Navigation path

European standards

Pressure equipment

Directive 97/23/EC

Short name:

Pressure equipment (PED)

Base:

Directive 97/23/ECof the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
OJ L 181 of 9 July 1997

Modification:

[-]

Directives repealed:

[-]

Guide for application:

EC contact point:

DG Enterprise and Industry
Mr. Hans DHOOGE, Fax. +32.2.2967013/2998029
E-mail
Website on pressure equipment and gas appliances

For information about the content and availability of European standards, please contact the European Standardisation Organisations.

Publications in the Official Journal:

  • Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment - OJ C 313 of 12/09/2014
    BG CS DA DE EL EN ES ET FI FR HR HU IT LT LV MT NL PL PT RO SK SL SV PDF Format
    (This list replaces all the previous lists published in the Official Journal.)


  • Stay up to date with the references of harmonised standards for this Directive, published in the Offical Journal by subcribing to the RSS feed  RSS

    Summary list of titles and references harmonised standards under Directive 97/23/EC for Pressure equipment

    The summary list hereunder is a compilation of the references of harmonised standards which have been generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the publication of the references of harmonised standards in the Official Journal of the European Union.
    Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal gives legal effect.

     

    (Publication of titles and references of harmonised standards under Union harmonisation legislation)
    The following list contains references to harmonised standards for pressure equipment and harmonised supporting standards for materials used in manufacturing pressure equipment. In the case of a harmonised supporting standard for materials, presumption of conformity to the essential safety requirements is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard shall be assessed against the design requirements of this specific item of equipment to verify that the essential safety requirements of the Pressure Equipment Directive are satisfied.

    ESO (1)

    Reference and title of the harmonised standard
    (and reference document)

    Reference of superseded standard

    Date of cessation of presumption of conformity of superseded standard
    Note 1

    CEN

    EN 3-8:2006

    Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

     

     

    EN 3-8:2006/AC:2007

     

     

    CEN

    EN 19:2002

    Industrial valves - Marking of metallic valves

     

     

    CEN

    EN 267:2009+A1:2011

    Automatic forced draught burners for liquid fuels

    EN 267:2009

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 287-1:2011

    Qualification test of welders - Fusion welding - Part 1: Steels

    EN 287-1:2004

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 334:2005+A1:2009

    Gas pressure regulators for inlet pressures up to 100 bar

    EN 334:2005

    Note 2.1 

    Date expired
    (31/07/2009) 

    CEN

    EN 378-2:2008+A2:2012

    Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

    EN 378-2:2008+A1:2009

    Note 2.1 

    Date expired
    (30/11/2012) 

    CEN

    EN 593:2009+A1:2011

    Industrial valves - Metallic butterfly valves

    EN 593:2009

    Note 2.1 

    Date expired
    (30/09/2011) 

    CEN

    EN 676:2003+A2:2008

    Automatic forced draught burners for gaseous fuels

     

     

    EN 676:2003+A2:2008/AC:2008

     

     

    CEN

    EN 764-5:2002

    Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials

     

     

    CEN

    EN 764-7:2002

    Pressure equipment - Part 7: Safety systems for unfired pressure equipment

     

     

    EN 764-7:2002/AC:2006

     

     

    CEN

    EN 1057:2006+A1:2010

    Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications

    EN 1057:2006

    Note 2.1 

    Date expired
    (31/08/2010) 

    CEN

    EN 1092-1:2007+A1:2013

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges

    EN 1092-1:2007

    Note 2.1 

    Date expired
    (21/01/2014) 

    CEN

    EN 1092-3:2003

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges

     

     

    EN 1092-3:2003/AC:2007

     

     

    CEN

    EN 1092-4:2002

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges

     

     

    CEN

    EN 1171:2002

    Industrial valves - Cast iron gate valves

     

     

    CEN

    EN 1252-1:1998

    Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C

     

     

    EN 1252-1:1998/AC:1998

     

     

    CEN

    EN 1252-2:2001

    Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C

     

     

    CEN

    EN 1349:2009

    Industrial process control valves

    EN 1349:2000

    Note 2.1 

    Date expired
    (31/05/2010) 

    CEN

    EN 1515-4:2009

    Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC

     

     

