Growth

Electromagnetic compatibility (EMC)

Electromagnetic compatibility (EMC)

Directive 2014/30/EU

Short name:

Electromagnetic Compatibility (EMC)

Base:

Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast). Applicable from 20 April 2016.
OJ L 96, 29 March 2014

Directive repealed (applicable until 20 April 2016):

Directive 2004/108/EC relating to electromagnetic compatibility and repealing Directive 89/336/EEC
OJ L 390 of 31 December 2004

Modification:

[-]

Guide for application:

Commission contact point:

Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs
Ms Dorota Papiewska, Tel +32 2 295 2766
Email
Webpage for electrical and electronic engineering industries

For information about the content and availability of European standards, please contact the European Standardisation Organisations.

Publication of references of harmonised standards on electromagnetic compatibility in the Official Journal under:

Directive 2004/108/EC

Commission communication in the framework of the implementation of Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC - OJ C 014 of 16/01/2015
BG CS DA DE EL EN ES ET FI FR HR HU IT LT LV MT NL PL PT RO SK SL SV PDF Format

(This list replaces all the previous lists published in the Official Journal).
 

Directive 2014/30/EU - view the list under the section 'Publications in the Official Journal' below. 

 

 

Publications in the Official Journal:

  • Commission communication in the framework of the implementation of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) - OJ C 293 of 12/08/2016
    BG CS DA DE EL EN ES ET FI FR HR HU IT LT LV MT NL PL PT RO SK SL SV PDF Format
    (This list replaces all the previous lists published in the Official Journal.)


  • Stay up to date with the references of harmonised standards for this Directive, published in the Official Journal by subscribing to the RSS feed  RSS

    Summary list of titles and references harmonised standards under Directive 2014/30/EU for Electromagnetic compatibility (EMC)

    The summary list hereunder is a compilation of the references of harmonised standards which have been generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the publication of the references of harmonised standards in the Official Journal of the European Union.
    Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal gives legal effect.

     

    (Publication of titles and references of harmonised standards under Union harmonisation legislation)

    ESO (1)

    Reference and title of the standard
    (and reference document)

    First publication OJ

    Reference of superseded standard

    Date of cessation of presumption of conformity of superseded standard
    Note 1

    CEN

    EN 617:2001+A1:2010

    Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

    13/05/2016 

     

     

    CEN

    EN 618:2002+A1:2010

    Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

    13/05/2016 

     

     

    CEN

    EN 619:2002+A1:2010

    Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

    13/05/2016 

     

     

    CEN

    EN 620:2002+A1:2010

    Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

    13/05/2016 

     

     

    CEN

    EN 1155:1997

    Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods

    13/05/2016 

     

     

    EN 1155:1997/A1:2002

    13/05/2016 

    Note 3 

     

    CEN

    EN 12015:2014

    Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission

    13/05/2016 

     

     

    CEN

    EN 12016:2013

    Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

    13/05/2016 

     

     

    CEN

    EN 13241-1:2003+A1:2011

    Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

    13/05/2016 

     

     

    CEN

    EN 13309:2010

    Construction machinery - Electromagnetic compatibility of machines with internal power supply

    13/05/2016 

     

     

    CEN

    EN 14010:2003+A1:2009

    Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

    13/05/2016 

     

     

    CEN

    EN ISO 14982:2009

    Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

    13/05/2016 

     

     

    CEN

    EN 16361:2013

    Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics

    13/05/2016 

     

     

    Cenelec

    EN 50065-1:2011

    Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances

    13/05/2016 

     

     

    Cenelec

    EN 50065-2-1:2003

    Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

    13/05/2016 

     

     

    EN 50065-2-1:2003/AC:2003

    13/05/2016 

     

     

    EN 50065-2-1:2003/A1:2005

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 50065-2-2:2003

    Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

    13/05/2016 

     

     

    EN 50065-2-2:2003/A1:2005

    13/05/2016 

    Note 3 

     

    EN 50065-2-2:2003/AC:2003

    13/05/2016 

     

     

    EN 50065-2-2:2003/A1:2005/AC:2006

    13/05/2016 

     

     

    Cenelec

    EN 50065-2-3:2003

    Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

    13/05/2016 

     

     

    EN 50065-2-3:2003/A1:2005

    13/05/2016 

    Note 3 

     

    EN 50065-2-3:2003/AC:2003

    13/05/2016 

     

