A unique ID for the operator (optional when sending an initial request for a permit, but mandatory after the ID has been given) To allow a reference to (multiple) pre-existing document, i.e. Permits, i.e. MonitoringPlans The submission code of the document.This element describes the reason for submitting the document, i.e. specifies whether the document holds e.g. request permit message, update monitoring plan message, etc. Complex element containing information about the creation and status of the submitted document EUETSRequest root element Version of the EU ETS Reporting Language taxonomy used Revision number of the EU ETS Reporting Language taxonomy used Unique reference for this installation in the country's permitting system The name of the organisation A specification of the administering Member State of the aircraft operator A reference to a specific installation unit A unique reference for this document Complex element containing details of the operator Contact details of the operator Primary street address Additional street address The Post office box number of the address A code specifying the postcode of the address City of the address Region of the address Country of the address The email address for the organisation Primary phone number Secondary phone number Fax number Contact Details of the Primary Contact person for the operator. (Subsequently enterred contacts will be Secondary, Tertiairy, etc.) First name of the person Last name of the contact person (Mr, Mrs, Ms, Dr, PhD, etc.) The job title of the person (e.g. Plant manager) The role of the person The email address for the person URL of the Webaddress Complex data element containing contact details for parent company who owns the operator Complex data element containing contact details for the natural person who owns the operator The details for an aviation operator A specification of the unique ICAO Designator (used in the call sign for Air Traffic Control purposes) of the Parent Company A specification of the name of a subsidiary company A specification of the unique ICAO Designator (used in the call sign for Air Traffic Control purposes) of a subsidiary company The name of the aircraft operator on the list pursuant to Article 18a(3) of the EU ETS Directive. A unique identifier for the aircraft operator as stated in the Commission's list of aircraft operators Complex element containing any details considered as additional information Complex element containing the details of the permit The details of the Competent Authority that granted the permit Indicates the type of the permit (e.g. environment permit, ETS permit, IPPC permit, etc.) Contact person(s) for the permit Complex element containing details of the installation, individual units and the monitoring plans for each Complex element containing details for the stationary installation operations Complex element containing details for the Aviation operations Monitoring plan for CO2 emissions Information of the installation Monitoring plan for NOx emissions Monitoring plan for N2O emissions Contact details of the contact person for the installation A complex element (attachementType) containing an overview (picture) of the entire installation (e.g. including possible source streams, GHG-Units and Emitting sources) Details of the installation unit For specifying combustion or process stream or fuel type A reference for each of the installation units this stack includes Complex element for defining ETS liability for the pollutants A complex element describing the mass balance calculations that are included in the monitoring plan A complex element describing the continuous emissions measurement systems that are included in the monitoring plan A complex element describing the fall back methods that are included in the monitoring plan A reference to a specific source stream A reference to a specific standard monitoring data element A specification of the type of mass balance element (Input, Output, Export, Stock Changes) A specification whether any biomass is used in combustion or in a process. TRUE if used. A reference to a stack emission source Information to be added A complex element describing the uncertainty assessment and evidence for this measurement instrument The unique ICAO designator (used in the call sign for Air Traffic Control purposes) The issuing authority for the air operating licence of the aircraft operator The issuing authority for the air operating licence of the aircraft operator A unique ID of the Operating Licence of the aircraft operator The issuing authority for the Operating Licence of the aircraft operator The Name of the entity that legally holds the permit. Should always be the same as the AccountHolderName in the CITL. The country in which the operator operates The start date of the permit for this specific installation site The end date of the permit for this specific installation site An open field for any comments on changes that might have occured with regards to previous permits The street address of the installation site Latitude value for Installation site (decimal degrees) Longitude value for Installation site (decimal degrees) A unique installation ID for this installation, should be the same as the installation ID in the countrys emission trading registry A description of the Annex 1 activities of the installation Code or reference number of the installation/operator for this classification system NACE, NOSE, EPRTR, CRF/IPPC Code or reference number of the installation/operator for this classification system. A set of lists - one for each ClassificationSystemCode, i.e. IPCC codes, NACE codes, etc. The starting date of the installation The closing date of the installation Status of the installation, e.g. closed, continuous operation, temporary or test operation, etc. Detailed description of the status of the installation A unique name for the installation unit A serial number or similar identification