    CEN

    EN 1562:2012

    Founding - Malleable cast irons

    EN 1562:1997

    Note 2.1 

    Date expired
    (30/09/2012) 

    CEN

    EN 1563:2011

    Founding - Spheroidal graphite cast irons

    EN 1563:1997

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 1564:2011

    Founding - Ausferritic spheroidal graphite cast irons

    EN 1564:1997

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 1591-1:2013 (new)

    Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation

    EN 1591-1:2001+A1:2009

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 1626:2008

    Cryogenic vessels - Valves for cryogenic service

    EN 1626:1999

    Note 2.1 

    Date expired
    (31/05/2009) 

    CEN

    EN 1653:1997

    Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units

     

     

    EN 1653:1997/A1:2000

    Note 3 

    Date expired
    (28/02/2001) 

    CEN

    EN 1759-3:2003

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges

     

     

    EN 1759-3:2003/AC:2004

     

     

    CEN

    EN 1759-4:2003

    Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges

     

     

    CEN

    EN 1797:2001

    Cryogenic vessels - Gas/material compatibility

    EN 1797-1:1998

    Note 2.1 

    Date expired
    (31/01/2002) 

    CEN

    EN 1866-2:2014 (new)

    Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1

    EN 1866:2005

    Note 2.1 

    30/11/2014 

    CEN

    EN 1866-3:2013

    Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1

    EN 1866:2005

    Note 2.1 

    Date expired
    (24/01/2014) 

    CEN

    EN 1983:2013

    Industrial valves - Steel ball valves

    EN 1983:2006

    Note 2.1 

    28/02/2014 

    CEN

    EN 1984:2010

    Industrial valves - Steel gate valves

    EN 1984:2000

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN ISO 4126-1:2013

    Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)

    EN ISO 4126-1:2004

    Note 2.1 

    31/01/2014 

    CEN

    EN ISO 4126-3:2006

    Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)

     

     

    CEN

    EN ISO 4126-4:2013

    Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO 4126-4:2013)

    EN ISO 4126-4:2004

    Note 2.1 

    31/01/2014 

    CEN

    EN ISO 4126-5:2013

    Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)

    EN ISO 4126-5:2004

    Note 2.1 

    31/01/2014 

    CEN

    EN ISO 4126-7:2013

    Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)

     

     

    CEN

    EN ISO 9606-2:2004

    Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)

     

     

    CEN

    EN ISO 9606-3:1999

    Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)

     

     

    CEN

    EN ISO 9606-4:1999

    Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)

     

     

    CEN

    EN ISO 9606-5:2000

    Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)

     

     

    CEN

    EN ISO 9712:2012

    Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)

    EN 473:2008

    Note 2.1 

    Date expired
    (31/12/2012) 

    CEN

    EN 10028-1:2007+A1:2009

    Flat products made of steels for pressure purposes - Part 1: General requirements

    EN 10028-1:2007

    Note 2.1 

    Date expired
    (31/10/2009) 

    EN 10028-1:2007+A1:2009/AC:2009

     

     

    CEN

    EN 10028-2:2009

    Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

    EN 10028-2:2003

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 10028-3:2009

    Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

    EN 10028-3:2003

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 10028-4:2009

    Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

    EN 10028-4:2003

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 10028-5:2009

    Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled

    EN 10028-5:2003

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 10028-6:2009

    Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered

    EN 10028-6:2003

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 10028-7:2007

    Flat products made of steels for pressure purposes - Part 7: Stainless steels

    EN 10028-7:2000

    Note 2.1 

    Date expired
    (30/06/2008) 

    CEN

    EN 10204:2004

    Metallic products - Types of inspection documents

     

     

    CEN

    EN 10213:2007

    Steel castings for pressure purposes

    EN 10213-3:1995
    EN 10213-4:1995
    EN 10213-2:1995
    EN 10213-1:1995


    Note 2.1 

    Date expired
    (31/05/2008) 

    EN 10213:2007/AC:2008

     

     

    CEN

    EN 10216-1:2013 (new)

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

    EN 10216-1:2002

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10216-2:2013 (new)

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

    EN 10216-2:2002+A2:2007

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10216-3:2013 (new)

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

    EN 10216-3:2002

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10216-4:2013 (new)

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

    EN 10216-4:2002

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10216-5:2013 (new)

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

    EN 10216-5:2004

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10217-1:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

     