     

    Cenelec

    EN 50083-2:2012

    Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

    13/05/2016 

     

     

    Cenelec

    EN 50121-1:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 1: General

    This is the first publication 

     

     

    EN 50121-1:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50121-2:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

    This is the first publication 

     

     

    EN 50121-2:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50121-3-1:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

    This is the first publication 

     

     

    EN 50121-3-1:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50121-3-2:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

    This is the first publication 

     

     

    EN 50121-3-2:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50121-4:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

    This is the first publication 

     

     

    EN 50121-4:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50121-5:2006 (new)

    Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

    This is the first publication 

     

     

    EN 50121-5:2006/AC:2008 (new)

    This is the first publication 

     

     

    Cenelec

    EN 50130-4:2011

    Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

    13/05/2016 

     

     

    Cenelec

    EN 50148:1995

    Electronic taximeters

    13/05/2016 

     

     

    Cenelec

    EN 50270:2006 (new)

    Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

    This is the first publication 

     

     

    Cenelec

    EN 50293:2012

    Road traffic signal systems - Electromagnetic compatibility

    13/05/2016 

     

     

    Cenelec

    EN 50370-1:2005

    Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission

    13/05/2016 

     

     

    Cenelec

    EN 50370-2:2003

    Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity

    13/05/2016 

     

     

    Cenelec

    EN 50412-2-1:2005

    Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements

    13/05/2016 

     

     

    EN 50412-2-1:2005/AC:2009

    13/05/2016 

     

     

    Cenelec

    EN 50428:2005

    Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

    13/05/2016 

     

     

    EN 50428:2005/A1:2007

    13/05/2016 

    Note 3 

     

    EN 50428:2005/A2:2009

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 50470-1:2006

    Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
    IEC 62052-11:2003 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 50490:2008

    Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps

    13/05/2016 

     

     

    Cenelec

    EN 50491-5-1:2010

    General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

    13/05/2016 

     

     

    Cenelec

    EN 50491-5-2:2010

    General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment

    13/05/2016 

     

     

    Cenelec

    EN 50491-5-3:2010

    General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment

    13/05/2016 

     

     

    Cenelec

    EN 50498:2010

    Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles

    13/05/2016 

     

     

    Cenelec

    EN 50512:2009

    Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)

    13/05/2016 

     

     

    Cenelec

    EN 50529-1:2010

    EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires

    13/05/2016 

     

     

    Cenelec

    EN 50529-2:2010

    EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables

    13/05/2016 

     

     

    Cenelec

    EN 50550:2011

    Power frequency overvoltage protective device for household and similar applications (POP)

    13/05/2016 

     

     

    EN 50550:2011/AC:2012

    13/05/2016 

     

     

    EN 50550:2011/A1:2014

    13/05/2016 

    Note 3 

    28/07/2017 

    Cenelec

    EN 50557:2011

    Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses

    13/05/2016 

     

     

    Cenelec

    EN 50561-1:2013

    Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use

    13/05/2016 

    EN 55022:2010
    EN 55032:2012


    Note 2.1 

    09/10/2016 

    Cenelec

    EN 55011:2009

    Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
    CISPR 11:2009 (Modified)

    13/05/2016 

     

     

    EN 55011:2009/A1:2010
    CISPR 11:2009/A1:2010

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 55012:2007

    Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
    CISPR 12:2007

    13/05/2016 

     

     

    EN 55012:2007/A1:2009
    CISPR 12:2007/A1:2009

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 55014-1:2006

    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    CISPR 14-1:2005

    13/05/2016 

     

     

    EN 55014-1:2006/A2:2011
    CISPR 14-1:2005/A2:2011

    13/05/2016 

    Note 3 

     

    EN 55014-1:2006/A1:2009
    CISPR 14-1:2005/A1:2008

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 55014-2:1997 (new)

    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
    CISPR 14-2:1997

    This is the first publication 

     

     

    EN 55014-2:1997/A2:2008
    CISPR 14-2:1997/A2:2008 (new)

    This is the first publication 

    Note 3 

     

    EN 55014-2:1997/AC:1997 (new)

    This is the first publication 

     

     

    EN 55014-2:1997/A1:2001
    CISPR 14-2:1997/A1:2001 (new)

    This is the first publication 

    Note 3 

     

    Cenelec

    EN 55015:2006 (new)