for the installation unit on the installation site Describes the type of the installation unit (e.g. furnace, boiler, etc.) The CRF code of the installation unit Defines the type of usage of the installation unit (i.e. process or combustion) The value of the capacity of the installation unit in which emits emissions within installation site The capacity of the installation unit in which emits emissions within installation site (attribute: CapacityMetrics t/day, t/annum, t/hr, m³/day, etc) The value of the power of the installation unit which emits combustion emissions within installation site The power of the installation unit which emits combustion emissions within installation site (attribute: PowerMetrics MWth, MWe, kWth, kWe etc) The estimation for the yearly hours in operation for the installation unit CO2, NOx, or N2O A true/false element to distinguish between EU-ETS units and Non-EuETS (DAA) activities (to cross check annual report to ensure it includes all schedule 1 activities) A globally unique identifier for the source stream (category) An optional, nationally unique identifier for the source stream The number of the percentage of the source stream (e.g. in case of mixed fuels) The name of the fuels or material flow or process causing the emissions An explanation of the origins of the source stream (EU ETS regulations and non-EU ETS regulations) The percentage of biomass of the source stream A specification whether the Source stream represents a commercially traded / commercial standard fuel: - Commercial Standard Fuel - Commercially Traded Fuel - Commercially Traded Material - Other - None A specification of the waste catalog number for this source stream A specification of the IEA (International Energy Agency) Category number for the source stream The name of the CO2 transfer point A serial number or similar identification for the CO2 transfer point on the installation site A boolean element to specify whether transfered CO2 is being sent out or received at this transfer point. TRUE if sent out. A unique name for the item from which emissions are emitted as a result of CCS activities within an installation site carrying out carbon capture, transport and geological storage. A unique identification number for the item from which emissions are emitted as a result of CCS activities within an installation site carrying out carbon capture, transport and geological storage. A code representing the type of CCS item (Emission Source, Potential Emission Source, Transport Network and Geological Storage Site) A reference for each emission source to which transferred CO2, captured CO2 or geolocially stored CO2 facility/installation it relates. Specification that leakage can be excluded as an emission source because emissions or release into water column from that leakage can no longer be detected. A specification of the starting point of the transport network A specification of the ending point of the transport network A specification of the equipment of which the transport network consists A specification of the emission factor per piece of an equipment in the transport network A unique name for this Measurement Instrument in each Source stream into / stack out of GHG-emitting units within an installation site (Under EU ETS regulations and non- EU ETS regulations) A serial number or similar identification for the measurement instrument on the installation site Describes the type of the measurement instrument A specification of the location of this Measurement Instrument in each Source stream into / stack out of GHG-emitting units within an installation site (Under EU ETS regulations and non-EU ETS regulations in so far they relevant for the determination of GHG emissions) A specification whether the measurement device is an online gas-analyser or gas chromatograph. TRUE if gas-analyser. A specification that operation of the systems is meeting requirements of EN ISO 9001:2000 A specification of whether calibration services and suppliers of calibration gases are accredited against EN ISO 17025:2005 A specification on how validation and intercomparison are carried out according to section 13.5 MRG A specification of all statistically significant differences between end results of non-accredited labs and accredited labs Describes the priciple of the measurement of the measurement instrument Minimal and maximal value/percentage of measurement device Sampling frequency of the measurement instrument Description of the calibration of the measurement instrument (e.g. periodic, continuous) Description of the official verification of the measurement instrument A specification of uncertainty assessment of measurement instruments and measurement system used for determining the amount of a source stream A specification of the evidence of the uncertainty assessment of measurement instruments and measurement system used for determining the amount of a source stream A reference to a specific sampling analysis element A reference to the installation unit in which the source stream is used / References to the installation units which the stack emission consists of A reference to a specific source stream A reference to a specific standard monitoring data element A reference to a stack emission this connection point refers to A unique name for this stack emission out of GHG-emitting units within an installation site (under EU ETS regulations and Not under EU ETS regulations). This is equivalent to emission point reference. A reference for each of the installation units this stack includes An optional reference to the source stream(s) for this installation unit The size of the installation regards to CO2 (A1, A2, A (i.e. A1 or A2), B, or C) Estimate of the combined yearly emissions of all CO2-units of the installation for the validity period of the permit A specification of the Schedule 1 Activity for a specific source stream, according to Table 1 of paragraph 5.2 in Annex 1 of the