Hydrogen and Fuel-Cell Technologies for Road Transport
The overall objectives of HyTRAN are to advance the fuel-cell technology towards a commercially viable solution by developing components and a system. Two innovative integrated fuel-cell systems will be demonstrated:
- 80 kW direct hydrogen PEM fuel-cell system
- 5 kW APU diesel reformed gas PEM fuel-cell system.
Local and global environment issues, as well as the consumption and supply of energy, are major challenges for the future. A fuel cell is an ideal device to generate electricity from either fossil or renewable fuels as it is clean and efficient. By using fuel-cell propulsion running on hydrogen, the vehicle has (local) zero emission. For a fuel cell with fuel-processing technology used for propulsion or auxiliary power units (APU), major air pollutants will be substantially reduced. Hydrogen fuel cells are therefore increasingly seen as a potential propulsion technology of the future for road transport. Additionally, fuel-cell APUs – possibly coupled with on-board fuel reformers – are also seen as a promising technology for both light- and heavy-duty vehicles. However, despite the potential of these technologies to reduce the environmental impact of road transport and to improve energy efficiency, both technical and economic barriers need to be overcome for them to be successfully introduced into mass markets. Issues to work on are the fuel-cell stack, components and main subsystems including the fuel processor and auxiliary components, the fuel-cell system and the vehicle integration, as well as the choice of fuel with its implications for technology and infrastructure.
The scope of the HyTRAN project is to advance the fuel-cell technology towards solutions that are commercially viable. This will be demonstrated in two fuel-cell systems. The components and sub-systems are considered as major bottlenecks for fuel cell-based vehicle systems. HyTRAN is therefore largely focused on the development of the necessary components and sub-systems to make them meet the actual requirements derived from the two applications.
The challenges deal with factors such as cost, durability, weight, volume and efficiency which all need to be improved. The project has compiled targets for all these factors, which have to be met for commercial products. Based on the commercial targets, project targets have been elaborated which would be a leap forward from today’s R&D status towards a commercial product. The plan to meet the project objectives leads to the development and innovation on both a component and system level. A multitude of components and subsystems will be developed and integrated into advanced systems, which will be tested and evaluated.
Description of work
The need for breakthroughs and innovations at the component level in order to meet the project objectives leads to the following developments within HyTRAN:
- innovative 80 kW direct hydrogen stack with strong weight and volume reduction, increased efficiency, durability and start-up time, and with innovative MEAs
- 5 kW reformate fuel-cell stack: work on innovative electro-catalyst and MEA elements, introducing novel catalysts and electrode structures
- innovative humidification/dehumidification apparatus
- heat exchanger and radiator customised for the application
- micro-structured diesel steam reformer and gas purification units.
To validate the progress towards these objectives, two corresponding technical platforms (TP) will be developed and used for assessment:
- TP1 – Powertrain: development of a compact system for traction power by an 80 kW direct hydrogen PEM fuel-cell system implemented in a passenger car
- TP2 – APU: development of a compact 5 kW auxiliary power unit for both light-duty and heavy-duty vehicles, including micro-structured diesel oil steam reformer, clean-up reactors, reformate hydrogen stack and balance of plant components.
In general, the first three years of the project will be mainly devoted to the development of innovative components to widen the technology. The last two years will then focus on the integration of these components into subsystems, including tests and preparation for implementation into vehicles.
During the first year, the main events for developing the hydrogen fuel-cell platform were stack design, characterising tests, air supply, water and thermal management studies. This work focused on the definition of the specification that could make the realisation of a scalable FC system possible, considering the required characteristics of efficiency and compactness. These activities later resulted in many key issues being identified and ‘frozen’. Major efforts have been focused on testing the stack on sensitivity, cycles and durability.
Continued activities have been devoted to developing the key components and providing a viable system design for the diesel-fuelled FC APU system. During the second year, progressive development of the fuel processor, which is a vital part of the APU system, has been made. Catalysts are now available for each stage of the reforming and CO clean-up system, and have been matched to the operating conditions identified from the system modelling activities. Prototype micro-channel plate reactors and fuel and water vaporisers have been designed, constructed and successfully tested.
- Related Info
- Acronym: HyTRAN
- Name of proposal: Hydrogen and Fuel-Cell Technologies for Road Transport
- Contract number: TIP3-CT-2003-502577
- Instrument: IP
- Total cost: 16,790,538 €
- EU contribution: 8,811,143 €
- Call: FP6-2002-Transport 1
- Starting date: 01/01/2004
- Ending date: 31/12/2008
- Duration: 60 months
- Sector: Road
- Objective: New Technologies and Concepts for all Surface Transport Modes (Road, Rail and Waterborne)
- Research domain: Development of zero or near-zero emission propulsion (Hydrogen, fuel cells, electric vehicles)
- Coordinator: Mr Ekdunge Per Volvo Technology Corporation Chalmers Science Park SE 40508 Gothenburg
- E-mail: firstname.lastname@example.org
- Tel: +46 (0)31 772 4016
- Fax: +46 (0)31 772 4070
- Centro Ricerche Fiat S.c.p.a. IT
- REGIENOV (Renault Recherche Innovation acting on behalf of Renault and its subsidiaries) FR
- Volkswagen AG DE
- DaimlerChrysler AG DE
- DAF Trucks NV NL
- Nuvera Fuel Cells Europe SRL IT
- Johnson Matthey Fuel Cells Ltd UK
- OPCON AUTOROTOR AB SE
- GILLET GMBH DE
- Weidmann Plastics Technology AG CH
- ADROP FEUCHTEMESSTECHNIK GMBH DE
- Rheinisch-Westfälische Technische Hochschule Aachen (RWTH) DE
- Energieonderzoek Centrum Nederland NL
- Politecnico di Torino IT
- Paul Scherrer Institut CH
- INSTITUT FUER MIKROTECHNIK MAINZ GM... DE
- Imperial College of Science, Technology and Medicine UK
- Environment Park S.A. IT