values of the statistics from implementation to implementation is not equal to the true value due to systematic effects).

Several types of statistical errors occur during the survey process. The following typology of errors has been adopted:

1. Sampling errors. These only affect sample surveys. They are due to the fact that only a subset of the population, usually randomly selected, is enumerated.

2. Non-sampling errors. Non-sampling errors affect sample surveys and complete enumerations alike and comprise:

a) Coverage errors,

b) Measurement errors,

c) Non response errors and

d) Processing errors.

Model assumption errors should be treated under the heading of the respective error they are trying to reduce.

1)  Ranking of the type(s) of errors that result in over/under-estimation, from the most important source of error (1) to the least important source of error (5). In the event that errors of a particular type do not exist, is used the sign ‘-‘.

2)  The perceived direction of the ‘overall’ error using the signs “+” for over estimation, “-” for under estimation and “+/-” when assumption of the direction of the error cannot be made for R&D.

1) 'Very Good' = High level of coverage (annual rate of substitution in the target population lower than 5%). High average rates of response (>80%) in census and sample surveys. Full data consistency with reference to totals and relationships between variables in the dataset sent to Eurostat.  

2) 'Good' = In the event that at least one out of the three criteria above described would not be fully met.

3) 'Satisfactory' = In the event that the average rate of response would be lower than 60% even by meeting the two remaining criteria.

4) 'Poor' = In the event that the average rate of response would be lower than 60% and at least one of the two remaining criteria would not be met.

5) 'Very Poor' = If all the three criteria are not met.

That part of the difference between a population value and an estimate thereof, derived from a random sample, which is due to the fact that only a subset of the population is enumerated.

The main indicator used to measure sampling errors is the coefficient of variation (CV).
Definition of coefficient of variation:
CV= (Square root of the estimate of the sampling variance) / (Estimated value)

No sampling error. Census survey.

Census survey. 

Non-sampling errors occur in all phases of a survey. They add to the sampling errors (if present) and contribute to decreasing overall accuracy. It is important to assess their relative weight in the total error and devote appropriate resources for their control and assessment.

Census survey.

Coverage errors are due to divergences between the target population and the frame population. The frame population is the set of target population members that has a chance to be selected into the survey sample. It is a listing of all items in the population from which the sample is drawn that contains contact details as well as sufficient information to perform stratification and sampling.

a)       Description/assessment of coverage errors:

Not applicable.

b)      Measures taken to reduce their effect:

Not applicable.

Not applicable.

Not requested.

Measurement errors occur during data collection and generate bias by recording values different than the true ones (e.g. difficulty to distinguish intramural from extramural R&D Expenditure). The survey questionnaire used for data collection may have led to the recording of wrong values, or there may be respondent or interviewer bias.

a)       Description/assessment of measurement errors: Respondent mistakes

b)      Measures taken to reduce their effect: prepare guidelines for respondents

Non-response occurs when a survey failed to collect data on all survey variables from all the population units designated for data collection in a sample or complete enumeration.

There are two elements of non-response:

-Unit non-response which occurs when no data (or so little as to be unusable) are collected on a designated population unit.

-Item non-response which occurs when data only on some, but not all survey variables are collected on a designated population unit.

The extent of response (and accordingly of non response) is also measured with response rates. 

The main interest is to judge if the response from the target population was satisfactory by computing the un-weighted response rate.

Definition: Eligible are the survey units which indeed belong to the target population. Frame imperfections always leave the possibility that some units may not belong to the target population. Moreover, when there is no contact with certain units and no other way to establish their eligibility they are characterised as ‘unknown eligibility units’.

Un-weighted Unit Non- Response Rate = 1 - (Number of units with a response) / (Total number of eligible and unknown eligibility units in the survey) 

Definition:
Un-weighted Item Non-Response Rate (%) = 1-(Number of units with a response for the item) / (Total number of eligible , for the item, units in the sample) * 100

When the online questionnaire is enabled, there are sent reminders about the upcoming deadline for submission of the report. After that there are also phone calls made and urging e-mails and letters sent.

Between data collection and the beginning of statistical analysis, data must undergo a certain processing: coding, data entry, data editing, imputation, etc. Errors introduced at these stages are called processing errors. Data editing identifies inconsistencies or errors in the data.

Not requested.