    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    CISPR 15:2005

    This is the first publication 

     

     

    EN 55015:2006/A2:2009
    CISPR 15:2005/A2:2008 (new)

    This is the first publication 

    Note 3 

     

    EN 55015:2006/A1:2007
    CISPR 15:2005/A1:2006 (new)

    This is the first publication 

    Note 3 

     

    Cenelec

    EN 55015:2013

    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    CISPR 15:2013 + IS1:2013 + IS2:2013

    13/05/2016 

    EN 55015:2006
    + A1:2007
    + A2:2009

    Note 2.1 

    12/06/2016 

    Cenelec

    EN 55022:2010 (new)

    Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    CISPR 22:2008 (Modified)

    This is the first publication 

     

     

    EN 55022:2010/AC:2011 (new)

    This is the first publication 

     

     

    Cenelec

    EN 55024:2010

    Information technology equipment - Immunity characteristics - Limits and methods of measurement
    CISPR 24:2010

    13/05/2016 

     

     

    Cenelec

    EN 55032:2012 (new)

    Electromagnetic compatibility of multimedia equipment - Emission requirements
    CISPR 32:2012

    This is the first publication 

    EN 55022:2010
    EN 55103-1:2009# + A1:2012


    Note 2.1 

    05/03/2017 

    EN 55032:2012/AC:2013 (new)

    This is the first publication 

     

     

    Cenelec

    EN 55103-1:2009 (new)

    Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions

    This is the first publication 

     

     

    EN 55103-1:2009/A1:2012 (new)

    This is the first publication 

    Note 3 

     

    Cenelec

    EN 55103-2:2009

    Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

    13/05/2016 

     

     

    Cenelec

    EN 60034-1:2010

    Rotating electrical machines - Part 1: Rating and performance
    IEC 60034-1:2010 (Modified)

    13/05/2016 

     

     

    EN 60034-1:2010/AC:2010

    13/05/2016 

     

     

    Cenelec

    EN 60204-31:2013

    Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
    IEC 60204-31:2013

    13/05/2016 

    EN 60204-31:1998

    Note 2.1 

    28/05/2016 

    Cenelec

    EN 60255-26:2013

    Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
    IEC 60255-26:2013

    13/05/2016 

     

     

    EN 60255-26:2013/AC:2013

    13/05/2016 

     

     

    Cenelec

    EN 60669-2-1:2004

    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012

    13/05/2016 

     

     

    EN 60669-2-1:2004/AC:2007

    13/05/2016 

     

     

    EN 60669-2-1:2004/A1:2009
    IEC 60669-2-1:2002/A1:2008 (Modified)

    13/05/2016 

    Note 3 

     

    EN 60669-2-1:2004/A12:2010

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60730-1:2011

    Automatic electrical controls for household and similar use - Part 1: General requirements
    IEC 60730-1:2010 (Modified)

    13/05/2016 

    EN 60730-1:2000
    + A12:2003
    + A13:2004
    + A14:2005
    + A16:2007
    + A1:2004
    + A2:2008

    Note 2.1 

    28/06/2016 

    Cenelec

    EN 60730-2-5:2002 (new)

    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
    IEC 60730-2-5:2000 (Modified)

    This is the first publication 

     

     

    EN 60730-2-5:2002/A11:2005 (new)

    This is the first publication 

    Note 3 

    01/12/2008 

    EN 60730-2-5:2002/A1:2004
    IEC 60730-2-5:2000/A1:2004 (Modified) (new)

    This is the first publication 

    Note 3 

    01/12/2008 

    EN 60730-2-5:2002/A2:2010
    IEC 60730-2-5:2000/A2:2008 (Modified) (new)

    This is the first publication 

    Note 3 

    01/03/2013 

    Cenelec

    EN 60730-2-6:2008 (new)

    Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
    IEC 60730-2-6:2007 (Modified)

    This is the first publication 

     

     

    Cenelec

    EN 60730-2-7:2010

    Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches
    IEC 60730-2-7:2008 (Modified)

    13/05/2016 

     

     

    EN 60730-2-7:2010/AC:2011

    13/05/2016 

     

     

    Cenelec

    EN 60730-2-8:2002

    Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
    IEC 60730-2-8:2000 (Modified)

    13/05/2016 

     

     

    EN 60730-2-8:2002/A1:2003
    IEC 60730-2-8:2000/A1:2002 (Modified)

