Navigation path


Notification

Found : 80
  Body (History):

Kiwa N.V. Certificatie en Keuringen
Sir Winston Churchilllaan 273 Postbus 70 2280 AB
RIJSWIJK
Country : Netherlands

Phone : +31:70:41 44 400
Fax : +31:70:41 44 420

Email : certif@kiwa.nl
Website : www.kiwa.nl

Notified Body number : 0620

Version(s): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Last update : 12/05/2011
 

Return to legislation list

Some information about the accreditation details are available in the PDF
Legislation
89/106/EEC Construction products (History)
Last update : 26/10/2009                 Version(s): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Decision Product family, product /Intended use AoC system Technical specification Body function
95/467/EC Gypsum products (2/4) :
• Plasterboards, blocks, ceiling elements and gypsum plasters, fibrous gypsum plasters casts, including relevant ancillary products (in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings)
System 3
EN 12859:2001
EN 12859:2001/A1:2004
Testing Laboratory
95/467/EC Structural bearings (1/1) :
• Structural bearings (in buildings and civil engineering works where requirements on individual bearings are critical)
System 1
EN 1337-3:2005
Product Certification Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Dry alarm valve assemblies (fire safety)
System 1
EN 12259-3:2000/A1:2001
EN 12259-3:2000/A2:2005
Product Certification Body
FPC Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Input/output devices (fire safety)
System 1
EN 54-18:2005
EN 54-18:2005/AC:2007
EN 54-24:2008
EN 54-25:2008
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Alarm transmission routing devices (fire safety)
System 1
EN 54-21:2006
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Control and indicating devices (fire safety)
System 1
EN 12094-1:2003
EN 54-16:2008
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/AC:1999
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Smoke, heat and flame detectors (fire safety)
System 1
EN 54-5:2000/A1:2002
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Nozzles/sprinklers/outlets (fire safety)
System 1
EN 12259-1:1999 + A1:2001
EN 12259-1:1999+A1:01/A2:04
EN 12259-1:1999+A1:01/A3:06
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Wet alarm valve assemblies (fire safety)
System 1
EN 12259-2:1999/A1:2001
EN 12259-2:1999/A2:2005
EN 12259-2:1999/AC:2002
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• First aid hose systems-kits (fire safety)
System 1
EN 671-1:2001
EN 671-1:2001/AC:2002
EN 671-2: 2001
EN 671-2:2001/A1:2004
Product Certification Body
FPC Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Fire hydrants (fire safety)
System 1
EN 14339:2005
EN 14384:2005
Product Certification Body
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Power supplies (fire detection/alarm components) (fire safety)
System 1
EN 54-4:1997
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/AC:1999
Product Certification Body
Testing Laboratory
Inspection Body
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) :
• Alarm devices (fire safety)
System 1
EN 14604:2005
EN 14604:2005/AC:2008
Inspection Body
Product Certification Body
96/579/EC Circulation fixtures (1/2) :
• Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas)
System 1
EN 1423:1997/A1:2003
Product Certification Body
Inspection Body
96/579/EC Circulation fixtures (1/2) :
• Road lighting columns (for circulation areas)
System 1
EN 40-5:2002
EN 40-6:2002
Product Certification Body
Inspection Body
96/579/EC Circulation fixtures (1/2) :
• Vehicle restraint barriers: transition barriers (for circulation areas)
System 1
EN 1317-5:2007+A1:2008
Inspection Body
Product Certification Body
96/581/EC Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for drainage and/or filtration (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
System 2+
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/AC:2003
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/AC:2003
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/AC:2003
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
FPC Certification Body
Inspection Body
96/581/EC Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as protective layer (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
System 2+
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/AC:2003
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/AC:2003
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/AC:2003
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
FPC Certification Body
Inspection Body
96/581/EC Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as fluid or gas barriers (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
System 2+
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/AC:2003
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/AC:2003
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/AC:2003
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
FPC Certification Body
Inspection Body
96/581/EC Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for reinforcement (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
System 2+
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/AC:2003