     

    EN 10217-1:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-2:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

     

     

    EN 10217-2:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-3:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

     

     

    EN 10217-3:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-4:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

     

     

    EN 10217-4:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-5:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

     

     

    EN 10217-5:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-6:2002

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

     

     

    EN 10217-6:2002/A1:2005

    Note 3 

    Date expired
    (31/07/2005) 

    CEN

    EN 10217-7:2005

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

     

     

    CEN

    EN 10222-1:1998

    Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

     

     

    EN 10222-1:1998/A1:2002

    Note 3 

    Date expired
    (31/10/2002) 

    CEN

    EN 10222-2:1999

    Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties

     

     

    EN 10222-2:1999/AC:2000

     

     

    CEN

    EN 10222-3:1998

    Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties

     

     

    CEN

    EN 10222-4:1998

    Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength

     

     

    EN 10222-4:1998/A1:2001

    Note 3 

    Date expired
    (31/01/2002) 

    CEN

    EN 10222-5:1999

    Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

     

     

    EN 10222-5:1999/AC:2000

     

     

    CEN

    EN 10253-2:2007

    Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements

     

     

    CEN

    EN 10253-4:2008

    Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

     

     

    EN 10253-4:2008/AC:2009

     

     

    CEN

    EN 10269:2013 (new)

    Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

    EN 10269:1999

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 10272:2007

    Stainless steel bars for pressure purposes

    EN 10272:2000

    Note 2.1 

    Date expired
    (30/04/2008) 

    CEN

    EN 10273:2007

    Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

    EN 10273:2000

    Note 2.1 

    Date expired
    (30/06/2008) 

    CEN

    EN 10305-4:2011

    Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

    EN 10305-4:2003

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 10305-6:2005

    Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

     

     

    CEN

    EN ISO 10931:2005

    Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)

     

     

    CEN

    EN 12178:2003

    Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking

     

     

    CEN

    EN 12263:1998

    Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests

     

     

    CEN

    EN 12266-1:2012

    Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements

    EN 12266-1:2003

    Note 2.1 

    Date expired
    (31/10/2012) 

    CEN

    EN 12284:2003

    Refrigerating systems and heat pumps - Valves - Requirements, testing and marking

     

     

    CEN

    EN 12288:2010

    Industrial valves - Copper alloy gate valves

    EN 12288:2003

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12334:2001

    Industrial valves - Cast iron check valves

     

     

    EN 12334:2001/A1:2004

    Note 3 

    Date expired
    (28/02/2005) 

    EN 12334:2001/AC:2002

     

     

    CEN

    EN 12392:2000

    Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment

     

     

    CEN

    EN 12420:2014 (new)

    Copper and copper alloys - Forgings

    EN 12420:1999

    Note 2.1 

    31/12/2014 

    CEN

    EN 12434:2000

    Cryogenic vessels - Cryogenic flexible hoses

     

     

    EN 12434:2000/AC:2001

     

     

    CEN

    EN 12451:2012

    Copper and copper alloys - Seamless, round tubes for heat exchangers

    EN 12451:1999

    Note 2.1 

    Date expired
    (30/11/2012) 

    CEN

    EN 12452:2012

    Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers

    EN 12452:1999

    Note 2.1 

    Date expired
    (30/11/2012) 

    CEN

    EN 12516-1:2005

    Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells

     

     

    EN 12516-1:2005/AC:2007

     

     

    CEN

    EN 12516-2:2004

    Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells

     

     

    CEN

    EN 12516-3:2002

    Valves - Shell design strength - Part 3: Experimental method

     

     

    EN 12516-3:2002/AC:2003

     

     

    CEN

    EN 12516-4:2008

    Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

     

     

    CEN

    EN 12542:2010

    LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture

    EN 12542:2002
    EN 14075:2002


    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12735-1:2010

    Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems

    EN 12735-1:2001

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12735-2:2010

    Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment

    EN 12735-2:2001

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12778:2002

    Cookware - Pressure cookers for domestic use

     

     

    EN 12778:2002/A1:2005

    Note 3 

    Date expired
    (31/12/2005) 

    EN 12778:2002/AC:2003

     

     

    CEN

    EN 12952-1:2001

    Water-tube boilers and auxiliary installations - Part 1: General

     

     