MRG A specification of the relative size of the source stream within the installation (under EU ETS regulation) (Major, Minor, De Minimis) An estimate of the yearly CO2 emission for a specific source stream The formula used to calculate the emission Information on the calculations done Using the formula and explanation, a worked out approximate (or estimated) calculation of the emission A unique name for this continuous emission measurement system in a stack emission out of CO2-emitting units within an installation site (under EU ETS regulations) A specification per source of the monitoring measurement method used. A specification of the method for determining flue gas flow Points measured in a stack emission out of CO2-emitting units within an installation site (under EU ETS regulations) A specification of the measuring frequency for this measurement system A specification of the data collection and storage procedures for this measurement system A specification of the sampling rates for this measurement system A specification of any missing data during with regards to this measurment system A specification of how substitution values for each missing hour data is determined for the parameters used to determine emissions with continuous measurement method. A specification of the corroborating calculation or application of NEN EN 14181 A reference to the source streams that do not meet tier 1 because of technical infeasibility or unreasonable costs: Source Stream Reference Number A specification of the reason why one or more source streams do not meet tier 1 because of technical infeasibility or unreasonable costs. A description of fall back method: fully customized monitoring methodology for whole installation An analysis of uncertainties of all variables and parameters used for the calculation of annual emission level A unique name for this CO2-transfer stream into and out of an installation site (under EU ETS regulations) A specification of the origin for this CO2-transfer stream into an installation site (under EU ETS regulations) A specification of the destination for this CO2-transfer stream out of an installation site (under EU ETS regulations) A specification whether the CO2 being transferred, according to 5.5 (blast furnace gas, coke oven gas or natural gas), contains inherent CO2 or not. Only if TRUE, the inherent CO2 has to be reported in the emission report A specification of the purpose of transferred CO2 out of an installation A specification of the calculation method used for calculation of any transferred CO2: direct/indirect measurement. A specification of the uncertainty involved with the chosen tier used for the mass of the CO2 transfer calculation method. +/- xx% (must be less than 1,5%) A specification of the conservative attribution methods for subtracting fraction of mass of transferred CO2 which originates from fossil fuels and materials in activities covered by Directive (in case transferred CO2 was generated from biomass) A specification of the conservative attribution methods for subtracting fraction of mass of transferred CO2 which originates from fossil fuels and materials in activities covered by Directive (in case installation was covered partially by EU ETS Directive) True/False element to specify whether the receiving installation is an installation part of the EU ETS System. TRUE if installation is part of the EU ETS System. The country of the receiving installation The unique Installation ID of the installation receiving the transferred CO2 Estimate of the combined yearly emissions of all N2O-units of the installation for the validity period of the permit A reference code to a stackemission element to which this data refers The type of N2O-activity from which N2O emissions result (nitric acid production, adipic acid production, glyoxal and glyoxylic acid production, caprolactam production) A specification whether abatement is used in the N2O-emission. TRUE if abatement is used. A specification of the determination method of annual N2O-emissions A specification of the method and parameters used to determine the quantity of materials (e.g. ammonia) used in the production process A specification of the maximum quantity of material used at full capacity A specification of the method and parameters used to determine the quantity of product produced as an hourly load, expressed as nitric acid (100%), adipic acid (100%), glyoxal and glyxylic acid and caprolactam per hour respectively A specification of the manner in which or the extent to which the N2O emitting process operates with variable loads A specification of the manner in which the operational management is carried out (Continuous, Standby, other) A reference to a source stream leading into an N2O-emitting unit A confirmation that the specific source stream is a de minimis source streams for N2O emission sources. TRUE if source is de minimis. A specification of the no-tier estimation method used for de minimus source stream of N2O A specification of the determination method for primary input air flow (in Nm3/h at standard conditions) A specification of the determination method for secondary input air flow (in Nm3/h at standard conditions) A specification of the determination method for seal input air flow (in Nm3/h at standard conditions) A specification of the determination method for the volume fraction of O2 in flue gas (such as paramagnetic alternating pressure, magnetic torsion balance or zirconium dioxide probe) A specification of evidence through measurements under normal operation conditions that the flue gas flow measured is sufficiently homogeneous to allow for the proposed measurement method A specification of the calculation method used based on a mass balance approach A description of the value (in kg/N2O per hour) to be used in case the measurement instrument fails A confirmation that the calculation of Annual CO2Equivalents is conducted according to the formula as