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/AC:2003
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/AC:2003
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
FPC Certification Body
Inspection Body
96/582/EC Metal anchors for use in concrete (mechanical fasteners) :
• Metal anchors for use in concrete (heavy-duty type) (for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings)
System 1
ETAG 001 - 1
ETAG 001 - 2
ETAG 001 - 3
ETAG 001 - 4
ETAG 001 - 5
Inspection Body
Product Certification Body
96/582/EC Structural sealant glazing kits of types (curtain walling) :
• Structural sealant glazing kits, Types II and IV (for external walls and roofs)
System 1
ETAG 002 - 1
ETAG 002 - 2
ETAG 002 - 3
Product Certification Body
FPC Certification Body
Inspection Body
96/582/EC Structural sealant glazing kits of types (curtain walling) :
• Structural sealant glazing kits, Types I and III (for external walls and roofs)
System 2+
ETAG 002 - 1
ETAG 002 - 2
ETAG 002 - 3
FPC Certification Body
Inspection Body
97/161/EC Metal anchors for use in concrete for fixing lightweight systems (1/1) :
• Metal anchors for use in concrete (light-duty type) (for use in reduntant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations)
System 2+
ETAG 001 - 6
FPC Certification Body
Inspection Body
97/177/EC Metal injection anchors for use in masonry (1/1) :
• Metal injection anchors for use in masonry (fixing and/or supporting to masonry, structural elements (which contribute to the stability of the works) or heavy units such as claddings as well as installations)
System 1
ETAG 001 - 5
Product Certification Body
Inspection Body
97/462/EC Wood-based panels (1/2) :
• Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external application)
System 1
EN 13986:2004
Inspection Body
Product Certification Body
97/462/EC Wood-based panels (1/2) :
• Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications)
System 2+
EN 13986:2004
FPC Certification Body
Inspection Body
97/462/EC Wood-based panels (2/2) :
• Unfaced, overlaid and veneered or coated wood-based panels (for non structural elements in internal or external applications)
System 1
EN 13986:2004
FPC Certification Body
Inspection Body
97/463/EC Plastic anchors for use in concrete and masonry (1/1) :
• Plastic anchors for use in concrete and masonry (for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems)
System 2+
ETAG 001 - 6
FPC Certification Body
Inspection Body
97/638/EC Fasteners for structural timber products (1/1) :
• Shear plates (for structural timber products)
• Nailing plates (for structural timber products)
• Punched nail plates (for structural timber products)
• Toothed-plate connectors (for structural timber products)
System 2+
ETAG 015
FPC Certification Body
Inspection Body
97/740/EC Masonry and related products (1/3) :
• Masonry units category I (in walls, columns and partitions)
System 2+
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
FPC Certification Body
97/740/EC Masonry and related products (2/3) :
• Lintels (in walls and partitions)
System 3
EN 845-2:2003
Testing Laboratory
97/740/EC Masonry and related products (2/3) :
• Bed joint reinforcement (in walls and partitions)
System 3
EN 845-3:2003
Testing Laboratory
97/740/EC Masonry and related products (2/3) :
• Brackets (in walls and partitions)
• Joist hangers (in walls and partitions)
• Tension straps (in walls and partitions)
• Ties (in walls and partitions)
System 3
EN 845-1:2003
Testing Laboratory
97/808/EC Floorings (2/2) :
• Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses)
System 3
EN 14041:2004
EN 14041:2004/AC:2006
Testing Laboratory
97/808/EC Floorings (2/2) :
• Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses)
System 1
EN 14041:2004
EN 14041:2004/AC:2006
Product Certification Body
FPC Certification Body
Inspection Body
98/143/EC Systems of mechanically fastened flexible roof waterproofing membranes (1/1) :
• Systems of mechanically fastened flexible roof waterproofing membranes including the system of fastening, jointing and edging, and sometimes thermal insulation, limited to continuous watertight systems based on flexible sheets (for roof waterproofing)
System 2+
ETAG 006
FPC Certification Body
Inspection Body
98/213/EC Internal partition kits (1/5) :
• Internal partition kits (for uses subject to reaction to fire requirements)
System 1
ETAG 003
Product Certification Body
Inspection Body
98/213/EC Internal partition kits (1/5) :
• Internal partition kits (for uses subject to reaction to fire requirements)
System 3
ETAG 003
Testing Laboratory
98/214/EC Structural metallic products and ancillaries (1/4) :
• Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures)
System 2+
EN 10025-1:2004
EN 10210-1:2006
EN 10219-1:2006
EN 15088:2005
FPC Certification Body
Inspection Body
98/279/EC Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1) :
• Non load-bearing permanent shuttering kits/systems, to be filled with normal concrete and, where relevant, with reinforcement, based on either: hollow blocks made of an insulating material (or a combination of an insulating material and other materials) (for the construction of external and internal walls subject to fire regulations, in buildings)