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60730-2-9:2010

    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    IEC 60730-2-9:2008 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 60730-2-14:1997

    Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
    IEC 60730-2-14:1995 (Modified)

    13/05/2016 

     

     

    EN 60730-2-14:1997/A1:2001
    IEC 60730-2-14:1995/A1:2001

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60730-2-15:2010

    Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
    IEC 60730-2-15:2008 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 60870-2-1:1996

    Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
    IEC 60870-2-1:1995

    13/05/2016 

     

     

    Cenelec

    EN 60945:2002

    Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
    IEC 60945:2002

    13/05/2016 

     

     

    Cenelec

    EN 60947-1:2007

    Low-voltage switchgear and controlgear - Part 1: General rules
    IEC 60947-1:2007

    13/05/2016 

     

     

    EN 60947-1:2007/A2:2014
    IEC 60947-1:2007/A2:2014

    13/05/2016 

    Note 3 

    14/10/2017 

    EN 60947-1:2007/A1:2011
    IEC 60947-1:2007/A1:2010

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-2:2006

    Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    IEC 60947-2:2006

    13/05/2016 

     

     

    EN 60947-2:2006/A1:2009
    IEC 60947-2:2006/A1:2009

    13/05/2016 

    Note 3 

     

    EN 60947-2:2006/A2:2013
    IEC 60947-2:2006/A2:2013

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-3:2009

    Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 60947-3:2008

    13/05/2016 

     

     

    EN 60947-3:2009/A1:2012
    IEC 60947-3:2008/A1:2012

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-4-1:2010

    Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    IEC 60947-4-1:2009

    13/05/2016 

     

     

    EN 60947-4-1:2010/A1:2012
    IEC 60947-4-1:2009/A1:2012

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-4-2:2012

    Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
    IEC 60947-4-2:2011

    13/05/2016 

     

     

    Cenelec

    EN 60947-4-3:2014

    Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    IEC 60947-4-3:2014

    13/05/2016 

    EN 60947-4-3:2000
    + A1:2006
    + A2:2011

    Note 2.1 

    11/06/2017 

    Cenelec

    EN 60947-5-1:2004

    Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
    IEC 60947-5-1:2003

    13/05/2016 

     

     

    EN 60947-5-1:2004/AC:2005

    13/05/2016 

     

     

    EN 60947-5-1:2004/A1:2009
    IEC 60947-5-1:2003/A1:2009

    13/05/2016 

    Note 3 

     

    EN 60947-5-1:2004/AC:2004

    13/05/2016 

     

     

    Cenelec

    EN 60947-5-2:2007

    Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
    IEC 60947-5-2:2007

    13/05/2016 

     

     

    EN 60947-5-2:2007/A1:2012
    IEC 60947-5-2:2007/A1:2012

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-5-3:1999

    Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
    IEC 60947-5-3:1999

    13/05/2016 

     

     

    EN 60947-5-3:1999/A1:2005
    IEC 60947-5-3:1999/A1:2005

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-5-6:2000

    Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
    IEC 60947-5-6:1999

    13/05/2016 

     

     

    Cenelec

    EN 60947-5-7:2003

    Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
    IEC 60947-5-7:2003

    13/05/2016 

     

     

    Cenelec

    EN 60947-5-9:2007

    Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches
    IEC 60947-5-9:2006

    13/05/2016 

     

     

    Cenelec

    EN 60947-6-1:2005

    Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
    IEC 60947-6-1:2005

    13/05/2016 

     

     

    EN 60947-6-1:2005/A1:2014
    IEC 60947-6-1:2005/A1:2013

    13/05/2016 

    Note 3 

    17/01/2017 

    Cenelec

    EN 60947-6-2:2003

    Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    IEC 60947-6-2:2002

    13/05/2016 

     

     

    EN 60947-6-2:2003/A1:2007
    IEC 60947-6-2:2002/A1:2007

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60947-8:2003

    Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
    IEC 60947-8:2003

    13/05/2016 

     

     

    EN 60947-8:2003/A2:2012
    IEC 60947-8:2003/A2:2011

    13/05/2016 

    Note 3 

     