    CEN

    EN 12952-2:2011

    Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories

    EN 12952-2:2001

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12952-3:2011

    Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

    EN 12952-3:2001

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12952-5:2011

    Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler

    EN 12952-5:2001

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12952-6:2011

    Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler

    EN 12952-6:2002

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 12952-7:2012

    Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler

    EN 12952-7:2002

    Note 2.1 

    Date expired
    (24/01/2014) 

    CEN

    EN 12952-8:2002

    Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler

     

     

    CEN

    EN 12952-9:2002

    Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler

     

     

    CEN

    EN 12952-10:2002

    Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure

     

     

    CEN

    EN 12952-11:2007

    Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories

     

     

    CEN

    EN 12952-14:2004

    Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution

     

     

    CEN

    EN 12952-16:2002

    Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler

     

     

    CEN

    EN 12952-18:2012

    Water-tube boilers and auxiliary installations - Part 18: Operating instructions

     

     

    CEN

    EN 12953-1:2012

    Shell boilers - Part 1: General

    EN 12953-1:2002

    Note 2.1 

    Date expired
    (30/09/2012) 

    CEN

    EN 12953-2:2012

    Shell boilers - Part 2: Materials for pressure parts of boilers and accessories

    EN 12953-2:2002

    Note 2.1 

    Date expired
    (30/09/2012) 

    CEN

    EN 12953-3:2002

    Shell boilers - Part 3: Design and calculation for pressure parts

     

     

    CEN

    EN 12953-4:2002

    Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler

     

     

    CEN

    EN 12953-5:2002

    Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler

     

     

    CEN

    EN 12953-6:2011

    Shell Boilers - Part 6: Requirements for equipment for the boiler

    EN 12953-6:2002

    Note 2.1 

    Date expired
    (09/09/2011) 

    CEN

    EN 12953-7:2002

    Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers

     

     

    CEN

    EN 12953-8:2001

    Shell boilers - Part 8: Requirements for safeguards against excessive pressure

     

     

    EN 12953-8:2001/AC:2002

     

     

    CEN

    EN 12953-9:2007

    Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories

     

     

    CEN

    EN 12953-12:2003

    Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler

     

     

    CEN

    EN 12953-13:2012

    Shell boilers - Part 13: Operating instructions

     

     

    CEN

    EN 13121-1:2003

    GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions

     

     

    CEN

    EN 13121-2:2003

    GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance

     

     

    CEN

    EN 13121-3:2008+A1:2010

    GRP tanks and vessels for use above ground - Part 3: Design and workmanship

    EN 13121-3:2008

    Note 2.1 

    Date expired
    (31/08/2010) 

    EN 13121-3:2008+A1:2010/AC:2011

     

     

    CEN

    EN 13134:2000

    Brazing - Procedure approval

     

     

    CEN

    EN 13136:2013 (new)

    Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation

    EN 13136:2001

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 13175:2003+A2:2007

    LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings

    EN 13175:2003

    Note 2.1 

    Date expired
    (30/09/2007) 

    CEN

    EN 13348:2008

    Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum

    EN 13348:2001

    Note 2.1 

    Date expired
    (28/02/2009) 

    CEN

    EN 13371:2001

    Cryogenic vessels - Couplings for cryogenic service

     

     

    CEN

    EN 13397:2001

    Industrial valves - Diaphragm valves made of metallic materials

     

     

    CEN

    EN 13445-1:2009

    Unfired pressure vessels - Part 1: General

    EN 13445-1:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    EN 13445-1:2009/A1:2013 (new)

    Note 3 

    The date of this publication
    () 

    CEN

    EN 13445-2:2009

    Unfired pressure vessels - Part 2: Materials

    EN 13445-2:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    EN 13445-2:2009/A1:2012

    Note 3 

    Date expired
    (31/12/2012) 

    EN 13445-2:2009/A2:2012

    Note 3 

    Date expired
    (31/12/2012) 

    CEN

    EN 13445-3:2009

    Unfired pressure vessels - Part 3: Design

    EN 13445-3:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    EN 13445-3:2009/A1:2012

    Note 3 

    Date expired
    (31/12/2012) 

    EN 13445-3:2009/A2:2013 (new)

    Note 3 

    The date of this publication
    () 