stated in MRG. TRUE if calculation is conducted according to the formula. A specification of process conditions that deviate from normal operations An indication of the potential frequency of deviating conditions for specific process An indication of the potential duration of deviating conditions for specific process An estimate of the N2O emissions during deviating conditions (in tonnes) A reference to specific CCSEmissionSource A specification of the type of CCS-activity: (Carbon Capture, Transport, Geological Storage) A specification of the method used to calculate the amount of CO2 captured and transferred to the transportnetwork A specification of whether the CO2 capture is carried out by the same installation as the one from which the captured CO2 originates or whether the capture installation is a standalone capture installation An indication of whether method A or B is used to determine the emissions from the transport network A justification that the chosen methodology will lead to more reliable results with lower uncertainty of overall emissions using best available technology and knowledge at the time of application for the greenhouse gas emissions permit without leading to unreasonable costs A specification on how the emissions from transport network are determined using method B. A specification of how the emissions from fugitive emissions are determined, within method B A specification of what monitoring methodology is used to calculate the amount of CO2 leaked, within method B An analysis regarding potential situations of venting emissions A specification of what suitable monitoring methodology is used to calculate the amount of CO2 vented Total uncertainty of the overall emissions over the reporting period for whole transportnetwork, reported as ±xx% A specification of proof of network integrity by using representative temperature and pressure data A specification on how leakages during storage are determined Maximum overall uncertainty of the emissions leaked from storage complex over the reporting period for each leakage event, reported as ±xx% A specification of the adjustment made in case the overall uncertainty of the monitoring methodology exceeds 7,5% A unique identifier for the aircraft operator as stated in the CITL A unique designator registration markings (used as a call sign for Air Traffic Control) for all operated aircraft A specification of the Aviation Operator Status Code (Commercial or Non-Commercial) A specification of whether the aircraft operators conducts scheduled or non-scheduled flights or both (Scheduled Flights, Non-scheduled Flights or Scheduled and Non-scheduled Flights) A specification of the Scope of operations of the aircraft operator (Only Intra-EU Flights or Flights inside and outside the EU) A further description of the activities of the aircraft operator as necessary A confirmation that data sources used (for aerodrome location data) are published in AIP's in compliance with Annex 15 of the Chicago Convention or from a source using such AIP data A description of the methodology used to calculate great circle distances + 95km between aerodrome pairs A description of the data source used to calculate great circle distances + 95km between aerodrome pairs A specification of the tier used for calculation of passenger and bagage masses (Tier 1 - Default (100kg/person), Tier 2 - Actual or standard mass from Mass and Balance Documentation) A description of the source data used for passenger and bagage mass calculation (as required by EU OPS (Regulation (EC) 3922/91), or other international regulations) A specification whether there is a requirement to have mass and balance documentation for the relevant flights. TRUE if required. A concise description of the proposed alternative methodology for determining mass of freight and mail A description of the measurement devices used for measuring mass of freight and mail A notification whether the aircraft operator has a calibration certificate for the measurement device or not A confirmation that tare weight of all pallets and containers that are not payload and the service weight are excluded An estimate or prediction of the total annual fossil CO2-emissions for Annex 1 activities (in tonnes of CO2) A notification whether aircraft operator conducts less than 243 flights in period January to April A notification whether aircraft operator conducts less than 243 flights in period May to August A notification whether aircraft operator conducts less than 243 flights in period September to December A notification whether aircraft operator emits less than 10.000 tonees CO2 per year A notification that the simplified procedures for estimation of fuel consumption will be used. TRUE if used. An explanation to support eligibility for the simplified calculation method (annual emissions less than 10000 tonnes or flights per four months less than 243) A description of the method used to measure fuel consumption on a flight by flight basis (METHOD A: Fuel consumption in all flights will be measured according to the formula in Annex IV Part B of the legislation, METHOD B: Fuel consumption in all flights will be measured as Fuel on Board at departure gate-Fuel on board at the arrival gate, taking into account fuel consumed by the APU) A description of the data sources used to determine fuel uplift (As measured by fuel supplier or onboard measuring equipment) A description of the methods for transmitting, storing and retrieving data (Taken from fuel supplier, Recorded in Mass and Balance documentation, Recorded in aircraft technical log or Transmitted electronically from aircraft to operator) A justification why a chosen methodology (Method A or Method B) is not applied for all aircraft types A specification of the method used to determine the density used for fuel uplifts and fuel in tanks for this aircraft type (Actual density in aircraft tanks, Actual density of uplift, Temperature of uplift