| Decision |
Product family, product /Intended use |
AoC system |
Technical specification |
Body function |
| 96/579/EC |
Circulation fixtures (1/2) :
• Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas)
|
System 1
|
EN 1423:2012
|
Product Certification Body
Inspection Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road marking products: retroreflecting road studs (for circulation area)
|
System 1
|
EN 1463-1:2009
|
Product Certification Body
Inspection Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas)
|
System 1
|
EN 12966-1:2005+A1:2009
|
Product Certification Body
Inspection Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas)
|
System 1
|
EN 12368:2006
|
Inspection Body
Product Certification Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas)
|
System 1
|
EN 12352:2006
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road lighting columns (for circulation areas)
|
System 1
|
EN 40-4:2005
EN 40-4:2005/AC:2006
EN 40-5:2002
EN 40-6:2002
EN 40-7:2002
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 96/579/EC |
Circulation fixtures (1/2) :
• Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent traffic signs (for circulation areas)
|
System 1
|
EN 12899-1:2007
|
Product Certification Body
Test Laboratory
Inspection Body
|
| 96/581/EC |
Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as fluid or gas barriers (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
|
System 2+
|
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
EN 13493:2005
|
FPC Certification Body
Inspection Body
|
| 96/581/EC |
Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for reinforcement (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
|
System 2+
|
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
EN 13493:2005
|
FPC Certification Body
Inspection Body
|
| 96/581/EC |
Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for drainage and/or filtration (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
|
System 2+
|
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
EN 13493:2005
|
FPC Certification Body
Inspection Body
|
| 96/581/EC |
Geotextiles (1/2) :
• Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as protective layer (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal)
|
System 2+
|
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13251:2000
EN 13251:2000/A1:2005
EN 13252:2000
EN 13252:2000/A1:2005
EN 13253:2000
EN 13253:2000/A1:2005
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/AC:2003
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/AC:2003
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/AC:2003
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/AC:2003
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/AC:2003
EN 13361:2004
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004
EN 13491:2004/A1:2006
EN 13492:2004
EN 13492:2004/A1:2006
EN 13493:2005
|
FPC Certification Body
Inspection Body
|
| 96/582/EC |
Metal anchors for use in concrete (mechanical fasteners) :
• Metal anchors for use in concrete (heavy-duty type) (for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings)
|
System 1
|
ETAG 001 - 1
ETAG 001 - 2
ETAG 001 - 3
ETAG 001 - 3 Amendment
ETAG 001 - 4
ETAG 001 - 5
ETAG 001 - 6
ETAG 001 - 6 Amendment
|
Product Certification Body
Test Laboratory
Inspection Body
|
| 97/740/EC |
Masonry and related products (1/3) :
• Masonry units category I (in walls, columns and partitions)
|
System 2+
|
EN 771-1:2011
EN 771-2:2011
EN 771-3:2011
EN 771-4:2011
EN 771-5:2011
EN 771-6:2011
|
FPC Certification Body
Inspection Body
|
| 97/740/EC |
Masonry and related products (1/3) :
• Factory-made, designed masonry mortars (in walls, columns and partitions)
|
System 2+
|
EN 998-2:2010
|
FPC Certification Body
Inspection Body
|
| 97/808/EC |
Floorings (2/2) :
• Floor screed materials (for internal uses)
|
System 1
|
EN 13454-1:2004
EN 13813:2002
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 97/808/EC |
Floorings (2/2) :
• Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses)
|
System 1
|
EN 14904:2006
|
Inspection Body
Product Certification Body
|
| 98/143/EC |
Systems of mechanically fastened flexible roof waterproofing membranes (1/1) :
• Systems of mechanically fastened flexible roof waterproofing membranes including the system of fastening, jointing and edging, and sometimes thermal insulation, limited to continuous watertight systems based on flexible sheets (for roof waterproofing)
|
System 2+
|
ETAG 006
|
FPC Certification Body
Inspection Body
|
| 98/279/EC |
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1) :
• Non load-bearing permanent shuttering kits/systems, to be filled with normal concrete and, where relevant, with reinforcement, based on either: hollow blocks made of an insulating material (or a combination of an insulating material and other materials) (for the construction of external and internal walls subject to fire regulations, in buildings)
• Non load-bearing permanent shuttering kits/systems, to be filled with normal concrete and, where relevant, with reinforcement, based on either: panels made of an insulating material (or a combination of an insulating material and other materials), consisting of shuttering leaves linked by spacers (for the construction of external and internal walls not subject to fire regulations, in buildings)
|
System 2+
|
ETAG 009
|
FPC Certification Body
Inspection Body
|
| 98/279/EC |
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1) :
• Non load-bearing permanent shuttering kits/systems, to be filled with normal concrete and, where relevant, with reinforcement, based on either: hollow blocks made of an insulating material (or a combination of an insulating material and other materials) (for the construction of external and internal walls subject to fire regulations, in buildings)
|
System 1
|
ETAG 009
|
Product Certification Body
FPC Certification Body
Inspection Body
|
| 98/436/EC |
Roof coverings, rooflights, roof windows and ancillary products (2/6) :
• Rooflights (for uses subject to reaction to fire regulations)
|
System 1
|
EN 1873:2005