    EN 60947-8:2003/A1:2006
    IEC 60947-8:2003/A1:2006

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 60974-10:2014

    Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
    IEC 60974-10:2014

    13/05/2016 

    EN 60974-10:2007

    Note 2.1 

    13/03/2017 

    Cenelec

    EN 61000-3-2:2014

    Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
    IEC 61000-3-2:2014

    13/05/2016 

    EN 61000-3-2:2006
    + A1:2009
    + A2:2009

    Note 2.1 

    30/06/2017 

    Cenelec

    EN 61000-3-3:2013

    Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
    IEC 61000-3-3:2013

    13/05/2016 

    EN 61000-3-3:2008

    Note 2.1 

    18/06/2016 

    Cenelec

    EN 61000-3-11:2000

    Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
    IEC 61000-3-11:2000

    13/05/2016 

     

     

    Cenelec

    EN 61000-3-12:2011

    Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
    IEC 61000-3-12:2011 + IS1:2012

    13/05/2016 

     

     

    Cenelec

    EN 61000-6-1:2007

    Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
    IEC 61000-6-1:2005

    13/05/2016 

     

     

    Cenelec

    EN 61000-6-2:2005

    Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
    IEC 61000-6-2:2005

    13/05/2016 

     

     

    EN 61000-6-2:2005/AC:2005

    13/05/2016 

     

     

    Cenelec

    EN 61000-6-3:2007

    Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    IEC 61000-6-3:2006

    13/05/2016 

     

     

    EN 61000-6-3:2007/A1:2011
    IEC 61000-6-3:2006/A1:2010

    13/05/2016 

    Note 3 

     

    EN 61000-6-3:2007/A1:2011/AC:2012

    13/05/2016 

     

     

    Cenelec

    EN 61000-6-4:2007

    Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    IEC 61000-6-4:2006

    13/05/2016 

     

     

    EN 61000-6-4:2007/A1:2011
    IEC 61000-6-4:2006/A1:2010

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 61008-1:2012

    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    IEC 61008-1:2010 (Modified)

    13/05/2016 

    EN 61008-1:2004
    + A11:2007
    + A12:2009
    + A13:2012

    Note 2.1 

    18/06/2017 

    EN 61008-1:2012/A1:2014
    IEC 61008-1:2010/A1:2012 (Modified)

    13/05/2016 

    Note 3 

    04/08/2017 

    Cenelec

    EN 61009-1:2012

    Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
    IEC 61009-1:2010 (Modified)

    13/05/2016 

    EN 61009-1:2004
    + A11:2008
    + A12:2009
    + A13:2009
    + A14:2012

    Note 2.1 

    18/06/2017 

    Cenelec

    EN 61131-2:2007

    Programmable controllers - Part 2: Equipment requirements and tests
    IEC 61131-2:2007

    13/05/2016 

     

     

    Cenelec

    EN 61204-3:2000

    Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)
    IEC 61204-3:2000

    13/05/2016 

     

     

    Cenelec

    EN 61326-1:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
    IEC 61326-1:2012

    13/05/2016 

     

     

    Cenelec

    EN 61326-2-1:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
    IEC 61326-2-1:2012

    13/05/2016 

     

     

    Cenelec

    EN 61326-2-2:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
    IEC 61326-2-2:2012

    13/05/2016 

     

     

    Cenelec

    EN 61326-2-3:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
    IEC 61326-2-3:2012

    13/05/2016 

     

     

    Cenelec

    EN 61326-2-4:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
    IEC 61326-2-4:2012

    13/05/2016 

     

     

    Cenelec

    EN 61326-2-5:2013

    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
    IEC 61326-2-5:2012

    13/05/2016 

     

     

    Cenelec

    EN 61439-1:2011

    Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    IEC 61439-1:2011

    13/05/2016 

     

     

    EN 61439-1:2011 does not give presumption of conformity without another part of the standard.

    Cenelec

    EN 61439-2:2011

    Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
    IEC 61439-2:2011

    13/05/2016 

     

     

    Cenelec

    EN 61439-3:2012

    Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
    IEC 61439-3:2012

    13/05/2016 

     

     

    Cenelec

    EN 61439-4:2013

    Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
    IEC 61439-4:2012

    13/05/2016 

     

     

    Cenelec

    EN 61439-5:2011 (new)

    Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
    IEC 61439-5:2010

    This is the first publication 

     

     

    Cenelec

    EN 61439-6:2012

    Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
    IEC 61439-6:2012

    13/05/2016 

     

     

    Cenelec

    EN 61543:1995

    Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    IEC 61543:1995

    13/05/2016 

     

     