or Standard value (0.8kg per litre)) A justification for using the standard value if measurement is not feasible A specification of the source of temperature-density correlation tables A notification whether the aircraft operator has an ICAO Designator or not A reference to a specific aerodrome, using the ICAO designator A specification of the type of deviation from the general methodologies for determining fuel uplifts / fuel contained in the tank and density for specific aerodromes A justification of special circumstances that lead to the deviation A reference to a specific type of aircraft A specification of the uncertainty of measurement of fuel remaining in the tank A specification whether fuel uplifts are determined solely by the invoicde quantity of fuel or other appropriate information provided by the supplier (TRUE if they are, or FALSE if they are not) A specification whether on-board measurement devices for fuel uplift are supported by calibration certificates (TRUE if they are, or FALSE if they are not) A specification of the measurement equipment uncertainty (+/-%) A description of the manufacturer and technical key data of the measurement device A general description of the measurement principle of the measurement device A specification of the location of evidence of routine checks of the measurement device calibration (of no calibration certificate) A specification of the main sources of uncertainty for fuel consumption measurements A specification of the level of uncertainty for fuel consumption measurements A specification of additional comments on the level of uncertainty for fuel consumption measurements A specification of the aviation source stream (fuel type) used A general description of the source stream, especially for alternative or biofuels An estimate or prediction of the total annual fossil CO2-emissions for a specific source stream (fuel type) (in tonnes of CO2) A specification of the classification of a specific source stream (fuel type): major, minor or de minimis A specification of the fuel consumption uncertainty of a specific source stream (fuel type): less than 2,5%, less than 5,0% or N/A A specification of the tier number for a specific source stream (fuel type) A confirmation that the standard emission factors for commercial standard aviation fuels (3,15 tonnes of CO2 per tonne of fuel for Jet Kerosine, 3,10 tonnes of CO2 per tonne of fuel for Jet Gasoline and Aviation Gasoline) will be used A specification of the name of the tool used to estimate fuel consumption A specification of the name of the tool used to estimate fuel consumption, other than the ones mentioned in the list for FuelConsumptionEstimationToolName A confirmation that the European Commission has approved the tool used for fuel consumption estimation A specification of the name of the tool used to estimate fuel consumption if data is missing as a result of circumstances beyond the control of the aircraft operator and cannot be determined by an alternative method defined in the monitoring plan A description of the tool used to estimate fuel consumption if data is missing as a result of circumstances beyond the control of the aircraft operator and cannot be determined by an alternative method defined in the monitoring plan A short description of the methodology used to treat gaps regarding other parameters than fuel consumption A specification of quality management standards to which the installation site complies: - ISO 9001; ISO 14001; EMAS; Other, namely. A detailed description of the QMS system A specification of which part of the QMS system mentioned, covers the EU ETS installation Specification of the procedures to gather measurement data Specification of the procedures to determine the emissions (calculate, note and register, check and correct, etc.) Specification of the procedures to report the emissions (make report, check, correct, verificate, authorise etc.) A summary description of internal review of reported data carried out by operator A unique reference number for the complete Internal Review of Reported Data for the installation site Description of datastorage systems, calculation systems, data management systems with info about: Description, location, brand, type, regular back-up, back-up during disturbances A specification of details of any deviations from the requirements of general standards such as EN14181 and ISO 14956:2002 A summary description of the quality assurance and control overview used by the operator for the installation site (validation activities), including the following: - Quality assurance overview of measurement equipment, control activities and continuous measurement systems; - Description of calibration of measurement equipment, maintenance, inspection, corrections and corrective actions; - Description of resources used by operator. A unique reference number for the complete Quality Assurance and Control overview for each installation site A specification which sampling practice / procedure has been used for a fuel or material A specification which sampling standard has been used for monitoring calculation A specification of which sampling frequency has been used for monitoring calculation A specification of reasons why sampling and analysis uncertainty levels cannot be met by operator A specification which analysis practice / procedure has been used for a fuel or material A specification which analysis standard has been used for monitoring calculation A specification of which analysis frequency has been used for monitoring calculation A specification of the laboratory used for monitoring calculation A specification of laboratory accreditation (EN ISO 17025) for the laboratories used for monitroing calculation A specification of any additional laboratory quality and technical competence information for those laboratories used that do not have any ISO-17025 accreditation A specification of the analytical procedures for