Navigation path

Additional tools

Affix CE marking

Affix CE marking

Once the necessary steps have been successfully completed, the CE marking must be affixed to the medical device. The CE marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

The identification number of the Notified Body involved in the production control phase must follow the CE marking.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the safety component.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. This minimum dimension may be waived for small-scale safety components.

The CE marking shall be followed by the last two figures of the year in which it was affixed and by the identification number of the Notified Body that deals with the conformity assessment procedure.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity only with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking has to be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials ‘CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking has to indicate conformity with the Directives applied by the manufacturer only. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking has to indicate conformity only with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities specific aspects of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer only. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the CE marking must be affixed to the in-vitro device. The CE marking must be placed visibly and legibly on the device or, if not possible, affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, which may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects that also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity only with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

The identification number of the Notified Body involved in the conformity assessment procedure must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the CE marking must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be adhered to.

When the product is subject to other Directives covering other aspects that also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity only with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

Affix CE marking

Once the necessary steps have been successfully completed, the logo can be affixed on the product.

The marking has to be placed visibly and legibly on the product or, if not possible because of the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension, which may not be less that 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking has to indicate conformity only with the Directives applied by the manufacturer. In that case, particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer only. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

The CE marking on measuring instruments must be accompanied by supplementary metrology marking consisting of the capital letter ‘M’ and the last two digits of the year of its affixing, surrounded by a rectangle. Both markings must be at least 5 mm in height.

If the measuring instrument consists of multiple devices operating together, the markings are required to be affixed on the main device. If a measuring instrument is too small or too sensitive to carry these markings, they may be displayed on the packaging and accompanying documents.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the CE marking must be affixed to the medical device. The CE marking has to be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The CE marking shall be accompanied by the indication of the guaranteed sound power level. A model of this indication is given in Annex IV. The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer only. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer only. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product e.g. if it is too small, it will be given on a label attached to the pressure equipment. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed on the product.

The marking has to be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may be not smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body has been involved in the conformity assessment procedure, its identification number must also be displayed.

For consumer fireworks, according to the applicable standard, a registration number for the tracing of products shall be marked in accordance with the example below: XXXX - YY - ZZZZ... where XXXX refers to the registration number of the notified body issuing the certificate, YY refers to the category of firework in abbreviated format (F1, F2, or F3 for category 1, 2, or 3 respectively), and where ZZZZ... is a processing number used by the notified body.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking has to be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing above must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking must indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible due to the nature of the product, be affixed to the packaging and the accompanying document. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the affixing of the CE marking, the latter shall indicate that such products are also presumed to conform to the provisions of those other Directives.

The CE marking shall indicate conformity with the applicable Directives or relevant parts thereof. In this case, the particulars of the said Directives applied by the manufacturer, as published in the Official Journal of the European Union, must be given in the documents, declaration of conformity or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly and indelibly to the toy, to an affixed label or to the packaging. In the event where this is not possible due to the size of the product, CE marking may alternatively be affixed to a label or an accompanying leaflet. If the CE mark is not visible from outside the packaging, it shall as minimum be affixed to the packaging. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have the same vertical dimension, which may not be less than 5mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the CE marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the CE marking has to indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

Affix CE marking

Once the necessary steps have been successfully completed, the logo must be affixed to the product.

The marking must be placed visibly and legibly on the product or, if not possible because of the nature of the product, be affixed to a data plate. The CE marking shall consist of the initials 'CE' taking the following form:

Affixing CE marking

The various components of the CE marking must have substantially the same vertical dimension and may not be smaller than 5 mm. If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be respected.

When the product is subject to other Directives covering other aspects and which also provide for the ‘CE’ marking, the accompanying documents must indicate that the product also conforms to those other Directives.

However, when one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking has to indicate conformity with the Directives applied by the manufacturer. In this case, the particularities of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such products.

If a Notified Body is involved in the production control phase, its identification number must be also displayed.

Share: FacebookGoogle+LinkedInsend this page to a friend