Research & Innovation - Participant Portal

TOPIC : New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures

Topic identifier: EEB-04-2016
Publication date: 14 October 2015

Types of action: RIA Research and Innovation action
DeadlineModel:
Opening date:
single-stage
15 October 2015
Deadline: 21 January 2016 17:00:00

Time Zone : (Brussels time)
  Horizon 2020 H2020 website
Pillar: Industrial Leadership
Work Programme Year: H2020-2016-2017
Topic Description
Specific Challenge:

As a consequence of economic development, construction and demolition waste (CDW) has become a serious problem, creating serious environmental pollution in certain areas of the world. In the EU, CDW accounts for approximately 25% - 30% of all waste generated and consists of numerous materials, many of which can be recycled.

Advanced research actions and technical solutions are required for large-scale reuse and recycling of construction materials in building refurbishment, contributing to overall CO2 and energy reduction. At the same time pre-fabricated components are now commonly used in the construction sector not just to reduce costs but also to facilitate installation/dismantling and re-use of components.

The development of pre-fabricated elements containing a high share of recycled materials and of energy-efficient building concepts considering a high fraction of material replacement is needed. The main focus would be on the recovery/ recycling of materials that have the highest technical and economic interest and which are associated to refurbishment or demolition processes.

At the same time, the possibility to reuse different materials in energy-efficient buildings should be further investigated through a proper characterisation of their properties. Also the development of processes for easy disassembly needs to be considered as well as the need to address strict regulations and standards (eg. anti-seismic) in several European regions.

The EC Waste Directive mentions under Art 11- 2b that: "by 2020, the preparing for re-use, recycling and other material recovery, including backfilling operations using waste to substitute other materials, of non-hazardous construction and demolition waste excluding naturally occurring material defined in category 17 05 04 in the list of waste shall be increased to a minimum of 70 % by weight."

Scope:

Energy-efficient building concepts using new or adapted prefabricated components need to be developed, in order to implement construction processes allowing the reuse and recycling of different materials and structures while reducing energy use and minimising environmental impacts.

In the case of building retrofitting with traditional construction methods poor results are frequently obtained. Recent developments show that even with new constructions the use of recycled materials is still a challenge when prefabrication is concerned. There is a need to address material flows (on-site and off-site processes) and harmonize the way to acquire and use all the information related to the building and its stakeholders (procurers, builders, owners, users, operators, etc.) in order to radically modify the construction processes (e.g. lean construction and higher degree of industrial building prefabrication), and the off-site production of components (e.g. prefabricated components).

Proposals should cover the following areas:

  • Optimisation of recyclability properties of the materials and development of solutions to recycle and reuse construction materials and existing building structures in particular through the uptake by the manufacturing chain.
  • Innovative pre-fabricated elements solutions integrating the latest developments in recycling and reuse of CDW as well as in construction and installation processes which show clear evidence of technical and economic viability for structural and non-structural components with a life-cycle perspective.

The project should also address the demonstration of the recycling technologies in the construction or refurbishment of energy-efficient buildings representative of at least two different climatic zones across Europe, allowing for a high replication potential.

Activities are expected to focus on Technology Readiness Levels 4 to 6.

This topic is particularly suitable for SMEs.

The Commission considers that proposals requesting a contribution from the EU between EUR 3 and 5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Expected Impact:
  • CO2 savings (by min. 30 %), energy savings (by min 20%), and higher resource efficiency (minimum share of recycled materials in final product of at least 10-15 %) will ultimately contribute to a resource-efficient and climate change resilient economy.
  • Creation of new value chains by expanding the size and attractiveness of CDW recycling and reuse for energy-efficient buildings construction and refurbishment, properly tackling non-technological barriers.
  • High replication potential of the solutions obtained, with the possibility to export EU technology worldwide.
  • Contribution to achieving the objectives of the European Innovation Partnership on Raw Materials, in particular to the relevant impacts shown in Action I.5 "Recycling of raw materials from products, buildings and infrastructure" of the Strategic Implementation Plan[1].

Proposals should include a business case and exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.

[1]https://ec.europa.eu/eip/raw-materials/en/content/strategic-implementation-plan-part-ii#I.5%20Recycling

Topic conditions and documents

Please read carefully all provisions below before the preparation of your application.
 

  1. LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING:
    described in part A of the General Annexes of the General Work Programme.

    Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects
    (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).

     
  2. ELIGIBILITY and ADMISSIBILITY CONDITIONS:
    described in part B and C of the General Annexes of the General Work Programme

    Proposal page limits and layout: Please refer to Part B of the standard proposal template.

     
  3. EVALUATION

    3.1  Evaluation criteria and procedure, scoring and threshold:
    described in part H of the General Annexes of the General Work Programme , with the following exceptions:

    For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4.
    The overall threshold, applying to the sum of the three individual scores, will be 12.

    In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.

    In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except, when comparing ex aequo proposals of different topics, the proposals will be ranked first according to the position in the topic ranked lists


    3.2 Submission and evaluation process: Guide to the submission and evaluation process

          
  4. INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT:

    Information on the outcome of single-stage evaluation: maximum 5 months from the deadline for submission.
    Signature of grant agreements: maximum 8 months from the deadline for submission.
     
     
  5. PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
    for the type of action under this topic:


    Research and Innovation Action:

    Specific provisions and funding rates
    Standard proposal template
    Standard evaluation form
    H2020 General MGA -Multi-Beneficiary
    Annotated Grant Agreement

     
  6. ADDITIONAL PROVISIONS:

    Horizon 2020 budget flexibility

    Classified information

    Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.

    Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.

     
  7. OPEN ACCESS
    must be granted to all scientific publications resulting from Horizon 2020 actions,
    and proposals must refer to measures envisaged. 


    Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
     
  8. ADDITIONAL DOCUMENTS

    Legal basis: Horizon 2020 - Regulation of Establishment

    Legal basis: Horizon 2020 Rules for Participation


    Legal basis: Horizon 2020 Specific Programme

    H2020 Work Programme 2016-17: Introduction

    H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)


    H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology

    H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)


    H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation


    H2020 Work Programme 2016-17: General Annexes
Additional documents

Download all documents
(EN only, incl. the additional docs.)

  • 2016 FLASH CALL INFO en

Submission Service

No submission system is open for this topic.

Get support

ASSISTANCE

National Contact Points (NCP) - contact your NCP for further assistance.

Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.

Partner Search Services help you find a partner organisation for your proposal


HELPDESK

Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.

H2020 Online Manual your online guide on the procedures from proposal submission to managing your grant.

Participant Portal FAQ – Submission of proposals.

IT Helpdesk- contact the Participant Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.

European IPR Helpdesk assists you on intellectual property issues

 

MORE

Ethics – for compliance with ethical issues, see the Participant Portal and Science and Society Portal

CEN
and CENELEC, the European Standards Organisations, advise you how to tackle standardisation in your project proposal. Contact CEN-CENELEC Research Helpdesk at research@cencenelec.eu.

The European Charter for Researchers and the Code of Conduct for their recruitment