determination of Emission Factor, Conversion Factor, etc. A summary description of an annual plan for the calibration control activities, control, corrective action and other in-house validation activities including frequency, records, dates etc. A unique reference number for the complete Quality Assurance and Control Annual Plan for the installation site A summary description of the document management or records procedure for the installation site A unique reference number to the complete document management or records procedure for the installation site A summary description of the procedure the operator uses to register records for the installation site A unique reference number to the complete procedure the operator uses to register records for the installation site A summary description of the QA procedure for outsourced activities for the installation site A unique reference number to the complete QA procedure for outsourced activities for the installation site A summary description of the evaluation of the quality control (QC) system, internal audits and risk assessment implemented by the operator for the installation site A unique reference number to the complete evaluation of quality control (QC) system, internal audits and risk assessment implemented for the installation site A summary overview of the main responsibilities and roles involved in EU ETS Monitoring calculation A description of the main responsibilities and roles involved in EU ETS Monitoring calculation Contains the description of the additional information (such as a Member State specific code or reference) Contains the information (e.g. text, value) of the additional information File name of the document Format of the attached document The version of the document Document status General description of the document TRUE when value from MRG or National Standard Factor is provided, FALSE for a custom value A specification of the required tier for this specific data element A specification of the applied tier for this specific data element An explanation why a certain default tier was not complied with for this specific data element An explanation of the method of determination / derivation for this specific data element A unique name for this continuous emission measurement system in a stack emission out of N2O-emitting units within an installation site (under EU ETS regulations) A specification measurement technique used (i.e. IR Spectroscopy) Points measured in a stack emission out of N2O-emitting units within an installation site (under EU ETS regulations) A specification of the operating range for this continuous measurement system A specification of the alternative methods applied if measuring falls out of the operating range of the continuous measurement system and the situations when this may occur A specification of the assessment used to show that the tier uncertainty requirements referred in Section 2 of this Annex are complied with and the tier achieved A substitution value which has been determined in accordance with Annex I, Section 6.3 a and B in order to be used for each missing hour in case the measuring instrument fails or does not function properly, expressed in kg/N2O per hour A unique name for this continuous emission Measurement system for CCS A reference to a specific CCSItem A specification per source of the monitoring measurement method used. A specification for the method for determining CO2 concentration A specification of the method for determining flue gas flow Points of measurement to measure CO2 from a CCS emission source Total uncertainty of the overall emissions over the reporting period for the stack emission source within an installation site (under EU ETS regulation) or CCS measurement point, reported as ±xx% A specification of the corroborating calculation / or application of NEN EN 14181 (not applicable to continuous measurement of transferred CO2 in pipeline) A specification of evidence that CEMS approach would lead to unreasonable costs A specification of an alternative determination method for vented emissions, based on industry best practices A specification of the generic Aircraft Type by ICAO aircraft type designator A specification whether Jet Kerosine (Jet A1 or Jet A) will be used for specific type of aircraft A specification whether Jet Gasoline (Jet B) will be used for specific type of aircraft A specification whether Aviation Gasoline (AvGas) will be used for specific type of aircraft A specification whether Biofuel will be used for specific type of aircraft A specification whether other alternative fuel will be used for specific type of aircraft A specification of the number of this type of aircraft operated at time of submission of monitoring plan A unique name or title of the procedure used A unique Identification number of the procedure used A description of the procedure used A specification of the post or department responsible for the maintenance of data A specification of the location where records are kept A specification of the name of the system used The description for a specific measurement instrument A container for all ConnectionPoint elements A connection point describes one of the connections between the setup of the points in the installation: source streams, stacks and InstallationUnits and their respective monitoring methodology. A connection point only contains references to these parts, and is a textual representation of a diagram of the installation A specificiation of the elements of which the transport network consists A complex element describing the online gas analysers that are included in the monitoring plan The volume of fuel of the source stream(s) An attachment containing a process diagram with all relevant emissions points during typical operation and during restrictive and transition phases (e.g. breakdown periods or comissioning phases) A complex data type describing the Continuous Monitoring Method of N2O