Timeliness and punctuality refer to time and dates, but in a different manner: the timeliness of statistics reflects the length of time between their availability and the event or phenomenon they describe. Punctuality refers to the time lag between the release date of the data and the target date on which they should have been delivered, with reference to dates announced in the official release calendar.

Time lag between the end of reference period and the release date of the results:
Indicator: (Release date of provisional/ first results) - (Date of reference for the data)

a) End of reference period: 31.12.2021

b) Date of first release of national data: 17.06.2022

c) Lag (days): 168

a) End of reference period: 31.12.2021

b) Date of first release of national data: 17.06.2022

c) Lag (days): 168

Punctuality refers to the time lag between the release date of data and the target date on which they were scheduled for release as announced officially.

Punctuality of time schedule of data release = (Actual date of the data release) - (Scheduled date of the data release)

See below.

Not requested.

Survey accordande with FM. There is no problems with international comparability.

The following table lists a number of key survey concepts and conceptual issues; it gives reference to the Commission Implementing Regulation (EU) No 2020/1197  or Frascati manual and EBS Methodological Manual on R&D Statistics paragraphs with recommendations about these concepts/issues.

The following table lists a number of key methodological issues, which may affect the international comparability of national R&D statistics. The table gives the references in the Frascati manual, where related recommendations are made. Countries are asked to report on the existence of any deviations from existing recommendations and comment upon.

See below.

See below.

1)       Breaks years are years for which data are not fully comparable to the previous period.

Are the data produced in the same way in the odd and even years? If no, please explain the main differences.

Data collected annual.

This part deals with any national coherence assessments which may have been undertaken. It reports results for variables which are the same or relevant to R&D statistics, from other national surveys and / or administrative sources and explains and comments on their degree of agreement with R&D statistics. The education statistics (UNESCO/OECD/Eurostat (UOE)) include R&D expenditure in tertiary educational institutions and follow the recommendations of the Frascati manual regarding the definition of R&D expenditure. Due to the differences in the coverage some differences in the two datasets (UOE questionnaire and the R&D HES surveys) are expected. However, there is a need to ensure that a harmonised approach is used for compiling data in the two domains. The two statistical domains should aim for a consistent use of R&D coefficients for splitting teaching and research time.

Not requested.

The indicators of institutional sectors are internally coherent.

Coherent with education statistics

See below.

This part compares key R&D variables as preliminary and final data.

(1)    Calculate the average remuneration (cost) of individuals belonging to the internal R&D personnel, excluding those who are only formally ‘employees’ (university students, grant holders, etc.).

(2)    Calculate the average remuneration (cost) of individuals belonging to the external R&D personnel (FTEs/other current R&D costs for external R&D personnel).

The assessment of costs associated with a statistical product is a rather complicated task since there must exist a mechanism for appointing portions of shared costs (for instance shared IT resources and dissemination channels) and overheads (office space, utility bills etc). The assessment must become detailed and clear enough so that international comparisons among agencies of different structures are feasible. 

1)       The shares of the figures given in the first column that are accounted for by payments to private firms or other Government agencies.

1)        T = the time required to provide the information, including time spent assembling information prior to completing a form or taking part in interview and the time taken up by any subsequent contacts after receipt of the questionnaire (‘Re-contact time’)

Not requested.

Not requested.

Not requested.

Several separate activities are used for the collection of raw data or pre-compiled administrative data and statistics related to R&D. For simplicity, we call them surveys irrespective of whether they are sample surveys, censuses, collections of administrative data/pre-compiled statistics. This section presents the names of the surveys by sector of performance as well as methodological information for each survey. Depending on the type of survey and sector of performance, only the sections corresponding to that survey and sector are filled in.

See 12.3.3.

See below.

To ensure the quality of statistical data, the statistical database is checked. The error protocol is checked, completeness of the entered statistical data is analyzed, and relationships between the indicators are analyzed. The check determines whether data meet mathematical and logical control conditions. After collecting all data, the data is checked again: a comparative analysis is performed between the data provided by respondents and information available from other sources, exceptions to the quantitative indicators are identified, the data set is compared with the previous period, inaccuracies are assessed. In case of deviations, reasons for them are explained and, if necessary, respondents are contacted. Data are corrected if inaccuracies are identified.

See below.

No imputation.

Not requested.

Not requested.