    CEN

    EN 13445-4:2009

    Unfired pressure vessels - Part 4: Fabrication

    EN 13445-4:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    EN 13445-4:2009/A1:2011

    Note 3 

    Date expired
    (03/08/2012) 

    EN 13445-4:2009/A2:2014 (new)

    Note 3 

    31/10/2014 

    CEN

    EN 13445-5:2009

    Unfired pressure vessels - Part 5: Inspection and testing

    EN 13445-5:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    EN 13445-5:2009/A2:2011

    Note 3 

    Date expired
    (03/08/2012) 

    EN 13445-5:2009/A1:2011

    Note 3 

    Date expired
    (03/08/2012) 

    EN 13445-5:2009/A3:2011

    Note 3 

    Date expired
    (03/08/2012) 

    EN 13445-5:2009/A4:2013

    Note 3 

    31/01/2014 

    CEN

    EN 13445-6:2009

    Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

    EN 13445-6:2002

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 13445-8:2009

    Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys

    EN 13445-8:2006

    Note 2.1 

    Date expired
    (31/12/2009) 

    CEN

    EN 13458-1:2002

    Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements

     

     

    CEN

    EN 13458-2:2002

    Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

     

     

    EN 13458-2:2002/AC:2006

     

     

    CEN

    EN 13458-3:2003

    Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements

     

     

    EN 13458-3:2003/A1:2005

    Note 3 

    Date expired
    (31/12/2005) 

    CEN

    EN 13480-1:2012

    Metallic industrial piping - Part 1: General

    EN 13480-1:2002

    Note 2.1 

    Date expired
    (31/12/2012) 

    CEN

    EN 13480-2:2012

    Metallic industrial piping - Part 2: Materials

    EN 13480-2:2002

    Note 2.1 

    Date expired
    (31/12/2012) 

    EN 13480-2:2012/A1:2013

    Note 3 

    28/02/2014 

    CEN

    EN 13480-3:2012

    Metallic industrial piping - Part 3: Design and calculation

    EN 13480-3:2002

    Note 2.1 

    Date expired
    (31/12/2012) 

    CEN

    EN 13480-4:2012

    Metallic industrial piping - Part 4: Fabrication and installation

    EN 13480-4:2002

    Note 2.1 

    Date expired
    (31/12/2012) 

    EN 13480-4:2012/A1:2013

    Note 3 

    28/02/2014 

    CEN

    EN 13480-5:2012

    Metallic industrial piping - Part 5: Inspection and testing

    EN 13480-5:2002

    Note 2.1 

    Date expired
    (31/12/2012) 

    EN 13480-5:2012/A1:2013

    Note 3 

    28/02/2014 

    CEN

    EN 13480-6:2012

    Metallic industrial piping - Part 6: Additional requirements for buried piping

    EN 13480-6:2004

    Note 2.1 

    Date expired
    (31/12/2012) 

    CEN

    EN 13480-8:2012

    Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

    EN 13480-8:2007

    Note 2.1 

    Date expired
    (31/12/2012) 

    EN 13480-8:2012/A1:2014 (new)

    Note 3 

    30/11/2014 

    CEN

    EN 13547:2013 (new)

    Industrial valves - Copper alloy ball valves

     

     

    CEN

    EN ISO 13585:2012

    Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)

    EN 13133:2000

    Note 2.1 

    Date expired
    (31/12/2012) 

    CEN

    EN 13611:2007+A2:2011

    Safety and control devices for gas burners and gas burning appliances - General requirements

    EN 13611:2007

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 13648-1:2008

    Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service

    EN 13648-1:2002

    Note 2.1 

    Date expired
    (31/05/2009) 

    CEN

    EN 13648-2:2002

    Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service

     

     

    CEN

    EN 13648-3:2002

    Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing

     

     

    CEN

    EN 13709:2010

    Industrial valves - Steel globe and globe stop and check valves

    EN 13709:2002

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 13789:2010

    Industrial valves - Cast iron globe valves

    EN 13789:2002

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 13831:2007

    Closed expansion vessels with built in diaphragm for installation in water

     

     

    CEN

    EN 13835:2012

    Founding - Austenitic cast irons

    EN 13835:2002

    Note 2.1 

    Date expired
    (31/07/2012) 

    CEN

    EN 13923:2005

    Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing

     

     

