Research & Innovation - Participant Portal

Search

TOPIC : Methods to remove hazardous substances and contaminants from secondary raw materials

Topic identifier: CE-SC5-01-2018
Publication date: 27 October 2017
Focus area: Connecting economic and environmental gains - the Circular Economy (CE)

Types of action: RIA Research and Innovation action
DeadlineModel:
Opening date:
two-stage
07 November 2017
Deadline:
2nd stage Deadline:
27 February 2018 17:00:00
04 September 2018 17:00:00

Time Zone : (Brussels time)
  Horizon 2020 H2020 website
Pillar: Societal Challenges
Work Programme Year: H2020-2018-2020
Topic Description
Specific Challenge:

Reuse and recycling of many secondary raw materials continues to be low in the EU, while landfill and incineration rates remain high. The uptake and recyclability of secondary raw materials can be hampered by the presence of undesirable contaminants, additives and even substances of concern. The removal of such undesirable substances could improve the purity of the resulting secondary raw material and mitigate potential health and environmental concerns. In addition, the removal of these substances could increase the range of potential recycling and reuse applications for the secondary raw materials.

Scope:

Actions should develop innovative solutions for removing undesirable substances from secondary raw materials. The substances in question could be those posing health or environmental risks and/or those whose presence could adversely affect the quality of the secondary raw material. The safe utilisation or disposal of substances thus removed should be addressed as well. Proposals are expected to provide evidence of the potential market impact that the proposed solutions could bring, including quantitative information on the size of the targeted market. The economic feasibility and overall environmental performance of the proposed solution should also be considered. The work should also produce recommendations on the design and manufacturing of materials for recyclability and for standardisation. Actions should be tackled by a multidisciplinary consortium, with significant participation of industry partners and recyclers. Participation of SMEs is desirable. Activities are expected to achieve TRL 5-6 by the end of the project.

The Commission considers that proposals requesting a contribution from the EU of between EUR 3 million and EUR 5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Expected Impact:

The project results are expected to contribute to:

  • increased purity and/or desirable quality of secondary raw materials;
  • an increased recycling rate for, and reduced landfill and incineration of, secondary raw materials;
  • reduced risk of retaining hazardous substances in recycled materials, where relevant;
  • the implementation of the EU Circular Economy Action Plan and the 7th Environment Action Programme;
  • the Commission Strategy on Plastics in a Circular Economy[1] and to the implementation of the SPIRE PPP Roadmap, where relevant.
Cross-cutting Priorities:

Contractual Public-Private Partnerships (cPPPs)
SPIRE
Open Innovation

[1]currently in preparation

Topic conditions and documents

1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.

 

2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme.

Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.

3. Evaluation:

  • Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.  
  • Submission and evaluation processes are described in the Online Manual.

4. Indicative time for evaluation and grant agreements:

Information on the outcome of evaluation (two-stage call):
For stage 1: maximum 3 months from the deadline for submission.
For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.

5. Proposal templates, evaluation forms and model grant agreements (MGA):

Research and Innovation Action:

Specific provisions and funding rates
Proposal templates are available after entering the submission link below.
Standard evaluation form
General MGA - Multi-Beneficiary
Annotated Grant Agreement

6. Additional provisions:

Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply

Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.

7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.

Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.

Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.

Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.

Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.

Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.

Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.

The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.

8. Additional documents:

1. Introduction WP 2018-20
12. Climate action, environment, resource efficiency and raw materials WP 2018-20
18. Dissemination, Exploitation and Evaluation WP 2018-20

General annexes to the Work Programme 2018-2020

Legal basis: Horizon 2020 Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme

Submission Service

To access the Electronic Submission Service of the topic, please select the type of action that is most relevant to your proposal from the list below and click on the 'Start Submission' button. You will then be asked to confirm your choice of the type of action and topic, as these cannot be changed in the submission system. Upon confirmation you will be linked to the correct entry point.

To access existing draft proposals for this topic, please login to the Participant Portal and select the My Proposals page of the My Area section.

Type of Action Research and Innovation action [RIA]
Topic Methods to remove hazardous substances and contaminants from secondary raw materials - CE-SC5-01-2018
Guidance on proposal submission: H2020 online manual
IT Guidance: IT help

Get support

H2020 Online Manual is your guide on the procedures from proposal submission to managing your grant.

Participant Portal FAQ – Submission of proposals.

National Contact Points (NCP) - contact your NCP for further assistance in your national language(s).

Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.

Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.

IT Helpdesk - contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.

Ethics – for compliance with ethical issues, see the Online Manual and Science and Society Portal

European IPR Helpdesk assists you on intellectual property issues

CEN and CENELEC, the European Standards Organisations, advise you how to tackle standardisation in your project proposal. Contact CEN-CENELEC Research Helpdesk at research@cencenelec.eu

The European Charter for Researchers and the Code of Conduct for their recruitment

Partner Search Services help you find a partner organisation for your proposal.