Logo LIFE

ELVISUSTECH - End life vehicles: innovative and sustainable technology for chieving European Directive targets

LIFE09 ENV/ES/000460


Project description   Environmental issues   Beneficiaries   Administrative data   Read more   Print   PDF version  
 

Contact details:

Project Manager: Carles PEREZ
Tel: +34 938 055388
Fax: +34 938 050618
Email: cperez@leitat.org



Project description:

Background

Recycling rates in the EU are increasing, in part thanks to the End-of-Life Vehicles (ELV) and the Waste Electrical and Electronic Equipment (WEEE) Directives (2000/53/CE and 2002/96/CE). Today, more than 85% of ELV materials have to be recycled; the next step is to reach a 95% recycling rate by 2015. However, Europe produces 12 million tonnes/year of electrical and electronic waste and more than14 million vehicles/year reach the end of their useful life. Recycling technologies moreover still have room for improvement in order to achieve the targets set in the WEEE and ELV directives. For instance, problems persist in the treatment of dark plastics, rubber and difficult input materials such as light shredded fractions.


Objectives

In order to solve the troubles detected with dark plastics, rubber and other difficult material, the project would develop an innovative sorting unit for end-of -life vehicles in order to increase the recycling rate and to promote the reuse or valorisation of different components from shredder waste. The project also aimed to:

  • Reduce the amount of solid waste from the automotive and electronic-electric sectors that is disposed in landfills;
  • Use an alternative energy source to separate waste that it is not reusable or that cannot be valorised; and
  • Use suitable residues for energy generation and develop potential new markets and uses for others.
  • The sorting unit designed by the project would also reduce management costs from waste disposal to landfills and contribute to improved lifecycle maintenance for vehicles and electronic and electrical goods.


    Results

    The ELVISUSTECH project designed and constructed a prototype that is able to separate ELV waste with more precision than the current mechanical systems. The main sensors used at the pilot plant are a magnet, an eddy current and inductive sensors. The settings and geometric arrangements of the inductive sensors was particularly innovative and produced great results.

    The results obtained show that the prototype is able to treat the ‘Fluff’ (a waste fraction that is nowadays sent to landfill) and break it down valuable parts: ones contains ferrous metals; another non-ferrous metals such as copper and aluminium, and the last one contains a mixture of plastics. This last fraction is used to produce high quality WDF (waste derived fuel) that can be used in cement kilns.

    This technology will be implemented on a full scale at the recycling site in Fragnor, and is expected to reduce up to a 50% the current landfill disposal, increasing the percentage of ELV material being recycled from 80% to 91%. Including the materials removed before fragmentation (wheels, batteries, etc.) the recycling rate will permit the company to fulfil with the requirements of the European Directives foreseen for 2015 – i.e. 95%. Additionally, this process is economically viable and can be installed in a plant, either to complement the existing equipment or to substitute the current one. Moreover, the plant configuration is sufficiently flexible to be able to treat other types of residues.

    Further information on the project can be found in the project's layman report and After-LIFE Communication Plan (see "Read more" section).


    Top


Environmental issues addressed:

Themes

Waste - End-of-Life Vehicles (ELV's) and tyres


Keywords

vehicle‚  waste management


Target EU Legislation

  • Waste
  • Directive 2000/53 - End-of life vehicles (18.09.2000)

Natura 2000 sites

Not applicable


Top


Beneficiaries:

Coordinator LEITAT
Type of organisation Professional organisation
Description Asociación de Investigación de las Industrias del Curtido y Anexas (AIICA), is a non-profit research centre founded in 1962. It is divided into three main areas: an analytical laboratory; an experimental plant with a tannery pilot plant, a complete water treatment pilot plant and a paper pilot plant (located in the building but belonging to the city’s Industrial Engineering University); and a training area.
Partners Inserma Anoia S.L., Spain Automatització i Mecanització DJS S.L., Spain Consell General Càmbres de Comerç de Catalunya, Spain FRAGNOR S.L., Spain Acondicionamiento Tarrasense, Spain

Top




Project reference LIFE09 ENV/ES/000460
Duration 01-OCT-2010 to 31-MAR -2013
Total budget 1,972,942.00 €
EU contribution 964,595.00 €
Project location Cataluña(España)

Top


Read more:

Project web site Project's website
Publication: After-LIFE Communication Plan After-LIFE Communication Plan
Publication: Layman report Layman report
Publication: Technical report Project's Final technical report
Video link Link to the project's video (6'20")

Top

Project description   Environmental issues   Beneficiaries   Administrative data   Read more   Print   PDF version