    EN 61543:1995/A2:2006
    IEC 61543:1995/A2:2005

    13/05/2016 

    Note 3 

     

    EN 61543:1995/A11:2003/AC:2004

    13/05/2016 

     

     

    EN 61543:1995/AC:1997

    13/05/2016 

     

     

    EN 61543:1995/A11:2003

    13/05/2016 

    Note 3 

     

    EN 61543:1995/A12:2005

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 61547:2009

    Equipment for general lighting purposes - EMC immunity requirements
    IEC 61547:2009 + IS1:2013

    13/05/2016 

     

     

    Cenelec

    EN 61557-12:2008

    Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
    IEC 61557-12:2007

    13/05/2016 

     

     

    Cenelec

    EN 61800-3:2004

    Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    IEC 61800-3:2004

    13/05/2016 

     

     

    EN 61800-3:2004/A1:2012
    IEC 61800-3:2004/A1:2011

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 61812-1:2011

    Time relays for industrial and residential use - Part 1: Requirements and tests
    IEC 61812-1:2011

    13/05/2016 

     

     

    Cenelec

    EN 62020:1998

    Electrical accessories - Residual current monitors for household and similar uses (RCMs)
    IEC 62020:1998

    13/05/2016 

     

     

    EN 62020:1998/A1:2005
    IEC 62020:1998/A1:2003 (Modified)

    13/05/2016 

    Note 3 

     

    Cenelec

    EN 62026-1:2007

    Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules
    IEC 62026-1:2007

    13/05/2016 

     

     

    EN 62026-1:2007 does not give presumption of conformity without another part of the standard.

    Cenelec

    EN 62026-2:2013

    Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
    IEC 62026-2:2008 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 62026-3:2009 (new)

    Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
    IEC 62026-3:2008

    This is the first publication 

     

     

    Cenelec

    EN 62026-7:2013

    Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
    IEC 62026-7:2010 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 62040-2:2006

    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    IEC 62
    IEC 62040-2:2005

    13/05/2016 

     

     

    EN 62040-2:2006/AC:2006

    13/05/2016 

     

     

    Cenelec

    EN 62052-11:2003

    Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
    IEC 62052-11:2003

    13/05/2016 

     

     

    EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.

    Cenelec

    EN 62052-21:2004

    Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
    IEC 62052-21:2004

    13/05/2016 

     

     

    EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.

    Cenelec

    EN 62053-11:2003

    Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
    IEC 62053-11:2003

    13/05/2016 

     

     

    Cenelec

    EN 62053-21:2003

    Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
    IEC 62053-21:2003

    13/05/2016 

     

     

    Cenelec

    EN 62053-22:2003

    Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
    IEC 62053-22:2003

    13/05/2016 

     

     

    Cenelec

    EN 62053-23:2003

    Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
    IEC 62053-23:2003

    13/05/2016 

     

     

    Cenelec

    EN 62054-11:2004

    Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
    IEC 62054-11:2004

    13/05/2016 

     

     

    Cenelec

    EN 62054-21:2004

    Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
    IEC 62054-21:2004

    13/05/2016 

     

     

    Cenelec

    EN 62135-2:2008 (new)

    Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
    IEC 62135-2:2007

    This is the first publication 

     

     

    Cenelec

    EN 62310-2:2007

    Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements
    IEC 62310-2:2006 (Modified)

    13/05/2016 

     

     

    Cenelec

    EN 62423:2012

    Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
    IEC 62423:2009 (Modified)

    13/05/2016 

    EN 62423:2009

    Note 2.1 

    19/06/2017 

    Cenelec

    EN 62586-1:2014

    Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
    IEC 62586-1:2013

    13/05/2016 

     

     

    Cenelec

    EN 62586-2:2014

    Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
    IEC 62586-2:2013

    13/05/2016 

     

     

    Cenelec

    EN 62606:2013

    General requirements for arc fault detection devices
    IEC
    IEC 62606:2013 (Modified)

    13/05/2016 

     

     

    ETSI

    EN 300 386 V1.6.1

    Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

    13/05/2016 

     

     

    ETSI

    EN 301 489-1 V1.9.2

    Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

    13/05/2016 

     

     

    ETSI

    EN 301 489-34 V1.4.1

    Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

    13/05/2016 

     

     

     

    (1) ESO: European standardisation organisation:

    CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu)

    CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu)

    ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

     

    Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

    Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

    Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

    Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

    Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

     

    Share