System 1
ETAG 009
Product Certification Body
FPC Certification Body
Inspection Body
98/279/EC Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1) :
• Non load-bearing permanent shuttering kits/systems, to be filled with normal concrete and, where relevant, with reinforcement, based on either: hollow blocks made of an insulating material (or a combination of an insulating material and other materials) (for the construction of external and internal walls subject to fire regulations, in buildings)
System 2+
ETAG 009
FPC Certification Body
Inspection Body
98/437/EC Internal and external wall and ceiling finishes (3/5) :
• Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations)
System 1
EN 438-7:2005
Inspection Body
Product Certification Body
98/437/EC Internal and external wall and ceiling finishes (3/5) :
• Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations)
System 3
EN 13964:2004
EN 13964:2004/A1:2006
Testing Laboratory
98/437/EC Internal and external wall and ceiling finishes (3/5) :
• Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations)
System 1
EN 13964:2004
EN 13964:2004/A1:2006
Product Certification Body
FPC Certification Body
Inspection Body
98/456/EC Post-tensioning kits for the prestressing of structures (1/1) :
• Post-tensioning kits (for the prestressing of structures)
System 1+
ETAG 013
Product Certification Body
Inspection Body
98/598/EC Aggregates for uses with high safety requirements (2/2) :
• Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works)
System 2+
EN 13043:2002
EN 13043:2002/AC:2004
FPC Certification Body
Inspection Body
98/598/EC Aggregates for uses with high safety requirements (2/2) :
• Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work)
System 2+
EN 12620:2002
EN 13055-1:2002
EN 13139:2002
FPC Certification Body
Inspection Body
98/598/EC Aggregates for uses with high safety requirements (2/2) :
• Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works)
System 2+
EN 13242:2002
EN 13242:2002/AC:2004
FPC Certification Body
Inspection Body
98/598/EC Aggregates for uses with high safety requirements (2/2) :
• Armourstones (for hydraulic structures and other civil engineering works)
System 2+
EN 13383-1:2002
Inspection Body
FPC Certification Body
98/598/EC Aggregates for uses with high safety requirements (2/2) :
• Railway ballast (for railway works)
System 2+
EN 13450:2002
EN 13450:2002/AC:2004
Inspection Body
FPC Certification Body
98/599/EC Liquid applied roof waterproofing kits (3/3) :
• Liquid applied roof waterproofing kits (for uses subject to reaction to fire regulations)
System 1
ETAG 005
Product Certification Body
Inspection Body
98/599/EC Liquid applied roof waterproofing kits (3/3) :
• Liquid applied roof waterproofing kits (for uses subject to reaction to fire regulations)
System 3
ETAG 005
Testing Laboratory
98/601/EC Road construction products (1/2) :
• Bituminous mixtures (for road construction and surface treatment of roads)
System 2+
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-7:2006
EN 13108-7:2006/AC:2008
FPC Certification Body
Inspection Body
98/601/EC Road construction products (1/2) :
• Surface treatments (for surface treatments of roads)
System 2+
EN 12273:2008
Inspection Body
FPC Certification Body
99/90/EC Membranes (1/3) :
• Roof sheets (in buildings)
System 2+
EN 13707:2004
EN 13707:2004/A1:2006
EN 13956:2005
EN 13956:2005/AC:2006
FPC Certification Body
Inspection Body
99/90/EC Membranes (1/3) :
• Damp proofing sheets (in buildings)
System 2+
EN 13967:2004
EN 13967:2004/A1:2006
EN 13969:2004
EN 13969:2004/A1:2006
FPC Certification Body
Inspection Body
99/90/EC Membranes (2/3) :
• Water vapour control layers (for uses subject to reaction to fire regulations)
System 1
EN 13970:2004
EN 13970:2004/A1:2006
EN 13984:2004
EN 13984:2004/A1:2006
Inspection Body
Product Certification Body
99/90/EC Membranes (2/3) :
• Roof sheets (for uses subject to reaction to fire regulations)
System 1
EN 13707:2004
EN 13707:2004/A1:2006
Inspection Body
Product Certification Body
99/90/EC Membranes (2/3) :
• Roof underlays (for uses subject to reaction to fire regulations)
System 1
EN 13859-1:2005
Inspection Body
Product Certification Body
99/90/EC Membranes (2/3) :
• Damp proofing sheets (for uses subject to reaction to fire regulations)
System 1
EN 13967:2004
EN 13967:2004/A1:2006
EN 13969:2004
EN 13969:2004/A1:2006
Inspection Body
Product Certification Body
99/91/EC Thermal insulating products (1/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (any)
System 3
EN 13162:2001
EN 13162:2001/AC:2005
EN 13163:2001
EN 13163:2001/AC:2005
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13165:2001/AC:2005
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13166:2001/AC:2005
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13167:2001/AC:2005
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13168:2001/AC:2005
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13169:2001/AC:2005
EN 13170:2001
EN 13170:2001/AC:2005
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13171:2001/AC:2005
Testing Laboratory
99/91/EC Thermal insulating products (2/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire)