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 98/437/EC |
Internal and external wall and ceiling finishes (3/5) :
• Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations)
|
System 1
|
EN 13964:2004
EN 13964:2004/A1:2006
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 98/437/EC |
Internal and external wall and ceiling finishes (3/5) :
• Sidings (as internal or external finishes in walls or ceilings subject to reaction to fire regulations)
|
System 1
|
EN 534:2006+A1:2010
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 98/437/EC |
Internal and external wall and ceiling finishes (3/5) :
• Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations)
|
System 1
|
EN 438-7:2005
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Aggregates for bituminous mixtures and surface treatments (for roads and other civil engineering works)
|
System 2+
|
EN 13043:2002
EN 13043:2002/AC:2004
EN 13055-2:2004
|
FPC Certification Body
Inspection Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works)
|
System 2+
|
EN 13055-2:2004
EN 13242:2002+A1:2007
|
FPC Certification Body
Inspection Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Armourstones (for hydraulic structures and other civil engineering works)
|
System 2+
|
EN 13383-1:2002
EN 13383-1:2002/AC:2004
|
FPC Certification Body
Inspection Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Railway ballast (for railway works)
|
System 2+
|
EN 13450:2002
EN 13450:2002/AC:2004
|
FPC Certification Body
Inspection Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work)
|
System 2+
|
EN 12620:2002+A1:2008
EN 13055-1:2002
EN 13055-1:2002/AC:2004
EN 13055-2:2004
EN 13139:2002
EN 13139:2002/AC:2004
|
FPC Certification Body
Inspection Body
|
| 98/598/EC |
Aggregates for uses with high safety requirements (2/2) :
• Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works)
|
System 2+
|
EN 13055-2:2004
|
FPC Certification Body
Inspection Body
|
| 98/601/EC |
Road construction products (1/2) :
• Bituminous mixtures (for road construction and surface treatment of roads)
|
System 2+
|
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-7:2006
EN 13108-7:2006/AC:2008
|
FPC Certification Body
Inspection Body
|
| 98/601/EC |
Road construction products (1/2) :
• Surface treatments (for surface treatments of roads)
|
System 2+
|
EN 12273:2008
|
Inspection Body
FPC Certification Body
|
| 98/601/EC |
Road construction products (2/2) :
• Bituminous mixtures (for uses subject to reaction to fire regulations)
|
System 1
|
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-7:2006
EN 13108-7:2006/AC:2008
|
Inspection Body
Product Certification Body
|
| 99/90/EC |
Membranes (1/3) :
• Roof sheets (in buildings)
|
System 2+
|
EN 13707:2004+A2:2009
EN 13956:2005
EN 13956:2005/AC:2006
EN 13956:2012
|
FPC Certification Body
Inspection Body
|
| 99/90/EC |
Membranes (1/3) :
• Damp proofing sheets (in buildings)
|
System 2+
|
EN 13967:2004
EN 13967:2004/A1:2006
EN 13967:2012
EN 13969:2004
EN 13969:2004/A1:2006
|
FPC Certification Body
Inspection Body
|
| 99/90/EC |
Membranes (2/3) :
• Roof sheets (for uses subject to reaction to fire regulations)
|
System 1
|
EN 13707:2004+A2:2009
EN 13956:2005
EN 13956:2005/AC:2006
EN 13956:2012
|
Inspection Body
Product Certification Body
|
| 99/90/EC |
Membranes (2/3) :
• Damp proofing sheets (for uses subject to reaction to fire regulations)
|
System 1
|
EN 13969:2004
EN 13969:2004/A1:2006
|
Inspection Body
Product Certification Body
|
| 99/90/EC |
Membranes (2/3) :
• Roof underlays (for uses subject to reaction to fire regulations)
|
System 1
|
EN 13859-1:2005+A1:2008
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 99/90/EC |
Membranes (2/3) :
• Water vapour control layers (for uses subject to reaction to fire regulations)
|
System 1
|
EN 13859-1:2005+A1:2008
EN 13859-2:2004+A1:2008
EN 13970:2004
EN 13970:2004/A1:2006
EN 13984:2004
EN 13984:2004/A1:2006
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 99/90/EC |
Membranes (2/3) :
• Damp proof courses (for uses subject to reaction to fire regulations)
|
System 1
|
EN 14909:2006
EN 14909:2012
EN 14967:2006
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 99/91/EC |
Thermal insulating products (2/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire)
|
System 3
|
EN 13162:2008
EN 13163:2008
EN 13164:2008
EN 13165:2008
EN 13166:2008
EN 13167:2008
EN 13168:2008
EN 13169:2008
EN 13170:2008
EN 13171:2008
|
Test Laboratory
|
| 99/91/EC |
Thermal insulating products (2/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire)
|
System 1
|
EN 13162:2008
EN 13163:2008
EN 13164:2008
EN 13165:2008
EN 13166:2008
EN 13167:2008
EN 13168:2008
EN 13169:2008
EN 13170:2008
EN 13171:2008
EN 14063-1:2004
EN 14063-1:2004/AC:2006
EN 14316-1:2004
EN 14317-1:2004
|
Product Certification Body
Inspection Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (1/2) :
• Admixtures (for concrete, mortar and grout)
|
System 2+
|
EN 934-2:2009
EN 934-3:2009
EN 934-4:2009
|
FPC Certification Body
Inspection Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (1/2) :
• Concrete protection and repair products (for other uses in buildings and civil engineering works)
|
System 2+
|
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
|
FPC Certification Body
Inspection Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (1/2) :
• Additions (type I) (for concrete, mortar and grout)
|
System 2+
|
EN 12878:2005
EN 12878:2005/AC:2006
|
FPC Certification Body
Inspection Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (1/2) :
• Additions (Type II) (for concrete, mortar and grout)
|
System 1+
|
EN 450-1:2005+A1:2007
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (1/2) :
• Fibres (for structural uses in concrete, mortar and grout)
|
System 1
|
EN 14889-1:2006
EN 14889-2:2006
|
Inspection Body
Test Laboratory
Product Certification Body
|
| 99/469/EC |
Products related to concrete, mortar and grout (2/2) :
• Concrete protection and repair products (for uses subject to reaction to fire regulations)
|
System 1
|
EN 1504-2:2004
EN 1504-4:2004
|
FPC Certification Body
Inspection Body
|