    CEN

    EN 14071:2004

    Pressure relief valves for LPG tanks - Ancillary equipment

     

     

    CEN

    EN 14129:2014 (new)

    LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels

    EN 14129:2004

    Note 2.1 

    The date of this publication
    () 

    CEN

    EN 14197-1:2003

    Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements

     

     

    CEN

    EN 14197-2:2003

    Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

     

     

    EN 14197-2:2003/A1:2006

    Note 3 

    Date expired
    (28/02/2007) 

    EN 14197-2:2003/AC:2006

     

     

    CEN

    EN 14197-3:2004

    Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements

     

     

    EN 14197-3:2004/A1:2005

    Note 3 

    Date expired
    (31/12/2005) 

    EN 14197-3:2004/AC:2004

     

     

    CEN

    EN 14222:2003

    Stainless steel shell boilers

     

     

    CEN

    EN 14276-1:2006+A1:2011

    Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

    EN 14276-1:2006

    Note 2.1 

    Date expired
    (09/09/2011) 

    CEN

    EN 14276-2:2007+A1:2011

    Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements

    EN 14276-2:2007

    Note 2.1 

    Date expired
    (09/09/2011) 

    CEN

    EN 14341:2006

    Industrial valves - Steel check valves

     

     

    CEN

    EN 14359:2006+A1:2010

    Gas-loaded accumulators for fluid power applications

    EN 14359:2006

    Note 2.1 

    Date expired
    (03/08/2012) 

    CEN

    EN 14382:2005+A1:2009

    Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar

    EN 14382:2005

    Note 2.1 

    Date expired
    (30/09/2009) 

    EN 14382:2005+A1:2009/AC:2009

     

     

    CEN

    EN 14394:2005+A1:2008

    Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C

     

     

    CEN

    EN 14570:2014 (new)

    LPG equipment and accessories - Equipping of overground and underground LPG vessels

    EN 14570:2005

    Note 2.1 

    31/10/2014 

    CEN

    EN 14585-1:2006

    Corrugated metal hose assemblies for pressure applications - Part 1: Requirements

     

     

    CEN

    EN 14917:2009+A1:2012

    Metal bellows expansion joints for pressure applications

    EN 14917:2009

    Note 2.1 

    Date expired
    (30/09/2012) 

    CEN

    EN 15001-1:2009

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

     

     

    CEN

    EN ISO 15493:2003

    Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)

     

     

    CEN

    EN ISO 15494:2003

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003)

     

     

    CEN

    EN ISO 15613:2004

    Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)

     

     

    CEN

    EN ISO 15614-1:2004

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)

     

     

    EN ISO 15614-1:2004/A1:2008

    Note 3 

    Date expired
    (31/08/2008) 

    EN ISO 15614-1:2004/A2:2012

    Note 3 

    Date expired
    (31/08/2012) 

    CEN

    EN ISO 15614-2:2005

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)

     

     

    EN ISO 15614-2:2005/AC:2009

     

     

    CEN

    EN ISO 15614-4:2005

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)

     

     

    EN ISO 15614-4:2005/AC:2007

     

     

    CEN

    EN ISO 15614-5:2004

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)

     

     

    CEN

    EN ISO 15614-6:2006

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)

     

     

    CEN

    EN ISO 15614-7:2007

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007)

     

     

    CEN

    EN ISO 15614-8:2002

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)

     

     

    CEN

    EN ISO 15614-11:2002

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)

     

     

    CEN

    EN ISO 15620:2000

    Welding - Friction welding of metallic materials (ISO 15620:2000)

     

     

    CEN

    EN 15776:2011

    Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %

     

     

    CEN

    EN ISO 16135:2006

    Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)

     

     

    CEN

    EN ISO 16136:2006

    Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)

     

     

    CEN

    EN ISO 16137:2006

    Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)

     

     

    CEN

    EN ISO 16138:2006

    Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)

     

     

    CEN

    EN ISO 16139:2006

    Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)

     

     

    CEN

    EN ISO 21787:2006

    Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)

     

     

     

    (1) ESO: European standardisation organisation:

    CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu)

    CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu)

    ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

     

    Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

    Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

    Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

    Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

    Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

     

    Share: FacebookGoogle+LinkedInsend this page to a friend

    Set page to normal font sizeIncrease font size by 200 percentprint this page