System 3
EN 13162:2001
EN 13162:2001/AC:2005
EN 13163:2001
EN 13163:2001/AC:2005
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13165:2001/AC:2005
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13166:2001/AC:2005
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13167:2001/AC:2005
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13168:2001/AC:2005
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13169:2001/AC:2005
EN 13170:2001
EN 13170:2001/AC:2005
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13171:2001/AC:2005
Testing Laboratory
99/91/EC Thermal insulating products (2/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire)
System 1
EN 13162:2001
EN 13162:2001/AC:2005
EN 13163:2001
EN 13163:2001/AC:2005
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13165:2001/AC:2005
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13166:2001/AC:2005
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13167:2001/AC:2005
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13168:2001/AC:2005
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13169:2001/AC:2005
EN 13170:2001
EN 13170:2001/AC:2005
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13171:2001/AC:2005
Product Certification Body
Inspection Body
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) :
• Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes))
System 3
EN 13241-1:2003
EN 14351-1:2006
Testing Laboratory
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) :
• Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes)
System 1
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 1158:1997/A1:2002/AC:2006
EN 179:1997/A1:2001
Product Certification Body
Inspection Body
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) :
• Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes)
System 1
EN 14351-1:2006
Testing Laboratory
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) :
• Windows (with or without related hardware) (any other)
System 3
EN 14351-1:2006
Testing Laboratory
99/94/EC Precast normal/lightweight/autoclaved aerated concrete products (1/1) :
• Precast normal/lightweight/autoclaved aerated concrete products (for structural use)
System 2+
EN 12737:2004+A1:2007
EN 12794:2005+A1:2007
EN 12843:2004
EN 13224:2004+A1:2007
EN 13225:2004
EN 13225:2004/AC:2006
EN 13693:2004
EN 13747:2005
EN 13747:2005/AC:2006
EN 13978-1:2005
EN 14843:2007
EN 14844:2006
EN 14991:2007
EN 14992:2007
EN 15050:2007
EN 1520:2002
FPC Certification Body
Inspection Body
99/469/EC Products related to concrete, mortar and grout (1/2) :
• Additions (type I) (for concrete, mortar and grout)
System 2+
EN 12878:2005
EN 12878:2005/AC:2006
FPC Certification Body
Inspection Body
99/469/EC Products related to concrete, mortar and grout (1/2) :
• Concrete protection and repair products (for other uses in buildings and civil engineering works)
System 2+
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
FPC Certification Body
Inspection Body
99/469/EC Products related to concrete, mortar and grout (1/2) :
• Admixtures (for concrete, mortar and grout)
System 2+
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-2:2001/A2:2005
EN 934-4:2001
FPC Certification Body
Inspection Body
99/469/EC Products related to concrete, mortar and grout (2/2) :
• Concrete protection and repair products (for uses subject to reaction to fire regulations)
System 1
EN 1504-2:2004
EN 1504-4:2004
Product Certification Body
FPC Certification Body
Inspection Body
99/469/EC Products related to concrete, mortar and grout (2/2) :
• Concrete protection and repair products (for uses subject to reaction to fire regulations)
System 3
EN 1504-2:2004
EN 1504-4:2004
Testing Laboratory
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) :
• Leakage alarm systems and overfill prevention devices (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building)
System 3
EN 13616:2004
EN 13616:2004/AC:2006
Testing Laboratory
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :
• Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building)
System 1
EN 1057:2006
Inspection Body
Product Certification Body
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
• Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance)
System 1
EN 1096-4:2004
EN 12150-2:2004
EN 12337-2:2004
EN 13024-2:2004
EN 14178-2:2004
EN 14179-2:2005
EN 14449:2005
EN 14449:2005/AC:2005
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 1863-2:2004
EN 572-9:2004
Product Certification Body
Inspection Body
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
• Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance)
System 1
EN 1279-5:2005
Product Certification Body
Inspection Body
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) :
• Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing)
System 1
EN 14179-2:2005
EN 14449:2005
EN 14449:2005/AC:2005
Inspection Body
Product Certification Body
2000/447/EC Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6) :
• Self-supporting composite lightweight panels (for uses subject to reaction to fire regulations)
System 1
ETAG 016 - 4
Inspection Body
Product Certification Body
Set page to normal font size Increase font size by 200 percentprint this page