TOPIC : Integration of unconventional technologies for multi-material processing into manufacturing systems
|Publication date:||14 October 2015|
|Types of action:||RIA Research and Innovation action|
|DeadlineModel: Opening date:||single-stage 20 September 2016||Deadline:||19 January 2017 17:00:00|
|Time Zone : (Brussels time)|
Topic DescriptionSpecific Challenge:
The competitiveness of European manufacturing depends on producing differentiated and high added value products in an efficient and sustainable manner, with reduced production costs, increased product quality and minimised time to market. Multi-material products have the advantage of putting the right material in the right place to satisfy all the expected requirements, which is particularly relevant when high cost or critical materials are involved. The aim of this topic is to integrate unconventional manufacturing technologies within a specific set (water jet, ultrasonic and micro-wave, electron beam welding and/or electro discharge machining, laser and photopolymerisation) into a manufacturing system to make multi-material products composed of high cost or critical materials with a prolonged service life. These innovative manufacturing concepts and technologies can help European industry to face the challenge of improving resource efficiency and sustainability.
The integration of the above-mentioned unconventional manufacturing technologies into the process chain may be complemented with processes such as thermal treatment, in-process inspection and control, stress-relieving, micro-structural improvements, machining and joining. Successful integration will help to achieve a breakthrough in innovative manufacturing approaches for multi-material products. The major challenge lies in reinforcing the integration of these unconventional processes into manufacturing systems for multi-material products and subsequently implementing them throughout the European manufacturing sector, as well as ensuring that the disassembly of the materials is possible to enable re-use and recycling.Scope:
The proposal should use one or more of the following unconventional manufacturing technologies (water jet, ultrasonic and micro-wave, electron beam welding and/or electro discharge machining, laser and photopolymerisation) to create new manufacturing systems for multi-material products. To tackle this major challenge successfully, research will need to cover all of the following areas:
- innovative process chains for high cost or critical multi-material products based on unconventional technologies, integrated if appropriate with more conventional manufacturing techniques such as machining and joining;
- manufacturing processes capable of generating the features and geometries required for multi-material products as well as integrating additional improvements such as thermal treatment, stress relieving, surface hardening, corrosion resistance or micro-structural improvements;
- new flexible machinery concepts and components to allow the integration of unconventional technologies and processes into industrial manufacturing systems able to handle a range of material combinations and products;
- in-process inspection and control to ensure quality requirements within the innovative process chains.
Activities are expected to focus on Technology Readiness Levels 4 to 6. This topic addresses cross-KET activities.
This topic is particularly suitable for SMEs.
The Commission considers that proposals requesting a contribution from the EU between EUR 3 and 5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.Expected Impact:
The developed new technologies should lead to a remarkable impact in the following terms:
- Reduction of at least 10% in the production time through the integration of operations and the reduction of idling time between manufacturing steps.
- Reduction of at least 15% in the production cost through process integration and improved manufacturing quality.
- Resource efficiency improved by reducing the use of raw materials and energy consumption by at least 10%.
- Strengthened global position of European manufacturing industry through the intensive implementation of innovative and unconventional technologies along the European manufacturing value chain.
- Low capital investment solutions available for SME uptake.
Proposals should include a business case and exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.Cross-cutting Priorities:
Topic conditions and documents
Please read carefully all provisions below before the preparation of your application.
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
- ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
3.1 Evaluation criteria and procedure, scoring and threshold:
The criteria, scoring and threshold are described in General Annex H of the work programme.
The following exceptions apply:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
The procedure for setting a priority order for proposals with the same score is given in General Annex H of the work programme. The following exceptions apply:
Under 3 (a)
Proposals are first ranked in separate lists according to the topics against which they were submitted (‘topic ranked lists’). When comparing ex aequo proposals from different topics, proposals having a higher position in their respective 'topic ranked list' will be considered to have a higher priority in the overall ranked list.
Under 3 (b)
For all topics and types of action, the prioritisation will be done first on the basis of the score for Impact, and then on that for Excellence.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
- INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT
Information on the outcome of single-stage evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
- PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
for the type of action under this topic
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
- ADDITIONAL PROVISIONS
Horizon 2020 budget flexibility
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
- OPEN ACCESS
Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
- Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs.
- Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
- ADDITIONAL DOCUMENTS
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)
H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
No submission system is open for this topic.
National Contact Points (NCP) - contact your NCP for further assistance.
Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.
Partner Search Services help you find a partner organisation for your proposal
Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.
H2020 Online Manual your online guide on the procedures from proposal submission to managing your grant.
Participant Portal FAQ – Submission of proposals.
IT Helpdesk- contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.
European IPR Helpdesk assists you on intellectual property issues