Concentration A complex element describing the monitoring method of CCS capture activities A complex element describing the monitoring method of CCS transfer activities A complex element describing the monitoring method of CCS Geological Storage activities A complex element describing the measurement method for the amount of CO2 that is transferred to a capture installation A complex element describing the measurement method for the amount of CO2 that is transferred to a transportnetwork or to a storage site A complex element describing the monitoring method of CCS transfer activities using method A A complex element describing the measurement method for the amount of CO2 that goes into the transport network A complex element describing the measurement method for the amount of CO2 that comes out of the transport network A complex element describing the measurement method for the amount of CO2-emissions vented from Geological Storage Injection activities A complex element describing the measurement method for the amount of fugitive CO2-emissions from Geological Storage Injection activities A complex element describing the measurement method for the amount of CO2-emissions vented from Geological Storage Enhanced Oil Recovery activities A complex element describing the measurement method for the amount of fugitive CO2-emissions from Geological Storage Enhanced Oil Recovery activities A complex element describing monitoring of leakages from Geological Storage complexes General Aviation Description data An attachment containing a copy of Annex 1 of the Air Operator Certificate as evidence (only for commercial aircraft operators) A complex element describing all aircraft types operated at the time of submission of this monitoring plan A complex element describing monitoring methodology for monitoring additional aircraft types A complex element describing monitoring methodology for monitoring completeness of emission sources A complex element describing monitoring methodology for monitoring completeness of the list of flights A complex element describing monitoring methodology for monitoring whether flights are covered by Annex 1 of the Directive A complex element describing monitoring methodology for measurement of the density used for fuel uplifts and fuel in tanks in both owned and leased-in aircraft (The procedure must include a description of the measurement instruments involved, or if measurement is not feasible, justification for applying the standard value) A complex element describing monitoring methodology for ensuring that the total uncertainty of fuel measurements will comply with the requirements of the selected tier (The procedure must therefore refer to calibration certificates of measurement systems, national laws, clauses in customer contracts of fuel suppliers' accuracy standards) A complex element describing monitoring methodology for ensuring regular cross-check between uplift quantity as provided by invoices and uplift quantity indicated by on-board measurement A complex element describing determination method for emission factors, net calorific values and biomass content of alternative fuels Complex element containing details of quality management roles and activities Details of the quality procedures used Details of the Quality Assurance procedures and processes applied Details regarding Quality Control of the installation A description (data flow) of all operational activities that have to be carried out by the operator with regards to data acquisition and handling for each installation site (from measurement to reporting). For each source stream the three steps should be taken, and it should be specified: a-task name+reference b-description of task (detailed, practical) c-frequency at which task is executed d-who is responsible for the task e-which resources are needed to fulfill the task f-how are these resources validated and controlled (this can be linked to QAAndControlOverview) A complex element describing the sampling procedures that are included in the monitoring plan A complex element describing the laboratory analyses that are included in the monitoring plan A graphic chart showing the directorate, lines of authority, control responsibility and vertical and horizontal interrelationships among departments and persons in an organisation. A specification of evidence that sampling and analysis is free of bias and respresentative Country (if not available in list) A globally unique identifier for the source stream (if not available in the list) A description of the methods for transmitting, storing and retrieving data (Taken from fuel supplier, Recorded in Mass and Balance documentation, Recorded in aircraft technical log or Transmitted electronically from aircraft to operator), if not available in the list A specification of the fuel, if not available in the list Indicates the type of the permit (e.g. environment permit, ETS permit, IPPC permit, etc.), if not available in the list The issuing authority for the air operating licence of the aircraft operator, if not available in the list A specification of the fuel consumption uncertainty of a specific source stream (fuel type), if not available in the list The issuing authority for the EU Operating Licence of the aircraft operator, if not available in the list A notification whether the aircraft operator has an Air Operator Certificate or not A specification of the issuing date of the Air Operator Certificate A specification of the scope of operations that is permitted under the Air Operator Certificate A notification whether the aircraft operator has an Operating Licence or not A specification of the issuing date of the Operating Licence "A specification of the scope of operations that is permitted under the Operating Licence A specification whether the aircraft type is operated at the moment A specification of the purpose of transferred CO2 out of an installation, if not available in the list